Cost model fix for parallel seq scan.
e->nnodes++;
/* Call estimators for parallel-aware nodes. */
- switch (nodeTag(planstate))
+ if (planstate->plan->parallel_aware)
{
- case T_SeqScanState:
- ExecSeqScanEstimate((SeqScanState *) planstate,
- e->pcxt);
- break;
- default:
- break;
+ switch (nodeTag(planstate))
+ {
+ case T_SeqScanState:
+ ExecSeqScanEstimate((SeqScanState *) planstate,
+ e->pcxt);
+ break;
+ default:
+ break;
+ }
}
return planstate_tree_walker(planstate, ExecParallelEstimate, e);
}
/*
- * Ordinary plan nodes won't do anything here, but parallel-aware plan nodes
- * may need to initialize shared state in the DSM before parallel workers
- * are available. They can allocate the space they previous estimated using
- * shm_toc_allocate, and add the keys they previously estimated using
- * shm_toc_insert, in each case targeting pcxt->toc.
+ * Initialize the dynamic shared memory segment that will be used to control
+ * parallel execution.
*/
static bool
ExecParallelInitializeDSM(PlanState *planstate,
/* Count this node. */
d->nnodes++;
- /* Call initializers for parallel-aware plan nodes. */
- switch (nodeTag(planstate))
+ /*
+ * Call initializers for parallel-aware plan nodes.
+ *
+ * Ordinary plan nodes won't do anything here, but parallel-aware plan
+ * nodes may need to initialize shared state in the DSM before parallel
+ * workers are available. They can allocate the space they previously
+ * estimated using shm_toc_allocate, and add the keys they previously
+ * estimated using shm_toc_insert, in each case targeting pcxt->toc.
+ */
+ if (planstate->plan->parallel_aware)
{
- case T_SeqScanState:
- ExecSeqScanInitializeDSM((SeqScanState *) planstate,
- d->pcxt);
- break;
- default:
- break;
+ switch (nodeTag(planstate))
+ {
+ case T_SeqScanState:
+ ExecSeqScanInitializeDSM((SeqScanState *) planstate,
+ d->pcxt);
+ break;
+ default:
+ break;
+ }
}
return planstate_tree_walker(planstate, ExecParallelInitializeDSM, d);
return false;
/* Call initializers for parallel-aware plan nodes. */
- switch (nodeTag(planstate))
+ if (planstate->plan->parallel_aware)
{
- case T_SeqScanState:
- ExecSeqScanInitializeWorker((SeqScanState *) planstate, toc);
- break;
- default:
- break;
+ switch (nodeTag(planstate))
+ {
+ case T_SeqScanState:
+ ExecSeqScanInitializeWorker((SeqScanState *) planstate, toc);
+ break;
+ default:
+ break;
+ }
}
return planstate_tree_walker(planstate, ExecParallelInitializeWorker, toc);
else
_outBitmapset(str, NULL);
WRITE_BOOL_FIELD(parallel_aware);
+ WRITE_BOOL_FIELD(parallel_safe);
+ WRITE_INT_FIELD(parallel_degree);
WRITE_FLOAT_FIELD(rows, "%.0f");
WRITE_FLOAT_FIELD(startup_cost, "%.2f");
WRITE_FLOAT_FIELD(total_cost, "%.2f");
_outPathInfo(str, (const Path *) node);
WRITE_NODE_FIELD(subpath);
- WRITE_INT_FIELD(num_workers);
WRITE_BOOL_FIELD(single_copy);
}
WRITE_NODE_FIELD(reltargetlist);
WRITE_NODE_FIELD(pathlist);
WRITE_NODE_FIELD(ppilist);
+ WRITE_NODE_FIELD(partial_pathlist);
WRITE_NODE_FIELD(cheapest_startup_path);
WRITE_NODE_FIELD(cheapest_total_path);
WRITE_NODE_FIELD(cheapest_unique_path);
pullup restriction?)
