Revisions to Interrupt variable not getting called while executing another part

Code formatting, grammar

Source Link

edit approved Aug 7, 2015 at 20:51

1.1k
7
18

volatile byte _incomingFlag = 0;       
  
void onIncoming () {
             _incomingFlag = 1;
            Serial.println(F("You got an interrupt"));
            mySerial.println("ATH0");
           
            
        }   
        
        void setup () {
            
            /* First Start the module */
            Serial.begin(9600);
            Serial.println(F("Initializing module..."));
        
            powerOn();
            
            mySerial.begin(9600);
            
            sendcommand(F("AT"), F("OK"), 1000);
            sendcommand(F("AT+CLIP=1"), F("OK"), 1000);
            sendcommand(F("AT+CMGF=1"), F("OK"), 1000);
            
            /* We need to attach ringing Interrupt */
            attachInterrupt(M_RING_INTERRUPT, onIncoming, FALLING);
            
            
            delay(100);
        }
        
         
        
        void loop() {
                   
              if (_incomingFlag == 1) {
                  manageIncoming();
                 Serial.print(F("_incomingFlag: "));
                Serial.println(_incomingFlag);
                
             } else  {
                Serial.println(_incomingFlag);
                 Serial.println(F("not getting value"));
             }
            get_currentLocation();
            send_Location();
      }

I am trying to check the value of incomingFlag from the Looploop() . When iI get a call or an SMS the interrupt function is getting executed and incomingFlag is set to 1 but iI am not getting that value from the Looploop(). Everytime itsit's getting 0 if iI check the value while the send_Location function is executing ( datadata uploading part ). How can iI access the value of incomingFlag from the main Looploop().

volatile byte _incomingFlag = 0;       
 void onIncoming () {
             _incomingFlag = 1;
            Serial.println(F("You got an interrupt"));
            mySerial.println("ATH0");
           
            
        }   
        
        void setup () {
            
            /* First Start the module */
            Serial.begin(9600);
            Serial.println(F("Initializing module..."));
        
            powerOn();
            
            mySerial.begin(9600);
            
            sendcommand(F("AT"), F("OK"), 1000);
            sendcommand(F("AT+CLIP=1"), F("OK"), 1000);
            sendcommand(F("AT+CMGF=1"), F("OK"), 1000);
            
            /* We need to attach ringing Interrupt */
            attachInterrupt(M_RING_INTERRUPT, onIncoming, FALLING);
            
            
            delay(100);
        }
        
         
        
        void loop() {
                   
              if (_incomingFlag == 1) {
                  manageIncoming();
                 Serial.print(F("_incomingFlag: "));
                Serial.println(_incomingFlag);
                
             }else  {
                Serial.println(_incomingFlag);
                 Serial.println(F("not getting value"));
             }
            get_currentLocation();
            send_Location();
      }

I am trying to check the value of incomingFlag from the Loop() . When i get a call or an SMS the interrupt function is getting executed and incomingFlag is set to 1 but i am not getting that value from the Loop. Everytime its getting 0 if i check the value while the send_Location function is executing( data uploading part ). How can i access the value of incomingFlag from the main Loop().

volatile byte _incomingFlag = 0;
 
void onIncoming () {
    _incomingFlag = 1;
    Serial.println(F("You got an interrupt"));
    mySerial.println("ATH0");
}   
        
void setup () {
    /* First Start the module */
    Serial.begin(9600);
    Serial.println(F("Initializing module..."));
        
    powerOn();
            
    mySerial.begin(9600);
            
    sendcommand(F("AT"), F("OK"), 1000);
    sendcommand(F("AT+CLIP=1"), F("OK"), 1000);
    sendcommand(F("AT+CMGF=1"), F("OK"), 1000);
            
    /* We need to attach ringing Interrupt */
    attachInterrupt(M_RING_INTERRUPT, onIncoming, FALLING);
    
    delay(100);
}
      
void loop() {
    if (_incomingFlag == 1) {
        manageIncoming();
        Serial.print(F("_incomingFlag: "));
        Serial.println(_incomingFlag);
    } else  {
        Serial.println(_incomingFlag);
        Serial.println(F("not getting value"));
    }
    get_currentLocation();
    send_Location();
}

I am trying to check the value of incomingFlag from the loop() . When I get a call or an SMS the interrupt function is getting executed and incomingFlag is set to 1 but I am not getting that value from the loop(). Everytime it's getting 0 if I check the value while the send_Location function is executing (data uploading part). How can I access the value of incomingFlag from the main loop().

