| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This is a scripted change:
$ mkdir man/;
$ mv man* man/;
$ ln -st . man/man*;
$ find share/mk/ -type f \
| xargs grep -l '^MANDIR *:=' \
| xargs sed -i '/^MANDIR *:=/s,$,/man,';
$ find share/mk/dist/ -type f \
| xargs grep -l man \
| xargs sed -i 's,man%,man/%,g';
Link: <https://lore.kernel.org/linux-man/YxcV4h+Xn7cd6+q2@pevik/T/>
Cc: Petr Vorel <pvorel@suse.cz>
Cc: Jakub Wilk <jwilk@jwilk.net>
Cc: Stefan Puiu <stefan.puiu@gmail.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
|
|
Signed-off-by: Jing Peng <pj.hades@gmail.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
|
|
Signed-off-by: Alejandro Colomar <alx@kernel.org>
|
|
'NULL' is a null pointer _constant_. A 'null pointer' is a broader
concept. 'NULL pointer' is not a thing. See the link below.
Link: <https://software.codidact.com/posts/278657>
Fixes: 9517cf56fcbd ("pidfd_send_signal.2: New page documenting pidfd_send_signal(2)")
Fixes: fcd1bee32aa9 ("bpf.2: Improvements after comments from Daniel Borkmann")
Fixes: 5d92031a43b4 ("execve.2: Explicitly note that argv[argc] == NULL in the new program")
Fixes: 9f79744c9af3 ("keyctl.2: Improve KEYCTL_INSTANTIATE details")
Fixes: 1b6ab34c5320 ("attributes.7: New page describing POSIX safety concepts")
Reported-by: Helge Kreutzmann <debian@helgefjell.de>
Cc: Mario Blaettermann <mario.blaettermann@gmail.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
|
|
We're trying to "standardize" on a paragraphing macro from the three
equivalent ones (P, PP, LP). We (somewhat arbitrarily) agreed on P.
Scripted change:
$ find man* -type f | xargs sed -i '/\.PP/s/PP/P/'
$ find man* -type f | xargs sed -i '/\.LP/s/LP/P/'
Suggested-by: "G. Branden Robinson" <branden@debian.org>
Cc: Ingo Schwarze <schwarze@openbsd.org>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
|
|
Since commit c3494801cd1785e2 ("bpf: check pending signals while
verifying programs"), bpf() may also fail with EAGAIN if the verifier
detects pending signals.
This was triggered in the cmld of GyroidOS when loading a cgroups device
program during container start. We had a look in the man page and were
confused that EAGAIN was not listed as possible error. Digging in the
kernel source revealed the EAGAIN in the verifier introduced by the
commit above. Further investigation showed that libbpf already wraps
that case, by a retry loop.
Since GyroidOS uses the system call directly and not libbpf, we missed
to handle this error correctly. Thus, this hint in the man page for the
bpf() system call should be helpful for others who implement on the
low-level interface, too.
Signed-off-by: Michael Weiß <michael.weiss@aisec.fraunhofer.de>
Cc: Alexei Starovoitov <ast@kernel.org>
[alx: wfix]
Signed-off-by: Alejandro Colomar <alx@kernel.org>
|
|
- Use the dummy character to avoid warnings in examples.
- Re-enable the warning.
Suggested-by: "G. Branden Robinson" <g.branden.robinson@gmail.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
|
|
- Add a new HISTORY section that covers the history of an API, both
regarding implementations and regarding old standards. This was
previously covered in VERSIONS, and in some cases in STANDARDS.
- Repurpose VERSIONS to cover differing implementations in _current_
systems.
- STANDARDS is reduced to only cover current versions of standards.
That basically means only C11 (C99 has been superseeded by C11; C17
is just a bugfix of C11, so not really a new version), and
POSIX.1-2008 (*-2001 was superseeded by *-2008; *-2017 was just a
bugfix for *-2008). The section also mentions for example 'Linux',
'GNU' or 'BSD' when a non-standard API is Linux- or GNU-only or if
it's (de-facto) standard in the BSDs.
- In some cases content that should go into one of these sections was
in NOTES. Move it from there to where it corresponds.
- In the SYNOPSIS, I added [[deprecated]] in some functions that I
found are deprecated by the relevant standards.
- A few other related changes...
Cc: Oskari Pirhonen <xxc3ncoredxx@gmail.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
|
|
Signed-off-by: Alejandro Colomar <alx@kernel.org>
|
|
Signed-off-by: Alejandro Colomar <alx@kernel.org>
|
|
Signed-off-by: Alejandro Colomar <alx@kernel.org>
|
|
This improves readability in the source code, since it delimits where
the escape sequence ends.
Cc: наб <nabijaczleweli@nabijaczleweli.xyz>
Cc: "G. Branden Robinson" <g.branden.robinson@gmail.com>
Cc: Brian Inglis <Brian.Inglis@Shaw.ca>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
|
|
Refer consistently to software versions. In most cases, it is done as
<software> <version>. In the case of Linux and glibc, use the project
name, instead of other terms such as 'kernel' or 'library'.
I found the uses of inconsistent language with the following:
$ find man* -type f \
| xargs grep -i '\(since\|before\|after\|until\|to\|from\|in\|between\|version\|with\) \(kernel\|version\|2\.\|3\.\|4\.\|5\.\)' \
| sort
However, I might have missed some cases. Anyway, 99% consistency is
pretty good consistency. We'll fix the remaining cases as we see them.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
|
|
Scripted change:
$ find man* -type f \
| xargs grep -L '\.so' \
| while read f; do
P=$(basename $f);
T=$(grep '\.TH ' $f | cut -f2,3 -d' ' | sed 's/ /./');
p=$(echo $P | tr '[:upper:]' '[:lower:]');
t=$(echo $T | tr '[:upper:]' '[:lower:]');
Tn=$(echo $T | sed 's/\.[^.]\+$//')
Pn=$(echo $P | sed 's/\.[^.]\+$//')
N=$(man_section $f NAME \
| sed -n '/NAME/,/ - /p' \
| sed 's/ - .*//' \
| grep -v '^NAME$' \
| tr ', ' '\n' \
| grep -i "^$Pn$" \
| head -n1)
test $P = $T \
&& test -n $N \
&& continue;
if test "x$p" != "x$t"; then
echo 1 $P $T $N;
elif test -z "$N"; then
echo 2 $P $T $N;
else
sed -i "/\.TH /s/$Tn/$N/" $f;
fi;
done;
On 10/30/22 23:00, G. Branden Robinson wrote:
> For those to whom this change is coming as an unpleasant surprise, the
> forthcoming groff 1.23.0 features an option that will reverse this
> change at rendering time.
>
> From groff_man(7):
>
> -rCT=1 Capitalize titles, setting the man page title (the first
> argument to .TH) in full capitals in headers and footers.
> This transformation is off by default because it discards
> case distinction information.
>
> This register can also be set in a site-local "man.local" file to force
> it on for all pages. On Debian-based systems, this file is in
> /etc/groff. The following line will do the trick.
>
> .nr CT 1
>
> The groff_man_style(7) man page offers further examples of such
> rendering customization.
>
> /usr/local/share/groff/site-tmac/man.local
> Put site‐local changes and customizations into this file.
>
> .\" Use narrower indentation on terminals and similar.
> .if n .nr IN 4n
> .\" Put only one space after the end of a sentence.
> .ss 12 0 \" See groff(7).
> .\" Keep pages narrow even on wide terminals.
> .if n .if \n[LL]>78n .nr LL 78n
> .\" Ensure hyperlinks are enabled for terminals.
> .nr U 1
>
> On multi‐user systems, it is more considerate to users whose
> preferences may differ from the administrator’s to be less
> aggressive with such settings, or to permit their override
> with a user‐specific man.local file. This can be achieved by
> placing one or both of following requests at the end of the
> site‐local file.
> .soquiet \V[XDG_CONFIG_HOME]/man.local
> .soquiet \V[HOME]/.man.local
> However, a security‐sandboxed man(1) program may lack
> permission to open such files.
Cc: Ingo Schwarze <schwarze@openbsd.org>
Cc: "G. Branden Robinson" <g.branden.robinson@gmail.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
|
|
There are different kinds of lists:
Tagged paragraphs
These are fixed in a separate commit (the previous one).
They are used for a list of tags and their descriptions.
An example is this commit message itself.
Ordered lists
Elements are preceeded by a number in parentheses.
These represent a set of steps that have an order.
When there are substeps, they will be numbered like (4.2).
Positional lists
Elements are preceeded by a number in square brackets
(index). These represent fields in a set. The index will
start at:
0 fields of a C data structure, to be consistent
with arrays.
1 fields of a file, to be consistent with tools like
cut(1).
Alternatives list
Elements are preceeded by a letter in parentheses.
These represent a set of (normally) exclusive
alternatives.
Bullet lists
Elements are preceeded by bullet symbols. Anything that
doesn't fit elsewhere usually is covered by this type of
list.
Notes
Not really a list, but the syntax is identical to
"positional lists".
There should always be 2 spaces between the list symbol and the
elements. This doesn't apply to "tagged paragraphs", which use
the default indentation rules.
Reported-by: Mike Frysinger <vapier@gentoo.org>
Cc: <groff@gnu.org>
Acked-by: Douglas McIlroy <douglas.mcilroy@dartmouth.edu>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
|
|
Reported-by: Mike Frysinger <vapier@gentoo.org>
Cc: <groff@gnu.org>
Acked-by: Douglas McIlroy <douglas.mcilroy@dartmouth.edu>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
|
|
Replace the date by a placeholder (date) in the repo, as we're
doing with the version (unreleased). It will be filled when the
tarball is generated with 'make dist' (or equivalent) with the
date of the most recent git commit that modifies the page (as was
done previously by update_timestamps.sh, which has been removed).