--- bjm & tgl
+Parallel Query and Partial Paths
+--------------------------------
+
+Parallel query involves dividing up the work that needs to be performed
+either by an entire query or some portion of the query in such a way that
+some of that work can be done by one or more worker processes, which are
+called parallel workers. Parallel workers are a subtype of dynamic
+background workers; see src/backend/access/transam/README.parallel for a
+fuller description. Academic literature on parallel query suggests that
+that parallel execution strategies can be divided into essentially two
+categories: pipelined parallelism, where the execution of the query is
+divided into multiple stages and each stage is handled by a separate
+process; and partitioning parallelism, where the data is split between
+multiple processes and each process handles a subset of it. The
+literature, however, suggests that gains from pipeline parallelism are
+often very limited due to the difficulty of avoiding pipeline stalls.
+Consequently, we do not currently attempt to generate query plans that
+use this technique.
+
+Instead, we focus on partitioning paralellism, which does not require
+that the underlying table be partitioned. It only requires that (1)
+there is some method of dividing the data from at least one of the base
+tables involved in the relation across multiple processes, (2) allowing
+each process to handle its own portion of the data, and then (3)
+collecting the results. Requirements (2) and (3) is satisfied by the
+executor node Gather, which launches any number of worker processes and
+executes its single child plan in all of them (and perhaps in the leader
+also, if the children aren't generating enough data to keep the leader
+busy). Requirement (1) is handled by the SeqScan node: when invoked
+with parallel_aware = true, this node will, in effect, partition the
+table on a block by block basis, returning a subset of the tuples from
+the relation in each worker where that SeqScan is executed. A similar
+scheme could be (and probably should be) implemented for bitmap heap
+scans.
+
+Just as we do for non-parallel access methods, we build Paths to
+represent access strategies that can be used in a parallel plan. These
+are, in essence, the same strategies that are available in the
+non-parallel plan, but there is an important difference: a path that
+will run beneath a Gather node returns only a subset of the query
+results in each worker, not all of them. To form a path that can
+actually be executed, the (rather large) cost of the Gather node must be
+accounted for. For this reason among others, paths intended to run
+beneath a Gather node - which we call "partial" paths since they return
+only a subset of the results in each worker - must be kept separate from
+ordinary paths (see RelOptInfo's partial_pathlist and the function
+add_partial_path).
+
+One of the keys to making parallel query effective is to run as much of
+the query in parallel as possible. Therefore, we expect it to generally
+be desirable to postpone the Gather stage until as near to the top of the
+plan as possible. Expanding the range of cases in which more work can be
+pushed below the Gather (and costly them accurately) is likely to keep us
+busy for a long time to come.
Index rti, RangeTblEntry *rte);
static void set_plain_rel_size(PlannerInfo *root, RelOptInfo *rel,
RangeTblEntry *rte);
+static void create_parallel_paths(PlannerInfo *root, RelOptInfo *rel);
static void set_rel_consider_parallel(PlannerInfo *root, RelOptInfo *rel,
RangeTblEntry *rte);
static bool function_rte_parallel_ok(RangeTblEntry *rte);
set_plain_rel_pathlist(PlannerInfo *root, RelOptInfo *rel, RangeTblEntry *rte)
{
Relids required_outer;
- int parallel_threshold = 1000;
/*
* We don't support pushing join clauses into the quals of a seqscan, but
/* Consider sequential scan */
add_path(rel, create_seqscan_path(root, rel, required_outer, 0));
- /* Consider parallel sequential scan */
- if (rel->consider_parallel && rel->pages > parallel_threshold &&
- required_outer == NULL)
- {
- Path *path;
- int parallel_degree = 1;
-
- /*
- * Limit the degree of parallelism logarithmically based on the size
- * of the relation. This probably needs to be a good deal more
- * sophisticated, but we need something here for now.
- */
- while (rel->pages > parallel_threshold * 3 &&
- parallel_degree < max_parallel_degree)
- {
- parallel_degree++;
- parallel_threshold *= 3;
- if (parallel_threshold >= PG_INT32_MAX / 3)
- break;
- }
-
- /*
- * Ideally we should consider postponing the gather operation until
- * much later, after we've pushed joins and so on atop the parallel
- * sequential scan path. But we don't have the infrastructure for
- * that yet, so just do this for now.