deleted 1389 characters in body

Source Link

edited Aug 6, 2015 at 15:40

Sachin

1
1

volatile byte _incomingFlag = 0;       
 void onIncoming () {
             _incomingFlag = 1;
            Serial.println(F("You got an interrupt"));
            mySerial.println("ATH0");
           
            
        }   
        
        void setup () {
            
            /* First Start the module */
            Serial.begin(9600);
            Serial.println(F("Initializing module..."));
        
            powerOn();
            
            mySerial.begin(9600);
            
            sendcommand(F("AT"), F("OK"), 1000);
            sendcommand(F("AT+CLIP=1"), F("OK"), 1000);
            sendcommand(F("AT+CMGF=1"), F("OK"), 1000);
            
            /* We need to attach ringing Interrupt */
            attachInterrupt(M_RING_INTERRUPT, onIncoming, FALLING);
            
            
            delay(100);
        }
        
         
        
        void loop() {
                   
              if (_incomingFlag == 1) {
                  manageIncoming();
                 Serial.print(F("_incomingFlag: "));
                Serial.println(_incomingFlag);
                
             }else  {
                Serial.println(_incomingFlag);
                 Serial.println(F("not getting value"));
             }
            get_currentLocation();
            send_Location();
      }

 
void connectTCP(){
    Serial.print(F("Memory Free : "));
    Serial.println(memoryFree());
    
    sendcommand( F("AT+CIPSHUT"), F("OK"), 5000 );
    sendcommand( F("AT+CPIN?"), F("OK"), 1000 );
    sendcommand( F("AT+CSQ"), F("OK"), 1000 );
    sendcommand( F("AT+CGATT?"), F("OK"), 1000 );
    
    sendcommand( F("AT+CSTT=\"CMNET\""), F("OK"), 10000 );
    sendcommand( F("AT+CIICR"), F("OK"), 10000 );
    sendcommand( F("AT+CIFSR"), F("OK"), 10000 );
    sendcommand( F("AT+CIPSTART=\"TCP\",\"www.myweb.com\",80"), F("OK"), 10000 );
    sendcommand( F("AT+CIPSEND"), F(">"), 10000 );
}


void postHTTP(const char* path, const char* data){
    int8_t content_length = 0;
    mySerial.print(F("POST "));
    mySerial.print(path);
    mySerial.println(F(" HTTP/1.1"));
    mySerial.println(F("Host: www.myweb.com"));
    mySerial.println(F("Content-Type: application/x-www-form-urlencoded"));
    mySerial.println(F("User-Agent: Arduino"));
    mySerial.print(F("Content-Length: "));
    content_length = strlen(data);
    mySerial.println(content_length);
    mySerial.println();
    mySerial.print(data);
    mySerial.println((char)26);
    readline(10000);
    sendcommand( F("AT+CIPCLOSE"), F("OK"), 5000 );

}

volatile byte _incomingFlag = 0;       
 void onIncoming () {
             _incomingFlag = 1;
            Serial.println(F("You got an interrupt"));
            mySerial.println("ATH0");
           
            
        }   
        
        void setup () {
            
            /* First Start the module */
            Serial.begin(9600);
            Serial.println(F("Initializing module..."));
        
            powerOn();
            
            mySerial.begin(9600);
            
            sendcommand(F("AT"), F("OK"), 1000);
            sendcommand(F("AT+CLIP=1"), F("OK"), 1000);
            sendcommand(F("AT+CMGF=1"), F("OK"), 1000);
            
            /* We need to attach ringing Interrupt */
            attachInterrupt(M_RING_INTERRUPT, onIncoming, FALLING);
            
            
            delay(100);
        }
        
         
        
        void loop() {
                   
              if (_incomingFlag == 1) {
                  manageIncoming();
                 Serial.print(F("_incomingFlag: "));
                Serial.println(_incomingFlag);
                
             }else  {
                Serial.println(_incomingFlag);
                 Serial.println(F("not getting value"));
             }
            get_currentLocation();
            send_Location();
      }

 
void connectTCP(){
    Serial.print(F("Memory Free : "));
    Serial.println(memoryFree());
    
    sendcommand( F("AT+CIPSHUT"), F("OK"), 5000 );
    sendcommand( F("AT+CPIN?"), F("OK"), 1000 );
    sendcommand( F("AT+CSQ"), F("OK"), 1000 );
    sendcommand( F("AT+CGATT?"), F("OK"), 1000 );
    
