Skip to main content
Arduino

Return to Question

added 766 characters in body
Source Link
chrisl
chrisl
  • 16.6k
  • 2
  • 18
  • 27

Sketch uses 6360 bytes (22%) of program storage space. Maximum is 28672 bytes.

Global variables use 351 bytes of dynamic memory.

Forcing reset using 1200bps open/close on port COM13

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

Uploading using selected port: COM13

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\hardware\tools\avr/bin/avrdude -CC:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\hardware\tools\avr/etc/avrdude.conf -v -patmega32u4 -cavr109 -PCOM13 -b57600 -D -Uflash:w:C:\Users\Owner\AppData\Local\Temp\arduino_build_570140/sorting_numbers_test.ino.hex:i

avrdude: Version 6.3-20190619

     Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/

     Copyright (c) 2007-2014 Joerg Wunsch



     System wide configuration file is "C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\hardware\tools\avr/etc/avrdude.conf"



     Using Port                    : COM13

     Using Programmer              : avr109

     Overriding Baud Rate          : 57600

     AVR Part                      : ATmega32U4

     Chip Erase delay              : 9000 us

     PAGEL                         : PD7

     BS2                           : PA0

     RESET disposition             : dedicated

     RETRY pulse                   : SCK

     serial program mode           : yes

     parallel program mode         : yes

     Timeout                       : 200

     StabDelay                     : 100

     CmdexeDelay                   : 25

     SyncLoops                     : 32

     ByteDelay                     : 0

     PollIndex                     : 3

     PollValue                     : 0x53

     Memory Detail                 :



                              Block Poll               Page                       Polled

       Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack

       ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------

       eeprom        65    20     4    0 no       1024    4      0  9000  9000 0x00 0x00

       flash         65     6   128    0 yes     32768  128    256  4500  4500 0x00 0x00

       lfuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00

       hfuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00

       efuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00

       lock           0     0     0    0 no          1    0      0  9000  9000 0x00 0x00

       calibration    0     0     0    0 no          1    0      0     0     0 0x00 0x00

       signature      0     0     0    0 no          3    0      0     0     0 0x00 0x00



     Programmer Type : butterfly

     Description     : Atmel AppNote AVR109 Boot Loader

Connecting to programmer: .avrdude: butterfly_recv(): programmer is not responding

avrdude: butterfly_recv(): programmer is not responding

avrdude: butterfly_recv(): programmer is not responding

avrdude: butterfly_recv(): programmer is not responding

avrdude: butterfly_recv(): programmer is not responding

avrdude: butterfly_recv(): programmer is not responding

Found programmer: Id = "F"; type = @

Sketch uses 6360 bytes (22%) of program storage space. Maximum is 28672 bytes.

Global variables use 351 bytes of dynamic memory.

Forcing reset using 1200bps open/close on port COM13

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

Uploading using selected port: COM13

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\hardware\tools\avr/bin/avrdude -CC:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\hardware\tools\avr/etc/avrdude.conf -v -patmega32u4 -cavr109 -PCOM13 -b57600 -D -Uflash:w:C:\Users\Owner\AppData\Local\Temp\arduino_build_570140/sorting_numbers_test.ino.hex:i 



avrdude: Version 6.3-20190619

         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/

         Copyright (c) 2007-2014 Joerg Wunsch



         System wide configuration file is "C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\hardware\tools\avr/etc/avrdude.conf"



         Using Port                    : COM13

         Using Programmer              : avr109

         Overriding Baud Rate          : 57600

         AVR Part                      : ATmega32U4

         Chip Erase delay              : 9000 us

         PAGEL                         : PD7

         BS2                           : PA0

         RESET disposition             : dedicated

         RETRY pulse                   : SCK

         serial program mode           : yes

         parallel program mode         : yes

         Timeout                       : 200

         StabDelay                     : 100

         CmdexeDelay                   : 25

         SyncLoops                     : 32

         ByteDelay                     : 0

         PollIndex                     : 3

         PollValue                     : 0x53

         Memory Detail                 :