Scripted change (mostly):
$ find man* -type f \
| xargs sed -Ei '/^\.TH /s/.TH +([^ ]+ +[^ ]+) +[^ ]+ +(.*)/.TH \1 (date) \2/'
Signed-off-by: Alejandro Colomar <alx@kernel.org>
|
|
memusagestat.1, mtrace.1, pldd.1, sprof.1, time.1, _exit.2, _syscall.2, accept.2, access.2, acct.2, add_key.2, adjtimex.2, alarm.2, alloc_hugepages.2, arch_prctl.2, bdflush.2, bind.2, bpf.2, brk.2, cacheflush.2, capget.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, clone.2, close.2, close_range.2, connect.2, copy_file_range.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, execveat.2, exit_group.2, fallocate.2, fanotify_init.2, fanotify_mark.2, fcntl.2, flock.2, fork.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_mempolicy.2, get_robust_list.2, getcpu.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getrandom.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, init_module.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, intro.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl.2, ioctl_console.2, ioctl_fat.2, ioctl_ficlonerange.2, ioctl_fideduperange.2, ioctl_fslabel.2, ioctl_getfsmap.2, ioctl_iflags.2, ioctl_ns.2, ioctl_tty.2, ioctl_userfaultfd.2, ioperm.2, iopl.2, ioprio_set.2, ipc.2, kcmp.2, kexec_load.2, keyctl.2, kill.2, landlock_add_rule.2, landlock_create_ruleset.2, landlock_restrict_self.2, link.2, listen.2, listxattr.2, llseek.2, lookup_dcookie.2, lseek.2, madvise.2, mbind.2, membarrier.2, memfd_create.2, memfd_secret.2, migrate_pages.2, mincore.2, mkdir.2, mknod.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, mount_setattr.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open.2, open_by_handle_at.2, openat2.2, outb.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pidfd_getfd.2, pidfd_open.2, pidfd_send_signal.2, pipe.2, pivot_root.2, pkey_alloc.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_madvise.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readlink.2, readv.2, reboot.2, recv.2, recvmmsg.2, remap_file_pages.2, removexattr.2, rename.2, request_key.2, restart_syscall.2, rmdir.2, rt_sigqueueinfo.2, s390_guarded_storage.2, s390_pci_mmio_write.2, s390_runtime_instr.2, s390_sthyi.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setattr.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, seccomp.2, seccomp_unotify.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, sendmmsg.2, set_mempolicy.2, set_thread_area.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setns.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, sgetmask.2, shmctl.2, shmget.2, shmop.2, shutdown.2, sigaction.2, sigaltstack.2, signal.2, signalfd.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, splice.2, spu_create.2, spu_run.2, stat.2, statfs.2, statx.2, stime.2, subpage_prot.2, swapon.2, symlink.2, sync.2, sync_file_range.2, syscall.2, syscalls.2, sysctl.2, sysfs.2, sysinfo.2, syslog.2, tee.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unimplemented.2, unlink.2, unshare.2, uselib.2, userfaultfd.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, open_how.2type, CPU_SET.3, FILE.3, INFINITY.3, MAX.3, MB_CUR_MAX.3, MB_LEN_MAX.3, _Generic.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_init.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, backtrace.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, bswap.3, btowc.3, btree.3, byteorder.3, bzero.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catgets.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, cexp2.3, cfree.3, cimag.3, circleq.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, dbopen.3, des_crypt.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dladdr.3, dlerror.3, dlinfo.3, dlopen.3, dlsym.3, drand48.3, drand48_r.3, duplocale.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, fileno.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fopencookie.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getentropy.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getusershell.3, getutent.3, getutmp.3, getw.3, getwchar.3, glob.3, gnu_get_libc_version.3, grantpt.3, group_member.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_net_pton.3, inet_ntop.3, inet_pton.3, initgroups.3, insque.3, intro.3, isalpha.3, isatty.3, isfdtype.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, lio_listio.3, list.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc.3, malloc_get_state.3, malloc_hook.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, netlink.3, newlocale.3, nextafter.3, nextup.3, nl_langinfo.3, ntp_gettime.3, offsetof.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, pow.3, pow10.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_atfork.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setsigmask_np.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_mutex_consistent.3, pthread_mutexattr_getpshared.3, pthread_mutexattr_init.3, pthread_mutexattr_setrobust.3, pthread_rwlockattr_setkind_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_spin_init.3, pthread_spin_lock.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, readdir_r.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scanf.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setjmp.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sigwait.3, sin.3, sincos.3, sinh.3, sleep.3, slist.3, sockatmark.3, sqrt.3, stailq.3, statvfs.3, stdarg.3, stdin.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strfry.3, strftime.3, string.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tailq.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, undocumented.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, uselocale.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3, NULL.3const, sysexits.h.3head, aiocb.3type, blkcnt_t.3type, blksize_t.3type, cc_t.3type, clock_t.3type, clockid_t.3type, dev_t.3type, div_t.3type, double_t.3type, epoll_event.3type, fenv_t.3type, id_t.3type, intN_t.3type, intmax_t.3type, intptr_t.3type, iovec.3type, itimerspec.3type, lconv.3type, mode_t.3type, off_t.3type, ptrdiff_t.3type, regex_t.3type, size_t.3type, sockaddr.3type, stat.3type, time_t.3type, timer_t.3type, timespec.3type, timeval.3type, tm.3type, va_list.3type, void.3type, cciss.4, console_codes.4, cpuid.4, dsp56k.4, fd.4, full.4, fuse.4, hd.4, hpsa.4, initrd.4, intro.4, lirc.4, loop.4, lp.4, mem.4, mouse.4, msr.4, null.4, pts.4, ram.4, random.4, rtc.4, sd.4, sk98lin.4, smartpqi.4, st.4, tty.4, ttyS.4, vcs.4, veth.4, wavelan.4, acct.5, charmap.5, core.5, dir_colors.5, elf.5, filesystems.5, ftpusers.5, gai.conf.5, group.5, host.conf.5, hosts.5, hosts.equiv.5, intro.5, issue.5, locale.5, motd.5, networks.5, nologin.5, nscd.conf.5, nss.5, nsswitch.conf.5, passwd.5, proc.5, protocols.5, repertoiremap.5, resolv.conf.5, rpc.5, securetty.5, services.5, shells.5, slabinfo.5, sysfs.5, termcap.5, tmpfs.5, ttytype.5, tzfile.5, utmp.5, intro.6, address_families.7, aio.7, armscii-8.7, arp.7, ascii.7, attributes.7, boot.7, bootparam.7, bpf-helpers.7, capabilities.7, cgroup_namespaces.7, cgroups.7, charsets.7, complex.7, cp1251.7, cp1252.7, cpuset.7, credentials.7, ddp.7, environ.7, epoll.7, fanotify.7, feature_test_macros.7, fifo.7, futex.7, glob.7, hier.7, hostname.7, icmp.7, inode.7, inotify.7, intro.7, ip.7, ipc_namespaces.7, ipv6.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, kernel_lockdown.7, keyrings.7, koi8-r.7, koi8-u.7, landlock.7, libc.7, locale.7, mailaddr.7, man-pages.7, man.7, math_error.7, mount_namespaces.7, mq_overview.7, namespaces.7, netdevice.7, netlink.7, network_namespaces.7, nptl.7, numa.7, operator.7, packet.7, path_resolution.7, persistent-keyring.7, pid_namespaces.7, pipe.7, pkeys.7, posixoptions.7, process-keyring.7, pthreads.7, pty.7, queue.7, random.7, raw.7, regex.7, rtld-audit.7, rtnetlink.7, sched.7, sem_overview.7, session-keyring.7, shm_overview.7, sigevent.7, signal-safety.7, signal.7, sock_diag.7, socket.7, spufs.7, standards.7, suffixes.7, symlink.7, system_data_types.7, sysvipc.7, tcp.7, termio.7, thread-keyring.7, time.7, time_namespaces.7, udp.7, udplite.7, unicode.7, units.7, unix.7, uri.7, user-keyring.7, user-session-keyring.7, user_namespaces.7, utf-8.7, uts_namespaces.7, vdso.7, vsock.7, x25.7, xattr.7, iconvconfig.8, intro.8, ld.so.8, ldconfig.8, nscd.8, sln.8, tzselect.8: tstamp
Signed-off-by: Alejandro Colomar <alx@kernel.org>
|
|
This reverts commit 70ac1c4785fc1e158ab2349a962dba2526bf4fbc.
Link: <https://lore.kernel.org/linux-man/YxcV4h+Xn7cd6+q2@pevik/T/>
Reported-by: Petr Vorel <pvorel@suse.cz>
Reported-by: Jakub Wilk <jwilk@jwilk.net>
Cc: Stefan Puiu <stefan.puiu@gmail.com>
Signed-off-by: Alex Colomar <alx.manpages@gmail.com>
|
|
The root of the repository is becoming a bit overpopulated and
unorganized, due to the recent addition of more mandirs, and more
informative and configuration files too. Let's create a specific
mandir <man/> that contains the mandirs <man[1-8]*>.
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
|
|
This reverts commit 2294974b3a1341e457edb682c08c5f4b2d14675e.
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
|
|
Kernel __u64 and similar types are ABI-compatible, and mostly
API-compatible with ISO C types. User-space programmers don't
care about kernel details, and should only use libc types.
Document syscalls and structures provided by the Linux kernel as
if they used libc types.
There's work in the kernel to remove this small API
incompatibility, which is only for pointers or printf specifiers.
Since I couldn't find any structure that uses pointers, there
shouldn't be any issues here. Also, the only pointer I found was
in a syscall parameter, but since syscall(2) doesn't check its
arguments' types, we're also safe there.
This patch doesn't go without controversy. Check the discussions
in the links below.
Found with:
$ grep -rn '\b_*[su][8136][624]*\b' man* \
| grep -v -e /bpf-helpers.7 -e /proc.5 -e /epoll_event.3type -e /wcscmp.3 \
-e /crypt.3 -e /mempcpy.3 -e /memcmp.3 -e /string.3 -e /wcsncmp.3 \
-e /wcscasecmp.3 -e /wmemcmp.3 -e /strcasecmp.3 -e /bcmp.3 \
-e /bstring.3 -e /endian.3 -e /strverscmp.3 -e /wcsncasecmp.3 \
-e /strcoll.3 -e /strcmp.3 \
| tee /dev/tty \
| wc -l;
Link: <https://lore.kernel.org/linux-man/20210423230609.13519-1-alx.manpages@gmail.com/T/>
Link: <https://lore.kernel.org/lkml/YZvIlz7J6vOEY+Xu@yuki/T/>
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
Nacked-by: Alexei Starovoitov <ast@kernel.org>
Nacked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nacked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Zack Weinberg <zackw@panix.com>
Cc: LKML <linux-kernel@vger.kernel.org>
Cc: glibc <libc-alpha@sourceware.org>
Cc: GCC <gcc-patches@gcc.gnu.org>
Cc: bpf <bpf@vger.kernel.org>
Cc: LTP List <ltp@lists.linux.it>
Cc: Linux API <linux-api@vger.kernel.org>
Cc: linux-arch <linux-arch@vger.kernel.org>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Joseph Myers <joseph@codesourcery.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Cyril Hrubis <chrubis@suse.cz>
Cc: David Howells <dhowells@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Now that we have the LIBRARY section, and a 4th argument that
already tells that it's a page from the Linux man-pages project,
the 5th argument isn't telling any information that the default
value wouldn't. So let's just remove it.
Scripted change:
$ find man* -type f \
| xargs sed -Ei '/^.TH /s/(.TH +[^ ]+ +[^ ]+ +[^ ]+ +"[^"]+") .*/\1/'
Acked-by: "G. Branden Robinson" <g.branden.robinson@gmail.com>
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
Cc: Ingo Schwarze <schwarze@openbsd.de>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
On 8/20/22 13:57, Alejandro Colomar wrote:
> On 8/20/22 07:43, G. Branden Robinson wrote:
>>
>> In my opinion it would benefit readers of the Linux man-pages if the
>> fourth argument to `TH` were what it is in many other man pages: an
>> identifier for the name and version number of the release originating
>> them. In every page it would be clear what version of the man-pages was
>> being viewed. Little sophistication would be demanded of the user to
>> check the Web to determine the relative age of the pages, independently
>> of the modification date of the particular page. Such usage would be
>> congruent with the argument's purpose in AT&T and BSD Unix, where this
>> datum was "7th Edition", "System III", or "4.2 Berkeley Distribution",
>> or similar.