    sendcommand( F("AT+CSTT=\"CMNET\""), F("OK"), 10000 );
    sendcommand( F("AT+CIICR"), F("OK"), 10000 );
    sendcommand( F("AT+CIFSR"), F("OK"), 10000 );
    sendcommand( F("AT+CIPSTART=\"TCP\",\"www.myweb.com\",80"), F("OK"), 10000 );
    sendcommand( F("AT+CIPSEND"), F(">"), 10000 );
}


void postHTTP(const char* path, const char* data){
    int8_t content_length = 0;
    mySerial.print(F("POST "));
    mySerial.print(path);
    mySerial.println(F(" HTTP/1.1"));
    mySerial.println(F("Host: www.myweb.com"));
    mySerial.println(F("Content-Type: application/x-www-form-urlencoded"));
    mySerial.println(F("User-Agent: Arduino"));
    mySerial.print(F("Content-Length: "));
    content_length = strlen(data);
    mySerial.println(content_length);
    mySerial.println();
    mySerial.print(data);
    mySerial.println((char)26);
    readline(10000);
    sendcommand( F("AT+CIPCLOSE"), F("OK"), 5000 );

}

volatile byte _incomingFlag = 0;       
 void onIncoming () {
             _incomingFlag = 1;
            Serial.println(F("You got an interrupt"));
            mySerial.println("ATH0");
           
            
        }   
        
        void setup () {
            
            /* First Start the module */
            Serial.begin(9600);
            Serial.println(F("Initializing module..."));
        
            powerOn();
            
            mySerial.begin(9600);
            
            sendcommand(F("AT"), F("OK"), 1000);
            sendcommand(F("AT+CLIP=1"), F("OK"), 1000);
            sendcommand(F("AT+CMGF=1"), F("OK"), 1000);
            
            /* We need to attach ringing Interrupt */
            attachInterrupt(M_RING_INTERRUPT, onIncoming, FALLING);
            
            
            delay(100);
        }
        
         
        
        void loop() {
                   
              if (_incomingFlag == 1) {
                  manageIncoming();
                 Serial.print(F("_incomingFlag: "));
                Serial.println(_incomingFlag);
                
             }else  {
                Serial.println(_incomingFlag);
                 Serial.println(F("not getting value"));
             }
            get_currentLocation();
            send_Location();
      }

added 1398 characters in body

Source Link

edited Aug 6, 2015 at 13:44

Sachin

1
1

volatile byte _incomingFlag = 0;       
 void onIncoming () {
             _incomingFlag = 1;
            Serial.println(F("You got an interrupt"));
            mySerial.println("ATH0");
           
            
        }   
        
        void setup () {
            
            /* First Start the module */
            Serial.begin(9600);
            Serial.println(F("Initializing module..."));
        
            powerOn();
            
            mySerial.begin(9600);
            
            sendcommand(F("AT"), F("OK"), 1000);
            sendcommand(F("AT+CLIP=1"), F("OK"), 1000);
            sendcommand(F("AT+CMGF=1"), F("OK"), 1000);
            
            /* We need to attach ringing Interrupt */
            attachInterrupt(M_RING_INTERRUPT, onIncoming, FALLING);
            
            
            delay(100);
        }
        
         
        
        void loop() {
                   
              if (_incomingFlag == 1) {
                  manageIncoming();
                 Serial.print(F("_incomingFlag: "));
                Serial.println(_incomingFlag);
                
             }else  {
                Serial.println(_incomingFlag);
                 Serial.println(F("not getting value"));
             }
            get_currentLocation();
            send_Location();
      } 


void connectTCP(){
    Serial.print(F("Memory Free : "));
    Serial.println(memoryFree());
    
    sendcommand( F("AT+CIPSHUT"), F("OK"), 5000 );
    sendcommand( F("AT+CPIN?"), F("OK"), 1000 );
    sendcommand( F("AT+CSQ"), F("OK"), 1000 );
    sendcommand( F("AT+CGATT?"), F("OK"), 1000 );
    
    sendcommand( F("AT+CSTT=\"CMNET\""), F("OK"), 10000 );
    sendcommand( F("AT+CIICR"), F("OK"), 10000 );
    sendcommand( F("AT+CIFSR"), F("OK"), 10000 );
    sendcommand( F("AT+CIPSTART=\"TCP\",\"www.myweb.com\",80"), F("OK"), 10000 );
    sendcommand( F("AT+CIPSEND"), F(">"), 10000 );
}


void postHTTP(const char* path, const char* data){
    int8_t content_length = 0;
    mySerial.print(F("POST "));
    mySerial.print(path);
    mySerial.println(F(" HTTP/1.1"));
    mySerial.println(F("Host: www.myweb.com"));
    mySerial.println(F("Content-Type: application/x-www-form-urlencoded"));
    mySerial.println(F("User-Agent: Arduino"));
    mySerial.print(F("Content-Length: "));
    content_length = strlen(data);
    mySerial.println(content_length);
    mySerial.println();
    mySerial.print(data);
    mySerial.println((char)26);
    readline(10000);
    sendcommand( F("AT+CIPCLOSE"), F("OK"), 5000 );