                                  Block Poll               Page                       Polled

           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack

           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------

           eeprom        65    20     4    0 no       1024    4      0  9000  9000 0x00 0x00

           flash         65     6   128    0 yes     32768  128    256  4500  4500 0x00 0x00

           lfuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00

           hfuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00

           efuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00

           lock           0     0     0    0 no          1    0      0  9000  9000 0x00 0x00

           calibration    0     0     0    0 no          1    0      0     0     0 0x00 0x00

           signature      0     0     0    0 no          3    0      0     0     0 0x00 0x00



         Programmer Type : butterfly

         Description     : Atmel AppNote AVR109 Boot Loader



Connecting to programmer: .avrdude: butterfly_recv(): programmer is not responding



avrdude: butterfly_recv(): programmer is not responding

avrdude: butterfly_recv(): programmer is not responding

avrdude: butterfly_recv(): programmer is not responding

avrdude: butterfly_recv(): programmer is not responding

avrdude: butterfly_recv(): programmer is not responding

Found programmer: Id = "F"; type = @

    Software Version = �.v; Hardware Version = �.

avrdude: butterfly_recv(): programmer is not responding

avrdude: butterfly_recv(): programmer is not responding

avrdude: error: buffered memory access not supported. Maybe it isn't

a butterfly/AVR109 but a AVR910 device?

avrdude: initialization failed, rc=-1


avrdude: butterfly_recv(): programmer is not responding

avrdude: butterfly_recv(): programmer is not responding

avrdude: error: buffered memory access not supported. Maybe it isn't

a butterfly/AVR109 but a AVR910 device?

avrdude: initialization failed, rc=-1

         Double check connections and try again, or use -F to override

         this check.



avrdude: butterfly_recv(): programmer is not responding

avrdude: error: programmer did not respond to command: leave prog mode

avrdude: butterfly_recv(): programmer is not responding

avrdude: error: programmer did not respond to command: exit bootloader



avrdude done.  Thank you.



the selected serial port 

 does not exist or your board is not connected



This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.>

avrdude: butterfly_recv(): programmer is not responding

avrdude: error: programmer did not respond to command: leave prog mode

avrdude: butterfly_recv(): programmer is not responding

avrdude: error: programmer did not respond to command: exit bootloader

avrdude done. Thank you.

the selected serial port

does not exist or your board is not connected

This report would have more information with "Show verbose output during compilation" option enabled in File -> Preferences.>

Sketch uses 6360 bytes (22%) of program storage space. Maximum is 28672 bytes.

Global variables use 351 bytes of dynamic memory.

Forcing reset using 1200bps open/close on port COM13

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

Uploading using selected port: COM13

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\hardware\tools\avr/bin/avrdude -CC:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\hardware\tools\avr/etc/avrdude.conf -v -patmega32u4 -cavr109 -PCOM13 -b57600 -D -Uflash:w:C:\Users\Owner\AppData\Local\Temp\arduino_build_570140/sorting_numbers_test.ino.hex:i

avrdude: Version 6.3-20190619

     Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/

     Copyright (c) 2007-2014 Joerg Wunsch



     System wide configuration file is "C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\hardware\tools\avr/etc/avrdude.conf"



     Using Port                    : COM13

     Using Programmer              : avr109

     Overriding Baud Rate          : 57600

     AVR Part                      : ATmega32U4

     Chip Erase delay              : 9000 us

     PAGEL                         : PD7

     BS2                           : PA0

     RESET disposition             : dedicated

     RETRY pulse                   : SCK

     serial program mode           : yes

     parallel program mode         : yes

     Timeout                       : 200

     StabDelay                     : 100

     CmdexeDelay                   : 25

     SyncLoops                     : 32

     ByteDelay                     : 0

     PollIndex                     : 3

     PollValue                     : 0x53

     Memory Detail                 :



                              Block Poll               Page                       Polled

       Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack

       ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------

       eeprom        65    20     4    0 no       1024    4      0  9000  9000 0x00 0x00

       flash         65     6   128    0 yes     32768  128    256  4500  4500 0x00 0x00

       lfuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00

       hfuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00

       efuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00

       lock           0     0     0    0 no          1    0      0  9000  9000 0x00 0x00

       calibration    0     0     0    0 no          1    0      0     0     0 0x00 0x00

       signature      0     0     0    0 no          3    0      0     0     0 0x00 0x00