>
> I thought about it in the past... That field was the only thing that
> said where a function came from. If we removed GNU (or something else),
> how would someone know where does the function or whatever comes from??
>
> I guess that's also why the colophon was appended to the pages by
> Michael. Since we couldn't use the 4th field for that, we had to have a
> COLOPHON section.
>
> However, the addition of the LIBRARY section seems to fix this issue,
> and so now we have an even more precise way to determine where a given
> function comes from (including the library file name, and the linker
> option).
>
> This gives me another argument for those who don't like to have a
> LIBRARY section for libc stuff (since -lc is unnecessary), and consider
> it noise.
>
>>
>> Further, as the libc-related man pages in this project expand coverage
>> to other libcs than GNU's, the alternatives to the empty string
>> proferred in man-pages(7) seem less and less appropriate.
>
> Agree. LIBRARY seems much more appropriate for that purpose.
>
> And this helps remove the COLOPHON section (or at least, we don't need
> to autogenerate it, since the version number now comes in .TH, and the
> COLOPHON is static; so I can even move it to a smaller REPORTING BUGS
> section).
Scripted change:
$ find man* -type f \
|xargs sed -Ei '/^.TH /s/(.TH +[^ ]+ +[^ ]+ +[^ ]+) +"[^"]*"/\1 "Linux man-pages (unreleased)"/'
$ find man* -type f \
|xargs sed -Ei '/^.TH /s/(.TH +[^ ]+ +[^ ]+ +[^ ]+) +[^" ]+/\1 "Linux man-pages (unreleased)"/'
$ git restore man5/tzfile.5
$ git restore man8/zdump.8
$ git restore man8/zic.8
$ git restore man7/bpf-helpers.7
Link: <https://lore.kernel.org/linux-man/20220819180323.dbsgxh5qvcjabjm6@jwilk.net/T/#u>
Reported-by: Jakub Wilk <jwilk@jwilk.net>
Reported-by: "G. Branden Robinson" <g.branden.robinson@gmail.com>
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
Cc: Ingo Schwarze <schwarze@openbsd.de>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
STANDARDS seems to be much more extended than CONFORMING TO. For
consistency across the whole manual pages corpus, let's try to
unify, by following the most commonly used section name.
On 7/27/22 12:49, Ingo Schwarze wrote:
> Alejandro Colomar wrote on Tue, Jul 26, 2022 at 02:02:56PM +0200:
> > We use CONFORMING TO in Linux. Don't know why; just history, I guess.
> > See man-pages(7).
>
> Weird.
>
> I failed to find a single instance of "CONFORMING TO" in AT&T UNIX
> (including v6, PWB, v7, 32v, v8, v10, System III, SVR1, SVR2) nor in
> any version of UCB CSRG BSD. So considering that System V and BSD are
> widely considered the two main original branches of the development
> of Unix-like operating systems and Linux is often considered to have
> drawn inspiration from both, the section name "CONFORMING TO" does
> not appear to be a UNIX thing. For example, Aeleen Frisch, "Essential
> System Administration", O'Reilly, Cambridge 1995, considers Linux
> as slightly more influenced by 4.3BSD than by System V Release 3.
>
> STANDARDS, on the other hand, is present since 4.3BSD-Reno (June 1990).
>
> 4.3BSD-Reno predates the first version of the Linux kernel by more than
> a year, and the first Linux manual pages probably for longer than that.
>
> So i have no idea where "CONFORMING TO" may have come from.
Scripted change:
$ find man* -type f | xargs sed -i 's/CONFORMING TO/STANDARDS/'
plus a few manual fixes to the following files:
- man2/getrlimit.2
- man3/syslog.3
- scripts/bash_aliases
Reported-by: Ingo Schwarze <schwarze@openbsd.org>
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
|
|
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
|
|
In a discussion regarding a potential backward incompatible change [1],
Andrii Nakryiko points out that unused bytes of bpf_attr should be
zero. Add this bit of information to the bpf(2) man page.
[1] https://lore.kernel.org/bpf/CAEf4BzbT4vQBnZzdD00SuPCDkeb4Cm=F6PLUoO_3X93UQD5hbQ@mail.gmail.com/
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
|
|
Plus some other found in the process.
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
|
|
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
|
|
chown.2, close_range.2, copy_file_range.2, execve.2, execveat.2, fanotify_mark.2, futex.2, futimesat.2, getpriority.2, intro.2, ioctl_tty.2, keyctl.2, link.2, membarrier.2, mkdir.2, mknod.2, mlock.2, mount.2, mount_setattr.2, open.2, open_by_handle_at.2, perf_event_open.2, pidfd_open.2, readlink.2, readv.2, rename.2, request_key.2, seccomp.2, sigaction.2, stat.2, statx.2, symlink.2, syscalls.2, umount.2, unlink.2, utimensat.2, wait.2, bsearch.3, fflush.3, getaddrinfo.3, getauxval.3, getopt.3, getsubopt.3, mkfifo.3, pthread_mutex_consistent.3, pthread_setname_np.3, pthread_tryjoin_np.3, scandir.3, sem_wait.3, stailq.3, strlen.3, strstr.3, termios.3, tsearch.3, wcslen.3, wcstok.3, wordexp.3, proc.5, capabilities.7, cgroups.7, fanotify.7, mount_namespaces.7, namespaces.7, path_resolution.7, pipe.7, posixoptions.7, user_namespaces.7, vdso.7, iconvconfig.8, ld.so.8: tstamp
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Scripted change:
$ find man? -type f \
| sed -i 's/int argc, char \*\*argv/int argc, char \*argv\[\]/';
Signed-off-by: Thomas Voss <thomasavoss@protonmail.com>
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
mtrace.1, _exit.2, _syscall.2, accept.2, access.2, acct.2, add_key.2, adjtimex.2, alloc_hugepages.2, arch_prctl.2, bdflush.2, bind.2, bpf.2, brk.2, cacheflush.2, capget.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, clone.2, close.2, close_range.2, connect.2, copy_file_range.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, execveat.2, fanotify_init.2, fanotify_mark.2, fcntl.2, flock.2, fork.2, fsync.2, futex.2, get_kernel_syms.2, get_mempolicy.2, get_robust_list.2, getcpu.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getrandom.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, init_module.2, inotify_add_watch.2, inotify_rm_watch.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl.2, ioctl_console.2, ioctl_fat.2, ioctl_ficlonerange.2, ioctl_fideduperange.2, ioctl_fslabel.2, ioctl_getfsmap.2, ioctl_ns.2, ioctl_tty.2, ioctl_userfaultfd.2, ioperm.2, iopl.2, ipc.2, kcmp.2, kexec_load.2, keyctl.2, kill.2, link.2, listen.2, listxattr.2, llseek.2, lookup_dcookie.2, lseek.2, madvise.2, mbind.2, membarrier.2, memfd_create.2, migrate_pages.2, mincore.2, mkdir.2, mknod.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open.2, open_by_handle_at.2, openat2.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pidfd_getfd.2, pidfd_open.2, pidfd_send_signal.2, pipe.2, pivot_root.2, pkey_alloc.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readlink.2, readv.2, reboot.2, recv.2, remap_file_pages.2, removexattr.2, rename.2, request_key.2, restart_syscall.2, rmdir.2, rt_sigqueueinfo.2, s390_guarded_storage.2, s390_pci_mmio_write.2, s390_runtime_instr.2, s390_sthyi.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setattr.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, seccomp.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, set_thread_area.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, sgetmask.2, shmctl.2, shmget.2, shmop.2, shutdown.2, sigaction.2, sigaltstack.2, signal.2, signalfd.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, splice.2, spu_create.2, spu_run.2, stat.2, statfs.2, statx.2, stime.2, subpage_prot.2, swapon.2, symlink.2, sync.2, sync_file_range.2, syscall.2, syscalls.2, sysctl.2, sysfs.2, sysinfo.2, syslog.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unimplemented.2, unlink.2, unshare.2, uselib.2, userfaultfd.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, backtrace.3, basename.3, bcmp.3, bcopy.3, bindresvport.3, bsd_signal.3, bsearch.3, bstring.3, btowc.3, byteorder.3, bzero.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catgets.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, cexp2.3, cfree.3, cimag.3, circleq.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, des_crypt.3, difftime.3, dirfd.3, div.3, dl_iterate_phdr.3, dladdr.3, dlerror.3, dlinfo.3, dlopen.3, dlsym.3, drand48.3, drand48_r.3, duplocale.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, fileno.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fopencookie.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getentropy.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getumask.3, getusershell.3, getutent.3, getutmp.3, getw.3, getwchar.3, glob.3, gnu_get_libc_version.3, grantpt.3, group_member.3, gsignal.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_net_pton.3, inet_ntop.3, inet_pton.3, initgroups.3, insque.3, isalpha.3, isatty.3, isfdtype.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, lio_listio.3, list.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc.3, malloc_get_state.3, malloc_hook.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, newlocale.3, nextafter.3, nextup.3, nl_langinfo.3, ntp_gettime.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, pow.3, pow10.3, printf.3, profil.3, psignal.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setsigmask_np.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_mutex_consistent.3, pthread_mutexattr_getpshared.3, pthread_mutexattr_setrobust.3, pthread_rwlockattr_setkind_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_spin_init.3, pthread_spin_lock.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, readdir_r.3, realpath.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scanf.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setjmp.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigsetops.3, sigvec.3, sigwait.3, sin.3, sincos.3, sinh.3, sleep.3, slist.3, sockatmark.3, sqrt.3, stailq.3, statvfs.3, stdarg.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strfry.3, strftime.3, string.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tailq.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, undocumented.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, uselocale.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3, cciss.4, console_codes.4, dsp56k.4, hpsa.4, initrd.4, loop.4, lp.4, msr.4, random.4, rtc.4, smartpqi.4, veth.4, wavelan.4, acct.5, core.5, elf.5, hosts.5, locale.5, proc.5, resolv.conf.5, rpc.5, slabinfo.5, sysfs.5, tmpfs.5, utmp.5, address_families.7, aio.7, attributes.7, bootparam.7, capabilities.7, cgroups.7, complex.7, ddp.7, environ.7, epoll.7, fanotify.7, feature_test_macros.7, hier.7, inode.7, inotify.7, ip.7, ipv6.7, keyrings.7, locale.7, man-pages.7, man.7, math_error.7, mount_namespaces.7, namespaces.7, netdevice.7, netlink.7, numa.7, packet.7, pkeys.7, pthreads.7, queue.7, raw.7, rtnetlink.7, sched.7, session-keyring.7, shm_overview.7, sigevent.7, signal-safety.7, signal.7, sock_diag.7, socket.7, spufs.7, symlink.7, system_data_types.7, tcp.7, time_namespaces.7, udp.7, udplite.7, unicode.7, unix.7, uri.7, user_namespaces.7, vdso.7, vsock.7, x25.7, iconvconfig.8, ld.so.8, ldconfig.8, sln.8, tzselect.8: tstamp
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
appropriate
Use \- for math formulas, pathnames, manual page cross references,
etc.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
A real minus can be cut and pasted...