}

volatile byte _incomingFlag = 0;       
 void onIncoming () {
             _incomingFlag = 1;
            Serial.println(F("You got an interrupt"));
            mySerial.println("ATH0");
           
            
        }   
        
        void setup () {
            
            /* First Start the module */
            Serial.begin(9600);
            Serial.println(F("Initializing module..."));
        
            powerOn();
            
            mySerial.begin(9600);
            
            sendcommand(F("AT"), F("OK"), 1000);
            sendcommand(F("AT+CLIP=1"), F("OK"), 1000);
            sendcommand(F("AT+CMGF=1"), F("OK"), 1000);
            
            /* We need to attach ringing Interrupt */
            attachInterrupt(M_RING_INTERRUPT, onIncoming, FALLING);
            
            
            delay(100);
        }
        
         
        
        void loop() {
                   
              if (_incomingFlag == 1) {
                  manageIncoming();
                 Serial.print(F("_incomingFlag: "));
                Serial.println(_incomingFlag);
                
             }else  {
                Serial.println(_incomingFlag);
                 Serial.println(F("not getting value"));
             }
            get_currentLocation();
            send_Location();
      }

volatile byte _incomingFlag = 0;       
 void onIncoming () {
             _incomingFlag = 1;
            Serial.println(F("You got an interrupt"));
            mySerial.println("ATH0");
           
            
        }   
        
        void setup () {
            
            /* First Start the module */
            Serial.begin(9600);
            Serial.println(F("Initializing module..."));
        
            powerOn();
            
            mySerial.begin(9600);
            
            sendcommand(F("AT"), F("OK"), 1000);
            sendcommand(F("AT+CLIP=1"), F("OK"), 1000);
            sendcommand(F("AT+CMGF=1"), F("OK"), 1000);
            
            /* We need to attach ringing Interrupt */
            attachInterrupt(M_RING_INTERRUPT, onIncoming, FALLING);
            
            
            delay(100);
        }
        
         
        
        void loop() {
                   
              if (_incomingFlag == 1) {
                  manageIncoming();
                 Serial.print(F("_incomingFlag: "));
                Serial.println(_incomingFlag);
                
             }else  {
                Serial.println(_incomingFlag);
                 Serial.println(F("not getting value"));
             }
            get_currentLocation();
            send_Location();
      } 


void connectTCP(){
    Serial.print(F("Memory Free : "));
    Serial.println(memoryFree());
    
    sendcommand( F("AT+CIPSHUT"), F("OK"), 5000 );
    sendcommand( F("AT+CPIN?"), F("OK"), 1000 );
    sendcommand( F("AT+CSQ"), F("OK"), 1000 );
    sendcommand( F("AT+CGATT?"), F("OK"), 1000 );
    
    sendcommand( F("AT+CSTT=\"CMNET\""), F("OK"), 10000 );
    sendcommand( F("AT+CIICR"), F("OK"), 10000 );
    sendcommand( F("AT+CIFSR"), F("OK"), 10000 );
    sendcommand( F("AT+CIPSTART=\"TCP\",\"www.myweb.com\",80"), F("OK"), 10000 );
    sendcommand( F("AT+CIPSEND"), F(">"), 10000 );
}


void postHTTP(const char* path, const char* data){
    int8_t content_length = 0;
    mySerial.print(F("POST "));
    mySerial.print(path);
    mySerial.println(F(" HTTP/1.1"));
    mySerial.println(F("Host: www.myweb.com"));
    mySerial.println(F("Content-Type: application/x-www-form-urlencoded"));
    mySerial.println(F("User-Agent: Arduino"));
    mySerial.print(F("Content-Length: "));
    content_length = strlen(data);
    mySerial.println(content_length);
    mySerial.println();
    mySerial.print(data);
    mySerial.println((char)26);
    readline(10000);
    sendcommand( F("AT+CIPCLOSE"), F("OK"), 5000 );

}

Source Link

asked Aug 6, 2015 at 13:13

Sachin

1
1

Loading

Stack Exchange Network

Return to Question