Skip to main content
Arduino

Return to Answer

added 1 character in body
Source Link
dda
dda
  • 1.6k
  • 1
  • 12
  • 18

I see the main question you are asking asis:"I "I need to send a hex file instead of code to my client. I want to keep my source code with me."

The mechanics of the final hardware solution aren't supplied but I will guess that your client is also using an Arduino or at least the same ATmelAtmel chip that you have in your Arduino, and will be using that chip to control the ESP8266.

When you build your sketch, there is a .hex file created that you can send to your client.

There are a few ways to keep the hex file around, and IDE 1.6.5 and up has a way to easily find this file:

Sketch > Export Compiled Binary The sketch will compile.

Sketch > Show Sketch Folder The .hex file will be in the sketch folder.

You can send this hex file to your customer.

If he is using an Arduino or ATMega-based solution to connect to the ESP8266, then the hex file can be loaded into his Arduino or to his Atmel chip. HoweverHowever, the Arduino IDE doesn't support import of hex files at this time.

Your client would have to load that hex file onto the Arduino with aan ISP programmer of some sort. ThereThere are many ways to do this, and the best one for you will depend upon your circumstances and your client's skillsetskill set.

If the client is using an Arduino or has just embedded the same ATmel chip that is in your Arduino into his solution, you could also just program your Arduino, and then send him that chip.

I see the main question you are asking as:"I need to send a hex file instead of code to my client. I want to keep my source code with me."

The mechanics of the final hardware solution aren't supplied but I will guess that your client is also using an Arduino or at least the same ATmel chip that you have in your Arduino, and will be using that chip to control the ESP8266.

When you build your sketch, there is a .hex file created that you can send to your client.

There are a few ways to keep the hex file around, and IDE 1.6.5 and up has a way to easily find this file:

Sketch > Export Compiled Binary The sketch will compile.

Sketch > Show Sketch Folder The .hex file will be in the sketch folder.

You can send this hex file to your customer.

If he is using an Arduino or ATMega-based solution to connect to the ESP8266, then the hex file can be loaded into his Arduino or to his Atmel chip. However, the Arduino IDE doesn't support import of hex files at this time.

Your client would have to load that hex file onto the Arduino with a ISP programmer of some sort. There are many ways to do this, and the best one for you will depend upon your circumstances and your client's skillset.

If the client is using an Arduino or has just embedded the same ATmel chip that is in your Arduino into his solution, you could also just program your Arduino, and then send him that chip.

I see the main question you are asking is: "I need to send a hex file instead of code to my client. I want to keep my source code with me."

The mechanics of the final hardware solution aren't supplied but I will guess that your client is also using an Arduino or at least the same Atmel chip that you have in your Arduino, and will be using that chip to control the ESP8266.

When you build your sketch, there is a .hex file created that you can send to your client.

There are a few ways to keep the hex file around, and IDE 1.6.5 and up has a way to easily find this file:

Sketch > Export Compiled Binary The sketch will compile.

Sketch > Show Sketch Folder The .hex file will be in the sketch folder.

You can send this hex file to your customer.

If he is using an Arduino or ATMega-based solution to connect to the ESP8266, then the hex file can be loaded into his Arduino or to his Atmel chip. However, the Arduino IDE doesn't support import of hex files at this time.

Your client would have to load that hex file onto the Arduino with an ISP programmer of some sort. There are many ways to do this, and the best one for you will depend upon your circumstances and your client's skill set.

If the client is using an Arduino or has just embedded the same ATmel chip that is in your Arduino into his solution, you could also just program your Arduino, and then send him that chip.

Source Link
TooManyHandles
TooManyHandles
  • 113
  • 1
  • 6

I see the main question you are asking as:"I need to send a hex file instead of code to my client. I want to keep my source code with me."

The mechanics of the final hardware solution aren't supplied but I will guess that your client is also using an Arduino or at least the same ATmel chip that you have in your Arduino, and will be using that chip to control the ESP8266.

When you build your sketch, there is a .hex file created that you can send to your client.

There are a few ways to keep the hex file around, and IDE 1.6.5 and up has a way to easily find this file:

Sketch > Export Compiled Binary The sketch will compile.

Sketch > Show Sketch Folder The .hex file will be in the sketch folder.

You can send this hex file to your customer.

If he is using an Arduino or ATMega-based solution to connect to the ESP8266, then the hex file can be loaded into his Arduino or to his Atmel chip. However, the Arduino IDE doesn't support import of hex files at this time.

Your client would have to load that hex file onto the Arduino with a ISP programmer of some sort. There are many ways to do this, and the best one for you will depend upon your circumstances and your client's skillset.

If the client is using an Arduino or has just embedded the same ATmel chip that is in your Arduino into his solution, you could also just program your Arduino, and then send him that chip.