Skip to main content
Arduino

Return to Question

Bumped by Community user
Bumped by Community user
Bumped by Community user
deleted 1 character in body
Source Link
Maksym Sadovnychyy
Maksym Sadovnychyy
  • 1
  • 2

I have a trouble with following, few lines code. For some reason after few seconds Arduino uno stops responding into void loop section of code. I tried to remove serial communication, all print and println without any success. Is the problem comming from MMA_7455.h?

#include <MMA_7455.h>
#include <Servo.h>

int servoPin = 9;
int servoAngle = 0;

Servo servo;

MMA_7455 accel = MMA_7455();
char yVal;
char yVal_bkp;


void setup() {
    servo.attach(servoPin);
    accel.initSensitivity(2);
    accel.calibrateOffset(1.0, 26.0, -69.0);s;
}

void loop() {
    yVal = accel.readAxis('y'); //Read out the 'y' Axis

    if(yVal_bkp != yVal + 2 || yVal_bkp != yVal -2)
    {
        servo.write(90 + yVal);
        yVal_bkp = yVal;
    }
}

P.S. Servo is normal G90

I have a trouble with following, few lines code. For some reason after few seconds Arduino uno stops responding into void loop section of code. I tried to remove serial communication, all print and println without any success. Is the problem comming from MMA_7455.h?

#include <MMA_7455.h>
#include <Servo.h>

int servoPin = 9;
int servoAngle = 0;

Servo servo;

MMA_7455 accel = MMA_7455();
char yVal;
char yVal_bkp;


void setup() {
    servo.attach(servoPin);
    accel.initSensitivity(2);
    accel.calibrateOffset(1.0, 26.0, -69.0);s
}

void loop() {
    yVal = accel.readAxis('y'); //Read out the 'y' Axis

    if(yVal_bkp != yVal + 2 || yVal_bkp != yVal -2)
    {
        servo.write(90 + yVal);
        yVal_bkp = yVal;
    }
}

P.S. Servo is normal G90

I have a trouble with following, few lines code. For some reason after few seconds Arduino uno stops responding into void loop section of code. I tried to remove serial communication, all print and println without any success. Is the problem comming from MMA_7455.h?

#include <MMA_7455.h>
#include <Servo.h>

int servoPin = 9;
int servoAngle = 0;

Servo servo;

MMA_7455 accel = MMA_7455();
char yVal;
char yVal_bkp;


void setup() {
    servo.attach(servoPin);
    accel.initSensitivity(2);
    accel.calibrateOffset(1.0, 26.0, -69.0);
}

void loop() {
    yVal = accel.readAxis('y'); //Read out the 'y' Axis

    if(yVal_bkp != yVal + 2 || yVal_bkp != yVal -2)
    {
        servo.write(90 + yVal);
        yVal_bkp = yVal;
    }
}

P.S. Servo is normal G90

Source Link
Maksym Sadovnychyy
Maksym Sadovnychyy
  • 1
  • 2

Arduino uno unexpected void loop stop

I have a trouble with following, few lines code. For some reason after few seconds Arduino uno stops responding into void loop section of code. I tried to remove serial communication, all print and println without any success. Is the problem comming from MMA_7455.h?

#include <MMA_7455.h>
#include <Servo.h>

int servoPin = 9;
int servoAngle = 0;

Servo servo;

MMA_7455 accel = MMA_7455();
char yVal;
char yVal_bkp;


void setup() {
    servo.attach(servoPin);
    accel.initSensitivity(2);
    accel.calibrateOffset(1.0, 26.0, -69.0);s
}

void loop() {
    yVal = accel.readAxis('y'); //Read out the 'y' Axis

    if(yVal_bkp != yVal + 2 || yVal_bkp != yVal -2)
    {
        servo.write(90 + yVal);
        yVal_bkp = yVal;
    }
}

P.S. Servo is normal G90