- */
- path = create_seqscan_path(root, rel, required_outer, parallel_degree);
- path = (Path *)
- create_gather_path(root, rel, path, required_outer,
- parallel_degree);
- add_path(rel, path);
- }
+ /* If appropriate, consider parallel sequential scan */
+ if (rel->consider_parallel && required_outer == NULL)
+ create_parallel_paths(root, rel);
/* Consider index scans */
create_index_paths(root, rel);
create_tidscan_paths(root, rel);
}
+/*
+ * create_parallel_paths
+ * Build parallel access paths for a plain relation
+ */
+static void
+create_parallel_paths(PlannerInfo *root, RelOptInfo *rel)
+{
+ int parallel_threshold = 1000;
+ int parallel_degree = 1;
+
+ /*
+ * If this relation is too small to be worth a parallel scan, just return
+ * without doing anything ... unless it's an inheritance child. In that case,
+ * we want to generate a parallel path here anyway. It might not be worthwhile
+ * just for this relation, but when combined with all of its inheritance siblings
+ * it may well pay off.
+ */
+ if (rel->pages < parallel_threshold && rel->reloptkind == RELOPT_BASEREL)
+ return;
+
+ /*
+ * Limit the degree of parallelism logarithmically based on the size of the
+ * relation. This probably needs to be a good deal more sophisticated, but we
+ * need something here for now.
+ */
+ while (rel->pages > parallel_threshold * 3 &&
+ parallel_degree < max_parallel_degree)
+ {
+ parallel_degree++;
+ parallel_threshold *= 3;
+ if (parallel_threshold >= PG_INT32_MAX / 3)
+ break;
+ }
+
+ /* Add an unordered partial path based on a parallel sequential scan. */
+ add_partial_path(rel, create_seqscan_path(root, rel, NULL, parallel_degree));
+
+ /*
+ * If this is a baserel, consider gathering any partial paths we may have
+ * just created. If we gathered an inheritance child, we could end up
+ * with a very large number of gather nodes, each trying to grab its own
+ * pool of workers, so don't do this in that case. Instead, we'll
+ * consider gathering partial paths for the appendrel.
+ */
+ if (rel->reloptkind == RELOPT_BASEREL)
+ generate_gather_paths(root, rel);
+}
+
/*
* set_tablesample_rel_size
* Set size estimates for a sampled relation
List *live_childrels = NIL;
List *subpaths = NIL;
bool subpaths_valid = true;
+ List *partial_subpaths = NIL;
+ bool partial_subpaths_valid = true;
List *all_child_pathkeys = NIL;
List *all_child_outers = NIL;
ListCell *l;
else
subpaths_valid = false;
+ /* Same idea, but for a partial plan. */
+ if (childrel->partial_pathlist != NIL)
+ partial_subpaths = accumulate_append_subpath(partial_subpaths,
+ linitial(childrel->partial_pathlist));
+ else
+ partial_subpaths_valid = false;
+
/*
* Collect lists of all the available path orderings and
* parameterizations for all the children. We use these as a
* if we have zero or one live subpath due to constraint exclusion.)
*/
if (subpaths_valid)
- add_path(rel, (Path *) create_append_path(rel, subpaths, NULL));
+ add_path(rel, (Path *) create_append_path(rel, subpaths, NULL, 0));
+
+ /*
+ * Consider an append of partial unordered, unparameterized partial paths.
+ */
+ if (partial_subpaths_valid)
+ {
+ AppendPath *appendpath;
+ ListCell *lc;
+ int parallel_degree = 0;
+
+ /*
+ * Decide what parallel degree to request for this append path. For
+ * now, we just use the maximum parallel degree of any member. It
+ * might be useful to use a higher number if the Append node were
+ * smart enough to spread out the workers, but it currently isn't.
+ */
+ foreach(lc, partial_subpaths)
+ {
+ Path *path = lfirst(lc);
+
+ parallel_degree = Max(parallel_degree, path->parallel_degree);
+ }
+ Assert(parallel_degree > 0);
+
+ /* Generate a partial append path. */
+ appendpath = create_append_path(rel, partial_subpaths, NULL,
+ parallel_degree);
+ add_partial_path(rel, (Path *) appendpath);
+
+ /* Consider gathering it. */
+ generate_gather_paths(root, rel);
+ }
/*
* Also build unparameterized MergeAppend paths based on the collected
if (subpaths_valid)
add_path(rel, (Path *)
- create_append_path(rel, subpaths, required_outer));
+ create_append_path(rel, subpaths, required_outer, 0));
}
}
/* Discard any pre-existing paths; no further need for them */
rel->pathlist = NIL;
+ rel->partial_pathlist = NIL;
- add_path(rel, (Path *) create_append_path(rel, NIL, NULL));
+ add_path(rel, (Path *) create_append_path(rel, NIL, NULL, 0));
/*
* We set the cheapest path immediately, to ensure that IS_DUMMY_REL()
add_path(rel, create_worktablescan_path(root, rel, required_outer));
}
+/*
+ * generate_gather_paths
+ * Generate parallel access paths for a relation by pushing a Gather on
+ * top of a partial path.