     Programmer Type : butterfly

     Description     : Atmel AppNote AVR109 Boot Loader

Connecting to programmer: .avrdude: butterfly_recv(): programmer is not responding

avrdude: butterfly_recv(): programmer is not responding

avrdude: butterfly_recv(): programmer is not responding

avrdude: butterfly_recv(): programmer is not responding

avrdude: butterfly_recv(): programmer is not responding

avrdude: butterfly_recv(): programmer is not responding

Found programmer: Id = "F"; type = @

Software Version = �.v; Hardware Version = �.

avrdude: butterfly_recv(): programmer is not responding

avrdude: butterfly_recv(): programmer is not responding

avrdude: error: buffered memory access not supported. Maybe it isn't

a butterfly/AVR109 but a AVR910 device?

avrdude: initialization failed, rc=-1

     Double check connections and try again, or use -F to override

     this check.

avrdude: butterfly_recv(): programmer is not responding

avrdude: error: programmer did not respond to command: leave prog mode

avrdude: butterfly_recv(): programmer is not responding

avrdude: error: programmer did not respond to command: exit bootloader

avrdude done. Thank you.

the selected serial port

does not exist or your board is not connected

This report would have more information with "Show verbose output during compilation" option enabled in File -> Preferences.>

Sketch uses 6360 bytes (22%) of program storage space. Maximum is 28672 bytes.

Global variables use 351 bytes of dynamic memory.

Forcing reset using 1200bps open/close on port COM13

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

Uploading using selected port: COM13

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\hardware\tools\avr/bin/avrdude -CC:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\hardware\tools\avr/etc/avrdude.conf -v -patmega32u4 -cavr109 -PCOM13 -b57600 -D -Uflash:w:C:\Users\Owner\AppData\Local\Temp\arduino_build_570140/sorting_numbers_test.ino.hex:i 



avrdude: Version 6.3-20190619

         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/

         Copyright (c) 2007-2014 Joerg Wunsch



         System wide configuration file is "C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\hardware\tools\avr/etc/avrdude.conf"



         Using Port                    : COM13

         Using Programmer              : avr109

         Overriding Baud Rate          : 57600

         AVR Part                      : ATmega32U4

         Chip Erase delay              : 9000 us

         PAGEL                         : PD7

         BS2                           : PA0

         RESET disposition             : dedicated

         RETRY pulse                   : SCK

         serial program mode           : yes

         parallel program mode         : yes

         Timeout                       : 200

         StabDelay                     : 100

         CmdexeDelay                   : 25

         SyncLoops                     : 32

         ByteDelay                     : 0

         PollIndex                     : 3

         PollValue                     : 0x53

         Memory Detail                 :



                                  Block Poll               Page                       Polled

           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack

           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------

           eeprom        65    20     4    0 no       1024    4      0  9000  9000 0x00 0x00

           flash         65     6   128    0 yes     32768  128    256  4500  4500 0x00 0x00

           lfuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00

           hfuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00

           efuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00

           lock           0     0     0    0 no          1    0      0  9000  9000 0x00 0x00

           calibration    0     0     0    0 no          1    0      0     0     0 0x00 0x00

           signature      0     0     0    0 no          3    0      0     0     0 0x00 0x00



         Programmer Type : butterfly

         Description     : Atmel AppNote AVR109 Boot Loader



Connecting to programmer: .avrdude: butterfly_recv(): programmer is not responding



avrdude: butterfly_recv(): programmer is not responding

avrdude: butterfly_recv(): programmer is not responding

avrdude: butterfly_recv(): programmer is not responding

avrdude: butterfly_recv(): programmer is not responding

avrdude: butterfly_recv(): programmer is not responding

Found programmer: Id = "F"; type = @

    Software Version = �.v; Hardware Version = �. 

avrdude: butterfly_recv(): programmer is not responding

avrdude: butterfly_recv(): programmer is not responding

avrdude: error: buffered memory access not supported. Maybe it isn't

a butterfly/AVR109 but a AVR910 device?