THere are a few exceptions that gave been excluded in the this
change. For example, where there' is a string such as "<p1-name>",
where p1-name is soome sort of pseudo-identifier.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
In the RETURN VALUE sections, a number of different wordings
are used in to describe the fact that 'errno' is set on error.
There's no reason for the difference in wordings, since the same
thing is being described in each case. Switch to a standard
wording that is the same as FreeBSD and similar to the wording
used in POSIX.1.
In this change, fix some instances stating that 'errno' is set
"appropriately" to instead say "to indicate the error".
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
appropriate
Rationale:
$ man 7 man-pages 2>/dev/null | sed -n /Paragraphs/,/^$/p
Paragraphs should be separated by suitable markers (usually
either .PP or .IP). Do not separate paragraphs using blank
lines, as this results in poor rendering in some output
formats (such as PostScript and PDF).
Fix:
$ sed -i -e '1,/^\.EX/s/^$/.PP/' -e '/^\.EE/,/^\.EX/s/^$/.PP/' man?/*
And then some manual adjustments.
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
As per section ordering rules given in man-pages(7).
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
epoll_ctl.2, eventfd.2, fanotify_init.2, fanotify_mark.2, futex.2, getdents.2, getpid.2, getrlimit.2, intro.2, ioctl_fat.2, ioctl_ns.2, kcmp.2, keyctl.2, membarrier.2, memfd_create.2, mprotect.2, msgctl.2, msgop.2, nfsservctl.2, open.2, open_by_handle_at.2, openat2.2, outb.2, perf_event_open.2, pivot_root.2, recv.2, recvmmsg.2, request_key.2, sched_setaffinity.2, sched_setattr.2, seccomp.2, select.2, send.2, signalfd.2, spu_run.2, sysctl.2, timer_create.2, userfaultfd.2, wait.2, CPU_SET.3, abs.3, argz_add.3, backtrace.3, bsearch.3, bswap.3, clock_getcpuclockid.3, cmsg.3, dl_iterate_phdr.3, dlinfo.3, dlopen.3, drand48.3, drand48_r.3, duplocale.3, encrypt.3, endian.3, envz_add.3, errno.3, ffs.3, fopencookie.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getgrent_r.3, getgrouplist.3, getifaddrs.3, getline.3, getprotoent_r.3, getpwent_r.3, getpwnam.3, getservent_r.3, hsearch.3, insque.3, intro.3, lrint.3, lround.3, lseek64.3, mallinfo.3, malloc_hook.3, malloc_info.3, mbsinit.3, mbstowcs.3, mtrace.3, newlocale.3, ntp_gettime.3, offsetof.3, perror.3, posix_fallocate.3, posix_spawn.3, printf.3, psignal.3, pthread_attr_init.3, pthread_create.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_setaffinity_np.3, pthread_setname_np.3, pthread_sigmask.3, qsort.3, rand.3, random.3, rpc.3, rtnetlink.3, scalbln.3, shm_open.3, stdarg.3, strcat.3, strerror.3, strfmon.3, strptime.3, strsignal.3, strtod.3, strtok.3, strtol.3, strtoul.3, tsearch.3, wordexp.3, loop.4, vcs.4, veth.4, core.5, locale.5, slabinfo.5, cgroup_namespaces.7, cpuset.7, credentials.7, fanotify.7, feature_test_macros.7, inotify.7, ip.7, kernel_lockdown.7, man.7, mount_namespaces.7, namespaces.7, pid_namespaces.7, rtld-audit.7, sigevent.7, sock_diag.7, standards.7, unix.7, user_namespaces.7: tstamp
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
open_by_handle_at.2, perf_event_open.2, pivot_root.2, request_key.2, sched_setaffinity.2, seccomp.2, select.2, statx.2, dl_iterate_phdr.3, dlinfo.3, dlopen.3, insque.3, newlocale.3, printf.3, pthread_setname_np.3, rpc.3, stdarg.3, strfmon.3, veth.4, proc.5, slabinfo.5, cgroup_namespaces.7, cgroups.7, cpuset.7, fanotify.7, inotify.7, mount_namespaces.7, sock_diag.7, user_namespaces.7, ld.so.8: Use \(aq instead of ' inside monospace fonts
Use \(aq to get an unslanted single quote inside monospace code
blocks. Using a simple ' results in a slanted quote inside PDFs.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
signalfd.2, timerfd_create.2, __ppc_get_timebase.3, a64l.3, frexp.3, pthread_setname_np.3, regex.3, rpmatch.3, scanf.3, strfmon.3, strftime.3, termios.3, console_codes.4, vcs.4, veth.4, core.5, dir_colors.5, termcap.5, ascii.7, charsets.7, glob.7, man-pages.7, operator.7, regex.7, user_namespaces.7, zic.8: Use "\(ha" rather than "^" in code
This renders better in PDF.
Reported-by: Geoff Clare <gwc@opengroup.org>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
keyctl.2, request_key.2, sigaction.2, signal.2, socket.2, dlopen.3, getauxval.3, gnu_get_libc_version.3, pthread_atfork.3, sem_post.3, setjmp.3, strftime.3, veth.4, locale.5, nscd.conf.5, resolv.conf.5, address_families.7, armscii-8.7, ascii.7, capabilities.7, cgroups.7, charsets.7, cp1251.7, cp1252.7, iso_8859-1.7, iso_8859-10.7, iso_8859-11.7, iso_8859-13.7, iso_8859-14.7, iso_8859-15.7, iso_8859-16.7, iso_8859-2.7, iso_8859-3.7, iso_8859-4.7, iso_8859-5.7, iso_8859-6.7, iso_8859-7.7, iso_8859-8.7, iso_8859-9.7, keyrings.7, koi8-r.7, koi8-u.7, libc.7, locale.7, man.7, network_namespaces.7, persistent-keyring.7, session-keyring.7, signal.7, unicode.7, uri.7, user-keyring.7, user-session-keyring.7: ffix: replace - with real\-
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
add_key.2, adjtimex.2, bind.2, bpf.2, chown.2, clone.2, close.2, copy_file_range.2, eventfd.2, fanotify_init.2, fanotify_mark.2, fork.2, fsync.2, futex.2, getdents.2, getrlimit.2, getxattr.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, ioctl_fat.2, ioctl_getfsmap.2, ioctl_ns.2, ioctl_tty.2, ioctl_userfaultfd.2, kcmp.2, keyctl.2, listen.2, listxattr.2, mbind.2, membarrier.2, memfd_create.2, mkdir.2, move_pages.2, mremap.2, msync.2, nfsservctl.2, open.2, perf_event_open.2, pidfd_send_signal.2, pipe.2, pivot_root.2, pkey_alloc.2, process_vm_readv.2, ptrace.2, readlink.2, readv.2, recv.2, recvmmsg.2, rename.2, request_key.2, s390_runtime_instr.2, sched_setaffinity.2, seccomp.2, send.2, sendmmsg.2, sigaltstack.2, signalfd.2, socket.2, socketpair.2, splice.2, spu_create.2, spu_run.2, statfs.2, syscall.2, sysctl.2, sysfs.2, tee.2, timer_getoverrun.2, timer_settime.2, umount.2, userfaultfd.2, utimensat.2, wait4.2, INFINITY.3, __ppc_get_timebase.3, __setfpucw.3, abort.3, aio_cancel.3, aio_error.3, aio_read.3, aio_return.3, atexit.3, backtrace.3, basename.3, bsearch.3, bswap.3, cacos.3, cacosh.3, catan.3, catanh.3, cexp2.3, clock_getcpuclockid.3, clog2.3, cmsg.3, confstr.3, div.3, dl_iterate_phdr.3, dlerror.3, dlinfo.3, dlopen.3, dlsym.3, duplocale.3, encrypt.3, end.3, endian.3, envz_add.3, err.3, expm1.3, fdim.3, flockfile.3, fmtmsg.3, frexp.3, ftw.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo_a.3, getauxval.3, getdate.3, getdtablesize.3, getgrent_r.3, getgrouplist.3, gethostbyname.3, getline.3, getnameinfo.3, getopt.3, getprotoent_r.3, getpwent_r.3, getpwnam.3, getservent_r.3, getsubopt.3, getutent.3, glob.3, gnu_get_libc_version.3, hsearch.3, if_nameindex.3, inet.3, inet_net_pton.3, inet_ntop.3, inet_pton.3, insque.3, killpg.3, makecontext.3, mallinfo.3, malloc.3, malloc_hook.3, malloc_info.3, mallopt.3, matherr.3, mbsnrtowcs.3, mbstowcs.3, mcheck.3, mempcpy.3, mq_getattr.3, mq_notify.3, mtrace.3, newlocale.3, nextafter.3, ntp_gettime.3, offsetof.3, open_memstream.3, pow.3, printf.3, pthread_attr_init.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setstack.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_detach.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_mutex_consistent.3, pthread_mutexattr_setrobust.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_spin_init.3, pthread_testcancel.3, pthread_tryjoin_np.3, ptsname.3, qsort.3, rand.3, random.3, remainder.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, sem_getvalue.3, sem_wait.3, setaliasent.3, setlogmask.3, sigwait.3, sincos.3, sockatmark.3, stdarg.3, stpcpy.3, strcat.3, strfmon.3, strptime.3, strtod.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, tsearch.3, uselocale.3, wcstok.3, wcstombs.3, wordexp.3, y0.3, loop.4, vcs.4, veth.4, charmap.5, core.5, filesystems.5, gai.conf.5, hosts.5, hosts.equiv.5, locale.5, nss.5, repertoiremap.5, securetty.5, shells.5, ttytype.5, ascii.7, complex.7, cpuset.7, credentials.7, fanotify.7, hier.7, inotify.7, ip.7, mount_namespaces.7, mq_overview.7, netlink.7, network_namespaces.7, pid_namespaces.7, pkeys.7, rtld-audit.7, rtnetlink.7, sem_overview.7, signal-safety.7, sock_diag.7, spufs.7, standards.7, symlink.7, tcp.7, time_namespaces.7, unix.7, user_namespaces.7, xattr.7, ldconfig.8: tstamp
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Taken from Linux v5.3-rc2. Add a reference to the header file to
save the future reader some time figuring out whether more entries
exist.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
BPF_PROG_TYPE_SOCKET_FILTER programs
In Linux 4.4, the allowed BPF helper functions that could
be called was governed by a check in sk_filter_func_proto().