+ */
+void
+generate_gather_paths(PlannerInfo *root, RelOptInfo *rel)
+{
+ Path *cheapest_partial_path;
+ Path *simple_gather_path;
+
+ /* If there are no partial paths, there's nothing to do here. */
+ if (rel->partial_pathlist == NIL)
+ return;
+
+ /*
+ * The output of Gather is currently always unsorted, so there's only one
+ * partial path of interest: the cheapest one.
+ *
+ * Eventually, we should have a Gather Merge operation that can merge
+ * multiple tuple streams together while preserving their ordering. We
+ * could usefully generate such a path from each partial path that has
+ * non-NIL pathkeys.
+ */
+ cheapest_partial_path = linitial(rel->partial_pathlist);
+ simple_gather_path = (Path *)
+ create_gather_path(root, rel, cheapest_partial_path, NULL);
+ add_path(rel, simple_gather_path);
+}
+
/*
* make_rel_from_joinlist
* Build access paths using a "joinlist" to guide the join path search.
*/
void
cost_seqscan(Path *path, PlannerInfo *root,
- RelOptInfo *baserel, ParamPathInfo *param_info,
- int nworkers)
+ RelOptInfo *baserel, ParamPathInfo *param_info)
{
Cost startup_cost = 0;
Cost run_cost = 0;
else
path->rows = baserel->rows;
+ /*
+ * Primitive parallel cost model. Assume the leader will do half as much
+ * work as a regular worker, because it will also need to read the tuples
+ * returned by the workers when they percolate up to the gather ndoe.
+ * This is almost certainly not exactly the right way to model this, so
+ * this will probably need to be changed at some point...
+ */
+ if (path->parallel_degree > 0)
+ path->rows = path->rows / (path->parallel_degree + 0.5);
+
if (!enable_seqscan)
startup_cost += disable_cost;
cpu_per_tuple = cpu_tuple_cost + qpqual_cost.per_tuple;
run_cost += cpu_per_tuple * baserel->tuples;
- /*
- * Primitive parallel cost model. Assume the leader will do half as much
- * work as a regular worker, because it will also need to read the tuples
- * returned by the workers when they percolate up to the gather ndoe.
- * This is almost certainly not exactly the right way to model this, so
- * this will probably need to be changed at some point...
- */
- if (nworkers > 0)
- run_cost = run_cost / (nworkers + 0.5);
-
path->startup_cost = startup_cost;
path->total_cost = startup_cost + run_cost;
}
static void match_unsorted_outer(PlannerInfo *root, RelOptInfo *joinrel,
RelOptInfo *outerrel, RelOptInfo *innerrel,
JoinType jointype, JoinPathExtraData *extra);
+static void consider_parallel_nestloop(PlannerInfo *root,
+ RelOptInfo *joinrel,
+ RelOptInfo *outerrel,
+ RelOptInfo *innerrel,
+ JoinType jointype,
+ JoinPathExtraData *extra);
static void hash_inner_and_outer(PlannerInfo *root, RelOptInfo *joinrel,
RelOptInfo *outerrel, RelOptInfo *innerrel,
JoinType jointype, JoinPathExtraData *extra);
jointype, &extra);
/*
- * 6. Finally, give extensions a chance to manipulate the path list.
+ * 6. Consider gathering partial paths.
+ */
+ generate_gather_paths(root, joinrel);
+
+ /*
+ * 7. Finally, give extensions a chance to manipulate the path list.
*/
if (set_join_pathlist_hook)
set_join_pathlist_hook(root, joinrel, outerrel, innerrel,
}
}
+/*
+ * try_partial_nestloop_path
+ * Consider a partial nestloop join path; if it appears useful, push it into
+ * the joinrel's partial_pathlist via add_partial_path().
