Skip to main content
Arduino

Return to Answer

added 22 characters in body
Source Link
user31481
user31481

Following the tutorial on http://www.instructables.com/id/Arduino-Examples-2-Use-an-Arduino-as-a-FTDI-Progr/ I was able to upload the blink sketch to the Pro Mini 5V version with an Arduino Nano. After I tried uploading the sketch that I really wanted to use but got many errors in the IDE I tried a couple more with no luck. I had stumble on another article earlier about using the Arduino Nano to program the Pro Mini http://www.electronicsmayhem.com/?p=31. I had tried that method but with no luck but using the first tutorial & only changing one thing from it with info from the article i mentioned I was able to upload the sketch without any errors. The only thing I changed was I didn't connect the TX from the Nano to the TXI of the Mini. Arduino Nano Pro Mini 5V GND-------------GND 5V--------------VCC RX--------------RX1 Reset-----------GRN(DTR)

   Arduino Nano     Pro Mini 5V
       GND-------------GND
       5V--------------VCC
       RX--------------RX1
       Reset-----------GRN(DTR)

Following the tutorial on http://www.instructables.com/id/Arduino-Examples-2-Use-an-Arduino-as-a-FTDI-Progr/ I was able to upload the blink sketch to the Pro Mini 5V version with an Arduino Nano. After I tried uploading the sketch that I really wanted to use but got many errors in the IDE I tried a couple more with no luck. I had stumble on another article earlier about using the Arduino Nano to program the Pro Mini http://www.electronicsmayhem.com/?p=31. I had tried that method but with no luck but using the first tutorial & only changing one thing from it with info from the article i mentioned I was able to upload the sketch without any errors. The only thing I changed was I didn't connect the TX from the Nano to the TXI of the Mini. Arduino Nano Pro Mini 5V GND-------------GND 5V--------------VCC RX--------------RX1 Reset-----------GRN(DTR)

Following the tutorial on http://www.instructables.com/id/Arduino-Examples-2-Use-an-Arduino-as-a-FTDI-Progr/ I was able to upload the blink sketch to the Pro Mini 5V version with an Arduino Nano. After I tried uploading the sketch that I really wanted to use but got many errors in the IDE I tried a couple more with no luck. I had stumble on another article earlier about using the Arduino Nano to program the Pro Mini http://www.electronicsmayhem.com/?p=31. I had tried that method but with no luck but using the first tutorial & only changing one thing from it with info from the article i mentioned I was able to upload the sketch without any errors. The only thing I changed was I didn't connect the TX from the Nano to the TXI of the Mini.

   Arduino Nano     Pro Mini 5V
       GND-------------GND
       5V--------------VCC
       RX--------------RX1
       Reset-----------GRN(DTR)
Source Link
CmA.Anon
CmA.Anon
  • 1

Following the tutorial on http://www.instructables.com/id/Arduino-Examples-2-Use-an-Arduino-as-a-FTDI-Progr/ I was able to upload the blink sketch to the Pro Mini 5V version with an Arduino Nano. After I tried uploading the sketch that I really wanted to use but got many errors in the IDE I tried a couple more with no luck. I had stumble on another article earlier about using the Arduino Nano to program the Pro Mini http://www.electronicsmayhem.com/?p=31. I had tried that method but with no luck but using the first tutorial & only changing one thing from it with info from the article i mentioned I was able to upload the sketch without any errors. The only thing I changed was I didn't connect the TX from the Nano to the TXI of the Mini. Arduino Nano Pro Mini 5V GND-------------GND 5V--------------VCC RX--------------RX1 Reset-----------GRN(DTR)