Nowadays (Linux 5.6), it is I think governed by the check in
sk_filter_func_proto().
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
This notes that the kernel now allows calls to bpf() without CAP_SYS_ADMIN
under some circumstances.
Signed-off-by: Richard Palethorpe <rpalethorpe@suse.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
ipc.2, mount.2, mprotect.2, msgctl.2, msgget.2, msgop.2, pivot_root.2, pkey_alloc.2, poll.2, prctl.2, semctl.2, semget.2, semop.2, setxattr.2, shmctl.2, shmget.2, shmop.2, tkill.2, dlopen.3, exec.3, ftok.3, getutent.3, on_exit.3, strcat.3, cpuid.4, proc.5, capabilities.7, cgroup_namespaces.7, credentials.7, fanotify.7, mount_namespaces.7, namespaces.7, sched.7, signal.7, socket.7, unix.7, user_namespaces.7, vdso.7, xattr.7, ld.so.8: tstamp
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
pldd.1, sprof.1, time.1, _syscall.2, accept.2, add_key.2, adjtimex.2, bind.2, bpf.2, capget.2, chown.2, chroot.2, clock_getres.2, clone.2, connect.2, copy_file_range.2, epoll_ctl.2, epoll_wait.2, eventfd.2, fanotify_init.2, fanotify_mark.2, fcntl.2, fsync.2, futex.2, getcpu.2, getdents.2, getgid.2, getgroups.2, getpid.2, gettid.2, gettimeofday.2, getuid.2, getxattr.2, inotify_add_watch.2, inotify_init.2, ioctl_fat.2, ioctl_ns.2, ioctl_userfaultfd.2, ioprio_set.2, kcmp.2, kexec_load.2, keyctl.2, listxattr.2, lseek.2, madvise.2, memfd_create.2, migrate_pages.2, mount.2, mprotect.2, mremap.2, msgctl.2, msgop.2, nfsservctl.2, open_by_handle_at.2, perf_event_open.2, pipe.2, pivot_root.2, pkey_alloc.2, poll.2, posix_fadvise.2, prctl.2, readahead.2, readdir.2, readlink.2, reboot.2, recvmmsg.2, removexattr.2, rename.2, request_key.2, s390_guarded_storage.2, s390_runtime_instr.2, s390_sthyi.2, sched_setaffinity.2, sched_setattr.2, sched_setparam.2, seccomp.2, select.2, select_tut.2, semctl.2, sendmmsg.2, set_thread_area.2, setgid.2, setns.2, setuid.2, setxattr.2, shmctl.2, sigaction.2, signalfd.2, sigsuspend.2, socket.2, socketpair.2, spu_run.2, stat.2, statx.2, subpage_prot.2, syscalls.2, sysctl.2, tee.2, timer_create.2, timerfd_create.2, truncate.2, uname.2, unshare.2, userfaultfd.2, ustat.2, vmsplice.2, write.2, CPU_SET.3, __ppc_get_timebase.3, alloca.3, argz_add.3, asprintf.3, backtrace.3, basename.3, bsd_signal.3, bstring.3, bswap.3, bzero.3, cacos.3, cacosh.3, catan.3, catanh.3, catgets.3, clock_getcpuclockid.3, cmsg.3, confstr.3, ctermid.3, ctime.3, des_crypt.3, dl_iterate_phdr.3, dlinfo.3, dlsym.3, duplocale.3, end.3, endian.3, errno.3, exec.3, exit.3, ferror.3, fgetws.3, fmemopen.3, fnmatch.3, fopencookie.3, fputws.3, frexp.3, ftw.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getgrouplist.3, getifaddrs.3, getline.3, getlogin.3, getmntent.3, getnameinfo.3, getopt.3, getpass.3, getprotoent_r.3, getpwnam.3, getservent_r.3, getsubopt.3, glob.3, gnu_get_libc_version.3, hsearch.3, if_nameindex.3, index.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, isatty.3, iswblank.3, iswspace.3, lockf.3, makecontext.3, mallinfo.3, malloc.3, malloc_hook.3, malloc_info.3, mallopt.3, matherr.3, mbrtowc.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memchr.3, mq_getattr.3, mq_notify.3, newlocale.3, nl_langinfo.3, offsetof.3, perror.3, posix_spawn.3, printf.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_mutexattr_setrobust.3, pthread_rwlockattr_setkind_np.3, pthread_setaffinity_np.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, putenv.3, qsort.3, rand.3, random.3, readdir.3, regex.3, resolver.3, rpmatch.3, rtime.3, scanf.3, sem_wait.3, setaliasent.3, setbuf.3, stpcpy.3, stpncpy.3, strcat.3, strchr.3, strcmp.3, strcpy.3, strdup.3, strerror.3, strfromd.3, strfry.3, strftime.3, string.3, strlen.3, strnlen.3, strsep.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, system.3, termios.3, trunc.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscat.3, wcscpy.3, wcslen.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcsrtombs.3, wcsstr.3, wcstok.3, wcstombs.3, wcwidth.3, wprintf.3, xcrypt.3, console_codes.4, dsp56k.4, full.4, initrd.4, lirc.4, loop.4, st.4, tty.4, vcs.4, charmap.5, core.5, host.conf.5, locale.5, proc.5, repertoiremap.5, resolv.conf.5, termcap.5, tmpfs.5, tzfile.5, aio.7, capabilities.7, cgroup_namespaces.7, cgroups.7, charsets.7, complex.7, epoll.7, fanotify.7, feature_test_macros.7, inotify.7, ip.7, locale.7, man-pages.7, man.7, namespaces.7, pid_namespaces.7, pkeys.7, pthreads.7, rtld-audit.7, sched.7, signal.7, sock_diag.7, socket.7, tcp.7, udp.7, unicode.7, user_namespaces.7, utf-8.7, zdump.8, zic.8: tstamp
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
clone.2, copy_file_range.2, eventfd.2, execve.2, futex.2, getdents.2, getrlimit.2, ioctl_fat.2, ioctl_ns.2, kcmp.2, kexec_load.2, keyctl.2, listxattr.2, lseek.2, membarrier.2, memfd_create.2, mmap.2, mprotect.2, msgop.2, open_by_handle_at.2, perf_event_open.2, pipe.2, readdir.2, readlink.2, readv.2, recvmmsg.2, request_key.2, sched_setaffinity.2, seccomp.2, select.2, select_tut.2, sendmmsg.2, setns.2, signalfd.2, spu_run.2, stat.2, sysctl.2, tee.2, timer_create.2, timerfd_create.2, truncate.2, uname.2, unshare.2, userfaultfd.2, ustat.2, wait.2, CPU_SET.3, __ppc_get_timebase.3, argz_add.3, asprintf.3, backtrace.3, basename.3, bswap.3, bzero.3, cacos.3, cacosh.3, catan.3, catanh.3, catgets.3, clock_getcpuclockid.3, confstr.3, ctime.3, dl_iterate_phdr.3, dlinfo.3, duplocale.3, encrypt.3, end.3, endian.3, fgetws.3, fmemopen.3, fopencookie.3, fputws.3, frexp.3, ftw.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getdate.3, getgrouplist.3, getifaddrs.3, getline.3, getlogin.3, getopt.3, getpass.3, getprotoent_r.3, getpwnam.3, getservent_r.3, getsubopt.3, glob.3, gnu_get_libc_version.3, hsearch.3, if_nameindex.3, index.3, inet.3, inet_net_pton.3, inet_pton.3, insque.3, iswblank.3, iswspace.3, makecontext.3, mallinfo.3, malloc_hook.3, malloc_info.3, mallopt.3, matherr.3, mbrtowc.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memchr.3, mq_getattr.3, mq_notify.3, newlocale.3, nl_langinfo.3, offsetof.3, perror.3, posix_spawn.3, printf.3, pthread_attr_init.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_mutexattr_setrobust.3, pthread_setaffinity_np.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, qsort.3, rand.3, readdir.3, regex.3, rpmatch.3, rtime.3, scanf.3, sem_wait.3, setaliasent.3, setbuf.3, stpcpy.3, stpncpy.3, strcat.3, strchr.3, strcpy.3, strdup.3, strerror.3, strfromd.3, strftime.3, strlen.3, strnlen.3, strsep.3, strstr.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, termios.3, tsearch.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscat.3, wcscpy.3, wcslen.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcsrtombs.3, wcsstr.3, wcstok.3, wcstombs.3, wcwidth.3, wprintf.3, console_codes.4, dsp56k.4, full.4, initrd.4, loop.4, vcs.4, charmap.5, core.5, elf.5, locale.5, proc.5, repertoiremap.5, sysfs.5, termcap.5, aio.7, bpf-helpers.7, cgroups.7, charsets.7, complex.7, fanotify.7, feature_test_macros.7, inotify.7, locale.7, man-pages.7, man.7, pkeys.7, pthreads.7, rtld-audit.7, sock_diag.7, unix.7, user_namespaces.7, utf-8.7: Use '\e' rather than '\\' to get a backslash
Quoting Branden:
*roff escape sequences may sometimes look like C escapes, but that
is misleading. *roff is in part a macro language and that means
recursive expansion to arbitrary depths.
You can get away with "\\" in a context where no macro expansion
is taking place, but try to spell a literal backslash this way in
the argument to a macro and you will likely be unhappy with
results.
Try viewing the attached file with "man -l".
"\e" is the preferred and portable way to get a portable "escape
literal" going back to CSTR #54, the original Bell Labs troff
paper.
groff(7) discusses the issue:
\\ reduces to a single backslash; useful to delay its
interpretation as escape character in copy mode. For a
printable backslash, use \e, or even better \[rs], to be
independent from the current escape character.
As of groff 1.22.4, groff_man(7) does as well:
\e Widely used in man pages to represent a backslash output
glyph. It works reliably as long as the .ec request is
not used, which should never happen in man pages, and it
is slightly more portable than the more exact ‘\(rs’
(“reverse solidus”) escape sequence.
People not concerned with portability to extremely old troffs should
probably just use \(rs (or \[rs]), as it means "the backslash
glyph", not "the glyph corresponding to whatever the current escape
character is".
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
1) Use single-font macros for a single argument.
2) Use quotation marks for arguments containing a space.
3) Use roman font for punctuation marks.
The output has only changes of the font for a punctuation mark.
Signed-off-by: Bjarni Ingi Gislason <bjarniig@rhi.hi.is>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
mtk: checked also against examples in samples/bpf
in kernel source to confirm.
Signed-off-by: Oded Elisha <oded123456@gmail.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Reported-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
JIT support for x86-32 was during the Linux 4.18 release cycle.
Also correct the entry for MIPS (only MIPS64 is supported).