+ */
+static void
+try_partial_nestloop_path(PlannerInfo *root,
+ RelOptInfo *joinrel,
+ Path *outer_path,
+ Path *inner_path,
+ List *pathkeys,
+ JoinType jointype,
+ JoinPathExtraData *extra)
+{
+ JoinCostWorkspace workspace;
+
+ /*
+ * If the inner path is parameterized, the parameterization must be fully
+ * satisfied by the proposed outer path. Parameterized partial paths are
+ * not supported. The caller should already have verified that no
+ * extra_lateral_rels are required here.
+ */
+ Assert(bms_is_empty(extra->extra_lateral_rels));
+ if (inner_path->param_info != NULL)
+ {
+ Relids inner_paramrels = inner_path->param_info->ppi_req_outer;
+
+ if (!bms_is_subset(inner_paramrels, outer_path->parent->relids))
+ return;
+ }
+
+ /*
+ * Before creating a path, get a quick lower bound on what it is likely
+ * to cost. Bail out right away if it looks terrible.
+ */
+ initial_cost_nestloop(root, &workspace, jointype,
+ outer_path, inner_path,
+ extra->sjinfo, &extra->semifactors);
+ if (!add_partial_path_precheck(joinrel, workspace.total_cost, pathkeys))
+ return;
+
+ /* Might be good enough to be worth trying, so let's try it. */
+ add_partial_path(joinrel, (Path *)
+ create_nestloop_path(root,
+ joinrel,
+ jointype,
+ &workspace,
+ extra->sjinfo,
+ &extra->semifactors,
+ outer_path,
+ inner_path,
+ extra->restrictlist,
+ pathkeys,
+ NULL));
+}
+
/*
* try_mergejoin_path
* Consider a merge join path; if it appears useful, push it into
}
}
+/*
+ * try_partial_hashjoin_path
+ * Consider a partial hashjoin join path; if it appears useful, push it into
+ * the joinrel's partial_pathlist via add_partial_path().
+ */
+static void
+try_partial_hashjoin_path(PlannerInfo *root,
+ RelOptInfo *joinrel,
+ Path *outer_path,
+ Path *inner_path,
+ List *hashclauses,
+ JoinType jointype,
+ JoinPathExtraData *extra)
+{
+ JoinCostWorkspace workspace;
+
+ /*
+ * If the inner path is parameterized, the parameterization must be fully
+ * satisfied by the proposed outer path. Parameterized partial paths are
+ * not supported. The caller should already have verified that no
+ * extra_lateral_rels are required here.
+ */
+ Assert(bms_is_empty(extra->extra_lateral_rels));
+ if (inner_path->param_info != NULL)
+ {
+ Relids inner_paramrels = inner_path->param_info->ppi_req_outer;
+
+ if (!bms_is_empty(inner_paramrels))
+ return;
+ }
+
+ /*
+ * Before creating a path, get a quick lower bound on what it is likely
+ * to cost. Bail out right away if it looks terrible.
+ */
+ initial_cost_hashjoin(root, &workspace, jointype, hashclauses,
+ outer_path, inner_path,
+ extra->sjinfo, &extra->semifactors);
+ if (!add_partial_path_precheck(joinrel, workspace.total_cost, NIL))
+ return;
+
+ /* Might be good enough to be worth trying, so let's try it. */
+ add_partial_path(joinrel, (Path *)
+ create_hashjoin_path(root,
+ joinrel,
+ jointype,
+ &workspace,
+ extra->sjinfo,
+ &extra->semifactors,
+ outer_path,
+ inner_path,
+ extra->restrictlist,
+ NULL,
+ hashclauses));
+}
+
/*
* clause_sides_match_join
* Determine whether a join clause is of the right form to use in this join.
break;
}
}
+
+ /*
+ * If the joinrel is parallel-safe and the join type supports nested loops,
+ * we may be able to consider a partial nestloop plan. However, we can't
+ * handle JOIN_UNIQUE_OUTER, because the outer path will be partial, and
+ * therefore we won't be able to properly guarantee uniqueness. Nor can
+ * we handle extra_lateral_rels, since partial paths must not be
+ * parameterized.