avrdude: initialization failed, rc=-1

         Double check connections and try again, or use -F to override

         this check.



avrdude: butterfly_recv(): programmer is not responding

avrdude: error: programmer did not respond to command: leave prog mode

avrdude: butterfly_recv(): programmer is not responding

avrdude: error: programmer did not respond to command: exit bootloader



avrdude done.  Thank you.



the selected serial port 

 does not exist or your board is not connected



This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.>
Source Link
Ryan Russel
Ryan Russel
  • 11
  • 1

why is my arduino stuck on uploading?

my arduino for the playground adafruit express gets stuck uploading, and is saying that it is not recognizing the ports. <Arduino: 1.8.16 (Windows Store 1.8.51.0) (Windows 10), Board: "Adafruit Circuit Playground"

Sketch uses 6360 bytes (22%) of program storage space. Maximum is 28672 bytes.

Global variables use 351 bytes of dynamic memory.

Forcing reset using 1200bps open/close on port COM13

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

PORTS {COM13, } / {COM13, } => {}

Uploading using selected port: COM13

C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\hardware\tools\avr/bin/avrdude -CC:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\hardware\tools\avr/etc/avrdude.conf -v -patmega32u4 -cavr109 -PCOM13 -b57600 -D -Uflash:w:C:\Users\Owner\AppData\Local\Temp\arduino_build_570140/sorting_numbers_test.ino.hex:i

avrdude: Version 6.3-20190619

     Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/

     Copyright (c) 2007-2014 Joerg Wunsch



     System wide configuration file is "C:\Program Files\WindowsApps\ArduinoLLC.ArduinoIDE_1.8.51.0_x86__mdqgnx93n4wtt\hardware\tools\avr/etc/avrdude.conf"



     Using Port                    : COM13

     Using Programmer              : avr109

     Overriding Baud Rate          : 57600

     AVR Part                      : ATmega32U4

     Chip Erase delay              : 9000 us

     PAGEL                         : PD7

     BS2                           : PA0

     RESET disposition             : dedicated

     RETRY pulse                   : SCK

     serial program mode           : yes

     parallel program mode         : yes

     Timeout                       : 200

     StabDelay                     : 100

     CmdexeDelay                   : 25

     SyncLoops                     : 32

     ByteDelay                     : 0

     PollIndex                     : 3

     PollValue                     : 0x53

     Memory Detail                 :



                              Block Poll               Page                       Polled

       Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack

       ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------

       eeprom        65    20     4    0 no       1024    4      0  9000  9000 0x00 0x00

       flash         65     6   128    0 yes     32768  128    256  4500  4500 0x00 0x00

       lfuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00

       hfuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00

       efuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00

       lock           0     0     0    0 no          1    0      0  9000  9000 0x00 0x00

       calibration    0     0     0    0 no          1    0      0     0     0 0x00 0x00

       signature      0     0     0    0 no          3    0      0     0     0 0x00 0x00



     Programmer Type : butterfly

     Description     : Atmel AppNote AVR109 Boot Loader

Connecting to programmer: .avrdude: butterfly_recv(): programmer is not responding

avrdude: butterfly_recv(): programmer is not responding

avrdude: butterfly_recv(): programmer is not responding

avrdude: butterfly_recv(): programmer is not responding

avrdude: butterfly_recv(): programmer is not responding

avrdude: butterfly_recv(): programmer is not responding

Found programmer: Id = "F"; type = @

Software Version = �.v; Hardware Version = �.

avrdude: butterfly_recv(): programmer is not responding

avrdude: butterfly_recv(): programmer is not responding

avrdude: error: buffered memory access not supported. Maybe it isn't

a butterfly/AVR109 but a AVR910 device?

avrdude: initialization failed, rc=-1

     Double check connections and try again, or use -F to override

     this check.

avrdude: butterfly_recv(): programmer is not responding

avrdude: error: programmer did not respond to command: leave prog mode

avrdude: butterfly_recv(): programmer is not responding

avrdude: error: programmer did not respond to command: exit bootloader

avrdude done. Thank you.

the selected serial port

does not exist or your board is not connected

This report would have more information with "Show verbose output during compilation" option enabled in File -> Preferences.>