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
feature_test_macros.7, sched.7: spfix
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
And note kernel version numbers where support is added.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
This causes the JIT compiler to be always on and
forces bpf_jit_enable to 1.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
mount.2, mprotect.2, perf_event_open.2, pkey_alloc.2, prctl.2, read.2, recvmmsg.2, s390_sthyi.2, seccomp.2, sendmmsg.2, syscalls.2, unshare.2, write.2, errno.3, fgetpwent.3, fts.3, pthread_rwlockattr_setkind_np.3, fuse.4, veth.4, capabilities.7, cgroups.7, ip.7, man-pages.7, namespaces.7, network_namespaces.7, sched.7, socket.7, user_namespaces.7, iconvconfig.8: tstamp
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
pldd.1, sprof.1, time.1, _syscall.2, add_key.2, alloc_hugepages.2, arch_prctl.2, bpf.2, cacheflush.2, capget.2, chdir.2, chmod.2, chown.2, chroot.2, clock_getres.2, clock_nanosleep.2, clone.2, close.2, connect.2, copy_file_range.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, execveat.2, fallocate.2, fanotify_init.2, fcntl.2, flock.2, fork.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_mempolicy.2, get_robust_list.2, getcpu.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpriority.2, getrandom.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, init_module.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, intro.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl_console.2, ioctl_fat.2, ioctl_ficlonerange.2, ioctl_fideduperange.2, ioctl_getfsmap.2, ioctl_iflags.2, ioctl_list.2, ioctl_ns.2, ioctl_tty.2, ioctl_userfaultfd.2, ioperm.2, iopl.2, ioprio_set.2, ipc.2, kcmp.2, kexec_load.2, keyctl.2, kill.2, link.2, listen.2, listxattr.2, llseek.2, lookup_dcookie.2, lseek.2, madvise.2, mbind.2, membarrier.2, memfd_create.2, migrate_pages.2, mincore.2, mkdir.2, mknod.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open.2, open_by_handle_at.2, outb.2, perf_event_open.2, perfmonctl.2, personality.2, pivot_root.2, pkey_alloc.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readlink.2, readv.2, reboot.2, recv.2, recvmmsg.2, remap_file_pages.2, rename.2, request_key.2, restart_syscall.2, rt_sigqueueinfo.2, s390_pci_mmio_write.2, s390_runtime_instr.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setattr.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, seccomp.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, sendmmsg.2, set_mempolicy.2, set_thread_area.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setns.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, sgetmask.2, shmctl.2, shmget.2, shmop.2, sigaction.2, sigaltstack.2, signal.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, splice.2, spu_create.2, spu_run.2, stat.2, statfs.2, statx.2, subpage_prot.2, swapon.2, symlink.2, sync.2, sync_file_range.2, syscall.2, syscalls.2, sysctl.2, sysfs.2, sysinfo.2, syslog.2, tee.2, time.2, timer_create.2, timer_getoverrun.2, timer_settime.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unimplemented.2, unlink.2, unshare.2, uselib.2, userfaultfd.2, ustat.2, utime.2, utimensat.2, vfork.2, vmsplice.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, acos.3, acosh.3, adjtime.3, aio_fsync.3, aio_init.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, backtrace.3, basename.3, bindresvport.3, bsd_signal.3, bsearch.3, bswap.3, btree.3, byteorder.3, bzero.3, canonicalize_file_name.3, carg.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, cfree.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, cmsg.3, confstr.3, copysign.3, cos.3, cosh.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctime.3, dbopen.3, dl_iterate_phdr.3, dladdr.3, dlerror.3, dlinfo.3, dlopen.3, dlsym.3, drand48.3, drand48_r.3, duplocale.3, encrypt.3, end.3, endian.3, envz_add.3, erf.3, erfc.3, err.3, errno.3, error.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, fgetgrent.3, fgetpwent.3, finite.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fopen.3, fopencookie.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, frexp.3, fseek.3, fseeko.3, ftime.3, fts.3, ftw.3, futimes.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getentropy.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getumask.3, getutent.3, getwchar.3, glob.3, gnu_get_libc_version.3, grantpt.3, gsignal.3, hash.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, inet.3, inet_net_pton.3, inet_ntop.3, inet_pton.3, initgroups.3, insque.3, intro.3, isalpha.3, isgreater.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, lio_listio.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, makedev.3, mallinfo.3, malloc.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, malloc_usable_size.3, mallopt.3, matherr.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mtrace.3, newlocale.3, nextafter.3, nextup.3, nl_langinfo.3, ntp_gettime.3, offsetof.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, pow.3, pow10.3, printf.3, profil.3, program_invocation_name.3, psignal.3, pthread_atfork.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_kill_other_threads_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, ptsname.3, putgrent.3, putpwent.3, qsort.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, recno.3, regex.3, remainder.3, remove.3, remquo.3, resolver.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, rtime.3, scalb.3, scalbln.3, scandir.3, scanf.3, sched_getcpu.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigvec.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdin.3, strcasecmp.3, strcat.3, strchr.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strftime.3, strptime.3, strsignal.3, strstr.3, strtod.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, telldir.3, tempnam.3, termios.3, tgamma.3, timeradd.3, tmpnam.3, toupper.3, towlower.3, towupper.3, trunc.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, undocumented.3, unlocked_stdio.3, updwtmp.3, uselocale.3, usleep.3, wcrtomb.3, wcsdup.3, wcsnrtombs.3, wcsrtombs.3, wcstombs.3, wctob.3, wcwidth.3, wordexp.3, wprintf.3, xcrypt.3, xdr.3, y0.3, cciss.4, console_codes.4, dsp56k.4, fuse.4, hd.4, hpsa.4, initrd.4, intro.4, loop.4, random.4, rtc.4, sd.4, sk98lin.4, st.4, wavelan.4, acct.5, core.5, elf.5, filesystems.5, host.conf.5, hosts.5, locale.5, nologin.5, proc.5, resolv.conf.5, rpc.5, slabinfo.5, utmp.5, aio.7, arp.7, bootparam.7, capabilities.7, cgroup_namespaces.7, cgroups.7, charsets.7, cpuset.7, ddp.7, environ.7, epoll.7, fanotify.7, feature_test_macros.7, futex.7, inode.7, inotify.7, ip.7, ipv6.7, keyrings.7, locale.7, man-pages.7, man.7, math_error.7, mount_namespaces.7, mq_overview.7, namespaces.7, netdevice.7, netlink.7, packet.7, pipe.7, pkeys.7, pthreads.7, pty.7, raw.7, rtld-audit.7, rtnetlink.7, sched.7, session-keyring.7, signal.7, sock_diag.7, socket.7, spufs.7, suffixes.7, tcp.7, udp.7, udplite.7, unicode.7, units.7, unix.7, uri.7, user_namespaces.7, vdso.7, x25.7, xattr.7, iconvconfig.8, ld.so.8, ldconfig.8, sln.8: Update timestamps
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
futex.2, get_kernel_syms.2, getdents.2, getrlimit.2, getunwind.2, init_module.2, ioctl_console.2, ioctl_ficlonerange.2, ioctl_fideduperange.2, ioctl_ns.2, ioctl_tty.2, ioctl_userfaultfd.2: ffix
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
request_key.2, sigaltstack.2, __ppc_set_ppr_med.3, __ppc_yield.3, getw.3, setbuf.3, setjmp.3, lirc.4, core.5, securetty.5, inode.7, keyrings.7, process-keyring.7, user-keyring.7, ld.so.8: srcfix: use .PP instead of .P
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
clock_getres.2, clock_nanosleep.2, clone.2, close.2, connect.2, copy_file_range.2, create_module.2, delete_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, execveat.2, fallocate.2, flock.2, fork.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_mempolicy.2, get_robust_list.2, getcpu.2, getdents.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpriority.2, getrandom.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, init_module.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, intro.2, io_cancel.2, io_destroy.2, io_getevents.2, io_setup.2, io_submit.2, ioctl_fat.2, ioctl_ficlonerange.2, ioctl_fideduperange.2, ioctl_tty.2, ioctl_userfaultfd.2, ioperm.2, iopl.2, ioprio_set.2, kcmp.2, kexec_load.2, keyctl.2, kill.2, link.2, listen.2, listxattr.2, llseek.2, lookup_dcookie.2, lseek.2, madvise.2, mbind.2, membarrier.2, memfd_create.2, migrate_pages.2, mincore.2, mkdir.2, mknod.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgctl.2, msgget.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, open_by_handle_at.2, outb.2, perf_event_open.2, perfmonctl.2, personality.2, pivot_root.2, pkey_alloc.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, quotactl.2, read.2, readahead.2, readdir.2, readv.2, reboot.2, recv.2, recvmmsg.2, remap_file_pages.2, rename.2, request_key.2, restart_syscall.2, rt_sigqueueinfo.2, s390_pci_mmio_write.2, s390_runtime_instr.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setattr.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, seccomp.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, sendmmsg.2, set_mempolicy.2, set_thread_area.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setns.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, sgetmask.2, shmctl.2, shmget.2, shmop.2, sigaction.2, sigaltstack.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, splice.2, spu_create.2, spu_run.2, stat.2, statfs.2, statx.2, subpage_prot.2, swapon.2, symlink.2, sync.2, sync_file_range.2, syscalls.2, sysctl.2, sysinfo.2, syslog.2, tee.2, time.2, timer_create.2, timer_getoverrun.2, timer_settime.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, unimplemented.2, unlink.2, unshare.2, uselib.2, userfaultfd.2, utime.2, utimensat.2, vfork.2, vmsplice.2, wait.2, wait4.2, write.2: Formatting fix: replace blank lines with .PP/.IP