+ */
+ if (joinrel->consider_parallel && nestjoinOK &&
+ save_jointype != JOIN_UNIQUE_OUTER &&
+ bms_is_empty(extra->extra_lateral_rels))
+ consider_parallel_nestloop(root, joinrel, outerrel, innerrel,
+ save_jointype, extra);
+}
+
+/*
+ * consider_parallel_nestloop
+ * Try to build partial paths for a joinrel by joining a partial path for the
+ * outer relation to a complete path for the inner relation.
+ *
+ * 'joinrel' is the join relation
+ * 'outerrel' is the outer join relation
+ * 'innerrel' is the inner join relation
+ * 'jointype' is the type of join to do
+ * 'extra' contains additional input values
+ */
+static void
+consider_parallel_nestloop(PlannerInfo *root,
+ RelOptInfo *joinrel,
+ RelOptInfo *outerrel,
+ RelOptInfo *innerrel,
+ JoinType jointype,
+ JoinPathExtraData *extra)
+{
+ ListCell *lc1;
+
+ foreach(lc1, outerrel->partial_pathlist)
+ {
+ Path *outerpath = (Path *) lfirst(lc1);
+ List *pathkeys;
+ ListCell *lc2;
+
+ /* Figure out what useful ordering any paths we create will have. */
+ pathkeys = build_join_pathkeys(root, joinrel, jointype,
+ outerpath->pathkeys);
+
+ /*
+ * Try the cheapest parameterized paths; only those which will
+ * produce an unparameterized path when joined to this outerrel
+ * will survive try_partial_nestloop_path. The cheapest
+ * unparameterized path is also in this list.
+ */
+ foreach(lc2, innerrel->cheapest_parameterized_paths)
+ {
+ Path *innerpath = (Path *) lfirst(lc2);
+
+ /* Can't join to an inner path that is not parallel-safe */
+ if (!innerpath->parallel_safe)
+ continue;
+
+ /*
+ * Like match_unsorted_outer, we only consider a single nestloop
+ * path when the jointype is JOIN_UNIQUE_INNER. But we have to scan
+ * cheapest_parameterized_paths to find the one we want to consider,
+ * because cheapest_total_path might not be parallel-safe.
+ */
+ if (jointype == JOIN_UNIQUE_INNER)
+ {
+ if (!bms_is_empty(PATH_REQ_OUTER(innerpath)))
+ continue;
+ innerpath = (Path *) create_unique_path(root, innerrel,
+ innerpath, extra->sjinfo);
+ }
+
+ try_partial_nestloop_path(root, joinrel, outerpath, innerpath,
+ pathkeys, jointype, extra);
+ }
+ }
}
/*
}
}
}
+
+ /*
+ * If the joinrel is parallel-safe, we may be able to consider a
+ * partial hash join. However, we can't handle JOIN_UNIQUE_OUTER,
+ * because the outer path will be partial, and therefore we won't be
+ * able to properly guarantee uniqueness. Also, the resulting path
+ * must not be parameterized.
+ */
+ if (joinrel->consider_parallel && jointype != JOIN_UNIQUE_OUTER &&
+ outerrel->partial_pathlist != NIL &&
+ bms_is_empty(extra->extra_lateral_rels))
+ {
+ Path *cheapest_partial_outer;
+ Path *cheapest_safe_inner = NULL;
+
+ cheapest_partial_outer =
+ (Path *) linitial(outerrel->partial_pathlist);
+
+ /*
+ * Normally, given that the joinrel is parallel-safe, the cheapest
+ * total inner path will also be parallel-safe, but if not, we'll
+ * have to search cheapest_parameterized_paths for the cheapest
+ * unparameterized inner path.
