Skip to main content
Arduino

Return to Question

added 77 characters in body
Source Link
Moosa Alismaili
Moosa Alismaili
  • 43
  • 5

How I can use multi smoke sensor in one code? I mean how can I use more than one sensor, where both sensors has the same purpose, like use smoke sensor in multi room. Similar to this code where one is used only. How I can more than one, in Arduino Uno R3,,

<per>
    int redLed = 12;
int greenLed = 11;
int buzzer = 10;
int smokeA0 = A5;
// Your threshold value
int sensorThres = 400;

void setup() {
  pinMode(redLed, OUTPUT);
 pinMode(greenLed, OUTPUT);
pinMode(buzzer, OUTPUT);
pinMode(smokeA0, INPUT);
Serial.begin(9600);
}

void loop() {
  int analogSensor = analogRead(smokeA0);

  Serial.print("Pin A0: ");
  Serial.println(analogSensor);
  // Checks if it has reached the threshold value
  if (analogSensor > sensorThres)
  {
    digitalWrite(redLed, HIGH);
    digitalWrite(greenLed, LOW);
    tone(buzzer, 1000, 200);
  }
  else
  {
    digitalWrite(redLed, LOW);
    digitalWrite(greenLed, HIGH);
    noTone(buzzer);
  }
  delay(100);
}

How I can add more than one sensor to get same purpose. check detect 1 and detect2 and detect 3 if one of this detection LED Red ON, Thanks`

How I can use multi smoke sensor in one code? I mean how can I use more than one sensor, where both sensors has the same purpose, like use smoke sensor in multi room. Similar to this code where one is used only. How I can more than one, in Arduino Uno R3,,

<per>
    int redLed = 12;
int greenLed = 11;
int buzzer = 10;
int smokeA0 = A5;
// Your threshold value
int sensorThres = 400;

void setup() {
  pinMode(redLed, OUTPUT);
 pinMode(greenLed, OUTPUT);
pinMode(buzzer, OUTPUT);
pinMode(smokeA0, INPUT);
Serial.begin(9600);
}

void loop() {
  int analogSensor = analogRead(smokeA0);

  Serial.print("Pin A0: ");
  Serial.println(analogSensor);
  // Checks if it has reached the threshold value
  if (analogSensor > sensorThres)
  {
    digitalWrite(redLed, HIGH);
    digitalWrite(greenLed, LOW);
    tone(buzzer, 1000, 200);
  }
  else
  {
    digitalWrite(redLed, LOW);
    digitalWrite(greenLed, HIGH);
    noTone(buzzer);
  }
  delay(100);
}

How I can add more than one sensor to get same purpose, Thanks`

How I can use multi smoke sensor in one code? I mean how can I use more than one sensor, where both sensors has the same purpose, like use smoke sensor in multi room. Similar to this code where one is used only. How I can more than one, in Arduino Uno R3,,

<per>
    int redLed = 12;
int greenLed = 11;
int buzzer = 10;
int smokeA0 = A5;
// Your threshold value
int sensorThres = 400;

void setup() {
  pinMode(redLed, OUTPUT);
 pinMode(greenLed, OUTPUT);
pinMode(buzzer, OUTPUT);
pinMode(smokeA0, INPUT);
Serial.begin(9600);
}

void loop() {
  int analogSensor = analogRead(smokeA0);

  Serial.print("Pin A0: ");
  Serial.println(analogSensor);
  // Checks if it has reached the threshold value
  if (analogSensor > sensorThres)
  {
    digitalWrite(redLed, HIGH);
    digitalWrite(greenLed, LOW);
    tone(buzzer, 1000, 200);
  }
  else
  {
    digitalWrite(redLed, LOW);
    digitalWrite(greenLed, HIGH);
    noTone(buzzer);
  }
  delay(100);
}

How I can add more than one sensor to get same purpose. check detect 1 and detect2 and detect 3 if one of this detection LED Red ON, Thanks`

improved grammar and formatting
Source Link
edit approved Sep 10, 2016 at 15:44
user24204
edit approved Sep 10, 2016 at 15:44
user24204

How I can use multi sensor in one code in arduinoArduino?

Hi How I can use multi smoke sensor in one code? I mean how I can I use more than one sensor, where both sensorsensors has the same purpose, like use smoke sensor in multi room Like. Similar to this code usewhere one is used only. How I can more than Oneone, in Arduino unoUno R3,,

int redLed = 12; int greenLed = 11; int buzzer = 10; int smokeA0 = A5; // Your threshold value int sensorThres = 400;

void setup() { pinMode(redLed, OUTPUT); pinMode(greenLed, OUTPUT); pinMode(buzzer, OUTPUT); pinMode(smokeA0, INPUT); Serial.begin(9600); }

void loop() { int analogSensor = analogRead(smokeA0);