Blank lines shouldn't generally appear in *roff source (other
than in code examples), since they create large vertical
spaces between text blocks.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
clock_getres.2, clock_nanosleep.2, close.2, connect.2, create_module.2, dup.2, epoll_create.2, epoll_ctl.2, epoll_wait.2, eventfd.2, execve.2, execveat.2, exit_group.2, fanotify_mark.2, flock.2, fork.2, fsync.2, futex.2, futimesat.2, get_kernel_syms.2, get_mempolicy.2, get_robust_list.2, getcpu.2, getdomainname.2, getgid.2, getgroups.2, gethostname.2, getitimer.2, getpagesize.2, getpeername.2, getpid.2, getpriority.2, getrandom.2, getresuid.2, getrlimit.2, getrusage.2, getsid.2, getsockname.2, getsockopt.2, gettid.2, gettimeofday.2, getuid.2, getunwind.2, getxattr.2, idle.2, inotify_add_watch.2, inotify_init.2, inotify_rm_watch.2, ioctl.2, ioctl_fat.2, ioctl_ficlonerange.2, ioctl_fideduperange.2, ioctl_getfsmap.2, ioctl_tty.2, ioperm.2, iopl.2, keyctl.2, kill.2, link.2, listen.2, listxattr.2, llseek.2, lseek.2, madvise.2, mbind.2, membarrier.2, memfd_create.2, migrate_pages.2, mincore.2, mkdir.2, mknod.2, mlock.2, mmap.2, mmap2.2, modify_ldt.2, mount.2, move_pages.2, mprotect.2, mq_getsetattr.2, mremap.2, msgop.2, msync.2, nanosleep.2, nfsservctl.2, nice.2, pause.2, pciconfig_read.2, perf_event_open.2, perfmonctl.2, personality.2, pkey_alloc.2, poll.2, posix_fadvise.2, prctl.2, pread.2, process_vm_readv.2, ptrace.2, query_module.2, read.2, readahead.2, readdir.2, readv.2, reboot.2, recv.2, remap_file_pages.2, removexattr.2, rename.2, request_key.2, rmdir.2, rt_sigqueueinfo.2, sched_get_priority_max.2, sched_rr_get_interval.2, sched_setaffinity.2, sched_setparam.2, sched_setscheduler.2, sched_yield.2, select.2, select_tut.2, semctl.2, semget.2, semop.2, send.2, sendfile.2, set_mempolicy.2, set_tid_address.2, seteuid.2, setfsgid.2, setfsuid.2, setgid.2, setns.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, setup.2, setxattr.2, sgetmask.2, shmctl.2, shmget.2, shutdown.2, sigaction.2, sigaltstack.2, sigpending.2, sigprocmask.2, sigsuspend.2, sigwaitinfo.2, socket.2, socketcall.2, socketpair.2, stat.2, statfs.2, stime.2, swapon.2, symlink.2, sync.2, sysctl.2, sysinfo.2, syslog.2, time.2, timer_create.2, timer_delete.2, timer_getoverrun.2, timer_settime.2, timerfd_create.2, times.2, tkill.2, truncate.2, umask.2, umount.2, uname.2, unlink.2, unshare.2, uselib.2, userfaultfd.2, ustat.2, utime.2, utimensat.2, vfork.2, vhangup.2, vm86.2, wait.2, wait4.2, write.2, CPU_SET.3, INFINITY.3, __ppc_get_timebase.3, __ppc_set_ppr_med.3, __ppc_yield.3, __setfpucw.3, a64l.3, abort.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_cancel.3, aio_error.3, aio_fsync.3, aio_init.3, aio_read.3, aio_return.3, aio_suspend.3, aio_write.3, alloca.3, argz_add.3, asin.3, asinh.3, asprintf.3, assert.3, assert_perror.3, atan.3, atan2.3, atanh.3, atexit.3, atof.3, atoi.3, basename.3, bcmp.3, bcopy.3, bsd_signal.3, bsearch.3, bstring.3, btowc.3, byteorder.3, cabs.3, cacos.3, cacosh.3, canonicalize_file_name.3, carg.3, casin.3, casinh.3, catan.3, catanh.3, catopen.3, cbrt.3, ccos.3, ccosh.3, ceil.3, cexp.3, cexp2.3, cfree.3, cimag.3, clearenv.3, clock.3, clock_getcpuclockid.3, clog.3, clog10.3, clog2.3, closedir.3, cmsg.3, confstr.3, conj.3, copysign.3, cos.3, cosh.3, cpow.3, cproj.3, creal.3, crypt.3, csin.3, csinh.3, csqrt.3, ctan.3, ctanh.3, ctermid.3, ctime.3, daemon.3, difftime.3, dirfd.3, div.3, dlerror.3, dlopen.3, dlsym.3, drand48.3, drand48_r.3, duplocale.3, dysize.3, ecvt.3, ecvt_r.3, encrypt.3, endian.3, erf.3, erfc.3, err.3, errno.3, ether_aton.3, euidaccess.3, exec.3, exit.3, exp.3, exp10.3, exp2.3, expm1.3, fabs.3, fclose.3, fcloseall.3, fdim.3, fenv.3, ferror.3, fexecve.3, fflush.3, ffs.3, fgetc.3, fgetgrent.3, fgetpwent.3, fgetwc.3, fgetws.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmemopen.3, fmin.3, fmod.3, fmtmsg.3, fnmatch.3, fopen.3, fpathconf.3, fpclassify.3, fpurge.3, fputwc.3, fputws.3, fread.3, frexp.3, fseek.3, fseeko.3, ftime.3, ftok.3, fts.3, ftw.3, futimes.3, fwide.3, gamma.3, gcvt.3, get_nprocs_conf.3, get_phys_pages.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getcontext.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getentropy.3, getenv.3, getfsent.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getifaddrs.3, getipnodebyname.3, getline.3, getloadavg.3, getlogin.3, getmntent.3, getnameinfo.3, getnetent.3, getnetent_r.3, getopt.3, getpass.3, getprotoent.3, getprotoent_r.3, getpt.3, getpw.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent_r.3, getrpcport.3, gets.3, getservent.3, getservent_r.3, getspnam.3, getsubopt.3, getttyent.3, getumask.3, getusershell.3, getutent.3, getw.3, getwchar.3, glob.3, grantpt.3, group_member.3, gsignal.3, hsearch.3, hypot.3, iconv.3, iconv_close.3, iconv_open.3, if_nameindex.3, if_nametoindex.3, ilogb.3, index.3, inet.3, inet_net_pton.3, inet_ntop.3, infnan.3, initgroups.3, insque.3, isalpha.3, isatty.3, isfdtype.3, isgreater.3, iswalnum.3, iswalpha.3, iswblank.3, iswcntrl.3, iswctype.3, iswdigit.3, iswgraph.3, iswlower.3, iswprint.3, iswpunct.3, iswspace.3, iswupper.3, iswxdigit.3, j0.3, key_setsecret.3, killpg.3, ldexp.3, lgamma.3, localeconv.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, login.3, lrint.3, lround.3, lsearch.3, lseek64.3, makecontext.3, malloc.3, malloc_get_state.3, malloc_hook.3, malloc_info.3, matherr.3, mblen.3, mbrlen.3, mbrtowc.3, mbsinit.3, mbsnrtowcs.3, mbsrtowcs.3, mbstowcs.3, mbtowc.3, mcheck.3, memccpy.3, memchr.3, memcmp.3, memcpy.3, memfrob.3, memmem.3, memmove.3, mempcpy.3, memset.3, mkdtemp.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mpool.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_open.3, mq_receive.3, mq_send.3, mq_unlink.3, mtrace.3, nan.3, netlink.3, newlocale.3, nextafter.3, nl_langinfo.3, offsetof.3, on_exit.3, open_memstream.3, opendir.3, openpty.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, pow.3, pow10.3, printf.3, profil.3, psignal.3, pthread_atfork.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_attr_setdetachstate.3, pthread_attr_setguardsize.3, pthread_attr_setinheritsched.3, pthread_attr_setschedparam.3, pthread_attr_setschedpolicy.3, pthread_attr_setscope.3, pthread_attr_setstack.3, pthread_attr_setstackaddr.3, pthread_attr_setstacksize.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_cleanup_push_defer_np.3, pthread_create.3, pthread_detach.3, pthread_equal.3, pthread_exit.3, pthread_getattr_default_np.3, pthread_getattr_np.3, pthread_getcpuclockid.3, pthread_join.3, pthread_kill.3, pthread_rwlockattr_setkind_np.3, pthread_self.3, pthread_setaffinity_np.3, pthread_setcancelstate.3, pthread_setconcurrency.3, pthread_setname_np.3, pthread_setschedparam.3, pthread_setschedprio.3, pthread_sigmask.3, pthread_sigqueue.3, pthread_testcancel.3, pthread_tryjoin_np.3, pthread_yield.3, ptsname.3, putenv.3, putgrent.3, putpwent.3, puts.3, putwchar.3, qecvt.3, qsort.3, raise.3, rand.3, random.3, random_r.3, rcmd.3, re_comp.3, readdir.3, realpath.3, remainder.3, remove.3, remquo.3, resolver.3, rewinddir.3, rexec.3, rint.3, round.3, rpmatch.3, rtime.3, rtnetlink.3, scalb.3, scalbln.3, scandir.3, scanf.3, sched_getcpu.3, seekdir.3, sem_close.3, sem_destroy.3, sem_getvalue.3, sem_init.3, sem_open.3, sem_post.3, sem_unlink.3, sem_wait.3, setaliasent.3, setbuf.3, setenv.3, setlocale.3, setlogmask.3, setnetgrent.3, shm_open.3, siginterrupt.3, signbit.3, significand.3, sigpause.3, sigqueue.3, sigset.3, sigvec.3, sigwait.3, sin.3, sincos.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stdarg.3, stdio.3, stdio_ext.3, stpcpy.3, stpncpy.3, strcasecmp.3, strcat.3, strchr.3, strcmp.3, strcoll.3, strcpy.3, strdup.3, strerror.3, strfmon.3, strfromd.3, strfry.3, strftime.3, strlen.3, strnlen.3, strpbrk.3, strptime.3, strsep.3, strsignal.3, strspn.3, strstr.3, strtod.3, strtoimax.3, strtok.3, strtol.3, strtoul.3, strverscmp.3, strxfrm.3, swab.3, sysconf.3, syslog.3, system.3, sysv_signal.3, tan.3, tanh.3, tcgetpgrp.3, tcgetsid.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, toupper.3, towctrans.3, towlower.3, towupper.3, trunc.3, tsearch.3, ttyname.3, ttyslot.3, tzset.3, ualarm.3, ulimit.3, ungetwc.3, unlocked_stdio.3, unlockpt.3, updwtmp.3, uselocale.3, usleep.3, wcpcpy.3, wcpncpy.3, wcrtomb.3, wcscasecmp.3, wcscat.3, wcschr.3, wcscmp.3, wcscpy.3, wcscspn.3, wcsdup.3, wcslen.3, wcsncasecmp.3, wcsncat.3, wcsncmp.3, wcsncpy.3, wcsnlen.3, wcsnrtombs.3, wcspbrk.3, wcsrchr.3, wcsrtombs.3, wcsspn.3, wcsstr.3, wcstoimax.3, wcstok.3, wcstombs.3, wcswidth.3, wctob.3, wctomb.3, wctrans.3, wctype.3, wcwidth.3, wmemchr.3, wmemcmp.3, wmemcpy.3, wmemmove.3, wmemset.3, wordexp.3, wprintf.3, xcrypt.3, y0.3, dsp56k.4, random.4, rtc.4, st.4, ddp.7, ip.7, ipv6.7, packet.7, rtnetlink.7, socket.7, tcp.7, udp.7, udplite.7, x25.7: ffix
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
'\' must be escaped.
Signed-off-by: Douglas Caetano dos Santos <douglascs@taghos.com.br>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Signed-off-by: Alexander Alemayhu <alexander@alemayhu.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Changed to "will" instead of "with".
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
bdflush.2, bpf.2, close.2, epoll_ctl.2, epoll_wait.2, execve.2, execveat.2, fanotify_init.2, fanotify_mark.2, fcntl.2, fsync.2, get_kernel_syms.2, getdomainname.2, getgroups.2, gethostname.2, getrandom.2, getrlimit.2, getrusage.2, getsid.2, getunwind.2, io_getevents.2, ioctl_fat.2, kexec_load.2, killpg.2, listxattr.2, lseek.2, madvise.2, memfd_create.2, mknod.2, mlock.2, modify_ldt.2, msgctl.2, msgget.2, msgop.2, readlink.2, readv.2, reboot.2, recvmmsg.2, rename.2, request_key.2, restart_syscall.2, sched_setaffinity.2, sched_setattr.2, sched_setparam.2, seccomp.2, select_tut.2, semctl.2, semget.2, semop.2, set_thread_area.2, seteuid.2, setgid.2, setpgid.2, setresuid.2, setreuid.2, setsid.2, setuid.2, shmctl.2, shmget.2, shmop.2, sigaction.2, sigprocmask.2, stat.2, symlink.2, syscall.2, sysctl.2, unlink.2, bindresvport.3, byteorder.3, dlopen.3, endian.3, error.3, ffs.3, fmemopen.3, getcwd.3, getlogin.3, getnetent.3, getprotoent.3, getservent.3, getumask.3, getutent.3, glob.3, isalpha.3, lio_listio.3, login.3, mbsinit.3, mbstowcs.3, mbtowc.3, mkstemp.3, nextup.3, ntp_gettime.3, posix_fallocate.3, posix_spawn.3, pthread_join.3, pthread_rwlockattr_setkind_np.3, random.3, rcmd.3, realpath.3, resolver.3, setjmp.3, setnetgrent.3, sigvec.3, strerror.3, strverscmp.3, system.3, toupper.3, towlower.3, towupper.3, wcstombs.3, wordexp.3, cciss.4, loop.4, mouse.4, random.4, core.5, group.5, hosts.5, resolv.conf.5, ascii.7, environ.7, epoll.7, glob.7, ip.7, mq_overview.7, packet.7, pipe.7, raw.7, sched.7, signal.7, socket.7, symlink.7, ld.so.8, sln.8: tstamp
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
bdflush.2, bind.2, bpf.2, brk.2, chdir.2, chmod.2, chown.2, chroot.2, clock_nanosleep.2, clone.2, close.2, connect.2, copy_file_range.2, create_module.2, delete_module.2, dup.2, epoll_ctl.2, eventfd.2, execve.2, fallocate.2, fanotify_init.2, fcntl.2, flock.2, fork.2, fsync.2, futex.2, get_kernel_syms.2, getdomainname.2, getgroups.2, gethostname.2, getpagesize.2, getpeername.2, getsid.2, getsockname.2, getsockopt.2, gettimeofday.2, init_module.2, ioctl.2, ioctl_list.2, ioperm.2, iopl.2, kexec_load.2, kill.2, killpg.2, link.2, listen.2, llseek.2, lseek.2, madvise.2, memfd_create.2, mincore.2, mkdir.2, mknod.2, mmap.2, mount.2, nanosleep.2, nice.2, open.2, personality.2, pipe.2, poll.2, posix_fadvise.2, read.2, readahead.2, readlink.2, readv.2, recv.2, recvmmsg.2, rename.2, request_key.2, sched_setaffinity.2, sched_setattr.2, select.2, select_tut.2, semctl.2, semop.2, send.2, sendfile.2, sendmmsg.2, seteuid.2, setns.2, setpgid.2, setreuid.2, shutdown.2, sigaction.2, sigaltstack.2, signal.2, signalfd.2, sigpending.2, sigprocmask.2, sigsuspend.2, socketpair.2, splice.2, stat.2, statfs.2, stime.2, symlink.2, sync.2, syscall.2, syscalls.2, times.2, truncate.2, unlink.2, unshare.2, uselib.2, utimensat.2, vfork.2, vhangup.2, wait.2, wait4.2, write.2, a64l.3, abs.3, acos.3, acosh.3, addseverity.3, adjtime.3, aio_read.3, aio_write.3, asin.3, asinh.3, atan.3, atan2.3, atanh.3, atoi.3, backtrace.3, cbrt.3, ceil.3, cfree.3, clearenv.3, clock_getcpuclockid.3, clog10.3, cmsg.3, copysign.3, cos.3, cosh.3, ctermid.3, ctime.3, daemon.3, dirfd.3, div.3, dl_iterate_phdr.3, drand48.3, drand48_r.3, dysize.3, ecvt.3, ecvt_r.3, endian.3, erf.3, erfc.3, errno.3, exec.3, exp.3, exp2.3, expm1.3, fabs.3, fdim.3, ferror.3, fexecve.3, ffs.3, fgetgrent.3, fgetpwent.3, finite.3, flockfile.3, floor.3, fma.3, fmax.3, fmin.3, fmod.3, fopen.3, fpclassify.3, frexp.3, fseeko.3, fts.3, futimes.3, fwide.3, gamma.3, gcvt.3, getaddrinfo.3, getcwd.3, getdate.3, getdirentries.3, getdtablesize.3, getgrent.3, getgrent_r.3, getgrnam.3, getgrouplist.3, gethostbyname.3, gethostid.3, getline.3, getloadavg.3, getmntent.3, getnameinfo.3, getnetent_r.3, getpass.3, getprotoent_r.3, getpwent.3, getpwent_r.3, getpwnam.3, getrpcent_r.3, getservent_r.3, getspnam.3, getsubopt.3, getusershell.3, getutent.3, getw.3, gsignal.3, hypot.3, ilogb.3, inet.3, initgroups.3, insque.3, isalpha.3, isgreater.3, iswblank.3, j0.3, ldexp.3, lgamma.3, lio_listio.3, lockf.3, log.3, log10.3, log1p.3, log2.3, logb.3, lrint.3, lround.3, makedev.3, matherr.3, mbsnrtowcs.3, mkdtemp.3, mkfifo.3, mkstemp.3, mktemp.3, modf.3, mq_close.3, mq_getattr.3, mq_notify.3, mq_receive.3, mq_send.3, nan.3, nextafter.3, on_exit.3, open_memstream.3, opendir.3, perror.3, popen.3, posix_fallocate.3, posix_madvise.3, posix_memalign.3, posix_openpt.3, posix_spawn.3, pow.3, printf.3, profil.3, psignal.3, pthread_attr_setstack.3, pthread_setaffinity_np.3, putenv.3, putpwent.3, qecvt.3, rand.3, random.3, random_r.3, rcmd.3, readdir.3, realpath.3, remainder.3, remquo.3, rexec.3, rint.3, round.3, rpc.3, rpmatch.3, scalb.3, scalbln.3, scandir.3, scanf.3, seekdir.3, sem_wait.3, setbuf.3, setenv.3, setjmp.3, setnetgrent.3, siginterrupt.3, signbit.3, significand.3, sigset.3, sigsetops.3, sigvec.3, sigwait.3, sin.3, sinh.3, sleep.3, sockatmark.3, sqrt.3, statvfs.3, stpcpy.3, stpncpy.3, strdup.3, strerror.3, strftime.3, strlen.3, strnlen.3, strsep.3, strsignal.3, strtod.3, strtok.3, strtol.3, strtoul.3, syslog.3, system.3, tan.3, tanh.3, telldir.3, tempnam.3, termios.3, tgamma.3, timegm.3, timeradd.3, tmpfile.3, tmpnam.3, toascii.3, trunc.3, ttyslot.3, tzset.3, ualarm.3, unlocked_stdio.3, usleep.3, wcpcpy.3, wcpncpy.3, wcscasecmp.3, wcsdup.3, wcsncasecmp.3, wcsnlen.3, wcsnrtombs.3, wprintf.3, y0.3, pts.4, st.4, tty_ioctl.4, elf.5, gai.conf.5, group.5, locale.5, nsswitch.conf.5, proc.5, utmp.5, aio.7, capabilities.7, credentials.7, environ.7, epoll.7, fanotify.7, feature_test_macros.7, inotify.7, ip.7, mq_overview.7, namespaces.7, pipe.7, signal.7, socket.7, standards.7, svipc.7, symlink.7, time.7, unicode.7, unix.7: tstamp
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
The close-on-exec file descriptor flag is automatically enabled
for FDs returned by bpf().
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Signed-off-by: Jakub Wilk <jwilk@jwilk.net>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
|
|
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Also add a missing period in the errno section.
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
A couple of follow-ups to the bpf(2) man-page, besides others:
* Description of map data types
* Explanation on eBPF tail calls and program arrays
* Paragraph on tc holding ref of the eBPF program in the kernel
* Updated ASCII image with tc ingress and egress invocations
* __sync_fetch_and_add() and example usage mentioned on arrays
* minor reword on the licensing and other minor fixups
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
chroot.2, clock_getres.2, clone.2, eventfd.2, fallocate.2, fork.2, getgroups.2, gethostname.2, getpid.2, getpriority.2, getrlimit.2, getrusage.2, gettid.2, iopl.2, ioprio_set.2, killpg.2, mlock.2, mprotect.2, perf_event_open.2, poll.2, posix_fadvise.2, pread.2, ptrace.2, read.2, readv.2, recv.2, rename.2, sched_setaffinity.2, sched_setattr.2, seccomp.2, select.2, send.2, seteuid.2, setgid.2, setresuid.2, setreuid.2, setuid.2, sigaltstack.2, signalfd.2, sigpending.2, sigprocmask.2, sigreturn.2, sigsuspend.2, sigwaitinfo.2, socket.2, stat.2, timer_create.2, uname.2, utimensat.2, wait.2, wait4.2, write.2, MB_LEN_MAX.3, __ppc_get_timebase.3, clearenv.3, dl_iterate_phdr.3, error.3, fexecve.3, fpurge.3, fread.3, fts.3, getaddrinfo.3, getaddrinfo_a.3, getauxval.3, getgrent_r.3, gethostbyname.3, getifaddrs.3, getnameinfo.3, getnetent_r.3, getprotoent.3, getprotoent_r.3, getpw.3, getpwent_r.3, getrpcent.3, getrpcent_r.3, getrpcport.3, getservent.3, getservent_r.3, gsignal.3, key_setsecret.3, malloc_get_state.3, malloc_info.3, malloc_stats.3, malloc_trim.3, memcpy.3, mq_notify.3, mq_open.3, perror.3, profil.3, psignal.3, pthread_attr_init.3, pthread_attr_setaffinity_np.3, pthread_cancel.3, pthread_cleanup_push.3, pthread_create.3, pthread_detach.3, pthread_getattr_np.3, pthread_join.3, pthread_setname_np.3, pthread_tryjoin_np.3, putgrent.3, rcmd.3, rpc.3, rpmatch.3, sem_close.3, sem_open.3, setaliasent.3, shm_open.3, sigqueue.3, strfmon.3, xcrypt.3, xdr.3, console_codes.4, null.4, core.5, host.conf.5, hosts.equiv.5, locale.5, repertoiremap.5, locale.7, man-pages.7, pty.7, rtld-audit.7, sched.7, vdso.7: tstamp
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Reported-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Reported-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Reported-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Reported-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Plus various other improvements of my own.
Reported-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Reported-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Reported-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
|
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
|