<per>
    int redLed = 12;
int greenLed = 11;
int buzzer = 10;
int smokeA0 = A5;
// Your threshold value
int sensorThres = 400;

void setup() {
  pinMode(redLed, OUTPUT);
 pinMode(greenLed, OUTPUT);
pinMode(buzzer, OUTPUT);
pinMode(smokeA0, INPUT);
Serial.begin(9600);
}

void loop() {
  int analogSensor = analogRead(smokeA0);

  Serial.print("Pin A0: ");
  Serial.println(analogSensor);
  // Checks if it has reached the threshold value
  if (analogSensor > sensorThres)
  {
    digitalWrite(redLed, HIGH);
    digitalWrite(greenLed, LOW);
    tone(buzzer, 1000, 200);
  }
  else
  {
    digitalWrite(redLed, LOW);
    digitalWrite(greenLed, HIGH);
    noTone(buzzer);
  }
  delay(100);
}

Serial.print("Pin A0: "); Serial.println(analogSensor); // Checks if it has reached the threshold value if (analogSensor > sensorThres) { digitalWrite(redLed, HIGH); digitalWrite(greenLed, LOW); tone(buzzer, 1000, 200); } else { digitalWrite(redLed, LOW); digitalWrite(greenLedHow I can add more than one sensor to get same purpose, HIGH); noTone(buzzer); } delay(100); }Thanks`

How I can add more than one sensor to get same purpose, Thanks`

How I can use multi sensor in one code in arduino?

Hi How I can use multi smoke sensor in one code? I mean how I can use more than one sensor both sensor has same purpose, like use smoke sensor in multi room Like this code use one only How I can more than One, in Arduino uno R3,,

int redLed = 12; int greenLed = 11; int buzzer = 10; int smokeA0 = A5; // Your threshold value int sensorThres = 400;

void setup() { pinMode(redLed, OUTPUT); pinMode(greenLed, OUTPUT); pinMode(buzzer, OUTPUT); pinMode(smokeA0, INPUT); Serial.begin(9600); }

void loop() { int analogSensor = analogRead(smokeA0);

Serial.print("Pin A0: "); Serial.println(analogSensor); // Checks if it has reached the threshold value if (analogSensor > sensorThres) { digitalWrite(redLed, HIGH); digitalWrite(greenLed, LOW); tone(buzzer, 1000, 200); } else { digitalWrite(redLed, LOW); digitalWrite(greenLed, HIGH); noTone(buzzer); } delay(100); }

How I can add more than one sensor to get same purpose, Thanks`

How I can use multi sensor in one code in Arduino?

How I can use multi smoke sensor in one code? I mean how can I use more than one sensor, where both sensors has the same purpose, like use smoke sensor in multi room. Similar to this code where one is used only. How I can more than one, in Arduino Uno R3,,

<per>
    int redLed = 12;
int greenLed = 11;
int buzzer = 10;
int smokeA0 = A5;
// Your threshold value
int sensorThres = 400;

void setup() {
  pinMode(redLed, OUTPUT);
 pinMode(greenLed, OUTPUT);
pinMode(buzzer, OUTPUT);
pinMode(smokeA0, INPUT);
Serial.begin(9600);
}

void loop() {
  int analogSensor = analogRead(smokeA0);

  Serial.print("Pin A0: ");
  Serial.println(analogSensor);
  // Checks if it has reached the threshold value
  if (analogSensor > sensorThres)
  {
    digitalWrite(redLed, HIGH);
    digitalWrite(greenLed, LOW);
    tone(buzzer, 1000, 200);
  }
  else
  {
    digitalWrite(redLed, LOW);
    digitalWrite(greenLed, HIGH);
    noTone(buzzer);
  }
  delay(100);
}

How I can add more than one sensor to get same purpose, Thanks`

Source Link
Moosa Alismaili
Moosa Alismaili
  • 43
  • 5

How I can use multi sensor in one code in arduino?

Hi How I can use multi smoke sensor in one code? I mean how I can use more than one sensor both sensor has same purpose, like use smoke sensor in multi room Like this code use one only How I can more than One, in Arduino uno R3,,

int redLed = 12; int greenLed = 11; int buzzer = 10; int smokeA0 = A5; // Your threshold value int sensorThres = 400;

void setup() { pinMode(redLed, OUTPUT); pinMode(greenLed, OUTPUT); pinMode(buzzer, OUTPUT); pinMode(smokeA0, INPUT); Serial.begin(9600); }

void loop() { int analogSensor = analogRead(smokeA0);

Serial.print("Pin A0: "); Serial.println(analogSensor); // Checks if it has reached the threshold value if (analogSensor > sensorThres) { digitalWrite(redLed, HIGH); digitalWrite(greenLed, LOW); tone(buzzer, 1000, 200); } else { digitalWrite(redLed, LOW); digitalWrite(greenLed, HIGH); noTone(buzzer); } delay(100); }

How I can add more than one sensor to get same purpose, Thanks`