+ */
+ if (cheapest_total_inner->parallel_safe)
+ cheapest_safe_inner = cheapest_total_inner;
+ else
+ {
+ ListCell *lc;
+
+ foreach(lc, innerrel->cheapest_parameterized_paths)
+ {
+ Path *innerpath = (Path *) lfirst(lc);
+
+ if (innerpath->parallel_safe &&
+ bms_is_empty(PATH_REQ_OUTER(innerpath)))
+ {
+ cheapest_safe_inner = innerpath;
+ break;
+ }
+ }
+ }
+
+ if (cheapest_safe_inner != NULL)
+ try_partial_hashjoin_path(root, joinrel,
+ cheapest_partial_outer,
+ cheapest_safe_inner,
+ hashclauses, jointype, extra);
+ }
}
}
/* Evict any previously chosen paths */
rel->pathlist = NIL;
+ rel->partial_pathlist = NIL;
/* Set up the dummy path */
- add_path(rel, (Path *) create_append_path(rel, NIL, NULL));
+ add_path(rel, (Path *) create_append_path(rel, NIL, NULL, 0));
/* Set or update cheapest_total_path and related fields */
set_cheapest(rel);
gather_plan = make_gather(subplan->targetlist,
NIL,
- best_path->num_workers,
+ best_path->path.parallel_degree,
best_path->single_copy,
subplan);
/* The only path for it is a trivial Result path */
add_path(final_rel, (Path *)
- create_result_path((List *) parse->jointree->quals));
+ create_result_path(final_rel,
+ (List *) parse->jointree->quals));
/* Select cheapest path (pretty easy in this case...) */
set_cheapest(final_rel);
* The cheapest_parameterized_paths list collects all parameterized paths
* that have survived the add_path() tournament for this relation. (Since
* add_path ignores pathkeys for a parameterized path, these will be paths
- * that have best cost or best row count for their parameterization.)
+ * that have best cost or best row count for their parameterization. We
+ * may also have both a parallel-safe and a non-parallel-safe path in some
+ * cases for the same parameterization in some cases, but this should be
+ * relatively rare since, most typically, all paths for the same relation
+ * will be paralell-safe or none of them will.)
+ *
* cheapest_parameterized_paths always includes the cheapest-total
* unparameterized path, too, if there is one; the users of that list find
* it more convenient if that's included.
* A path is worthy if it has a better sort order (better pathkeys) or
* cheaper cost (on either dimension), or generates fewer rows, than any
* existing path that has the same or superset parameterization rels.
+ * We also consider parallel-safe paths more worthy than others.
*
* We also remove from the rel's pathlist any old paths that are dominated
* by new_path --- that is, new_path is cheaper, at least as well ordered,
- * generates no more rows, and requires no outer rels not required by the
- * old path.
+ * generates no more rows, requires no outer rels not required by the old
+ * path, and is no less parallel-safe.
*
* In most cases, a path with a superset parameterization will generate
* fewer rows (since it has more join clauses to apply), so that those two
PathCostComparison costcmp;
PathKeysComparison keyscmp;
BMS_Comparison outercmp;
-
p1_next = lnext(p1);
/*
{
if ((outercmp == BMS_EQUAL ||
outercmp == BMS_SUBSET1) &&
- new_path->rows <= old_path->rows)
+ new_path->rows <= old_path->rows &&
+ new_path->parallel_safe >= old_path->parallel_safe)
remove_old = true; /* new dominates old */
}
else if (keyscmp == PATHKEYS_BETTER2)
{
if ((outercmp == BMS_EQUAL ||
outercmp == BMS_SUBSET2) &&
- new_path->rows >= old_path->rows)
+ new_path->rows >= old_path->rows &&
+ new_path->parallel_safe <= old_path->parallel_safe)
accept_new = false; /* old dominates new */
}
else /* keyscmp == PATHKEYS_EQUAL */
/*
* Same pathkeys and outer rels, and fuzzily
* the same cost, so keep just one; to decide
- * which, first check rows and then do a fuzzy
- * cost comparison with very small fuzz limit.
- * (We used to do an exact cost comparison,
- * but that results in annoying
+ * which, first check parallel-safety, then rows,
+ * then do a fuzzy cost comparison with very small
+ * fuzz limit. (We used to do an exact cost
+ * comparison, but that results in annoying
* platform-specific plan variations due to
* roundoff in the cost estimates.) If things
* are still tied, arbitrarily keep only the
* comparison decides the startup and total
* costs compare differently.
*/
- if (new_path->rows < old_path->rows)
+ if (new_path->parallel_safe >
+ old_path->parallel_safe)
+ remove_old = true; /* new dominates old */
+ else if (new_path->parallel_safe <
+ old_path->parallel_safe)
+ accept_new = false; /* old dominates new */
+ else if (new_path->rows < old_path->rows)
remove_old = true; /* new dominates old */
else if (new_path->rows > old_path->rows)
accept_new = false; /* old dominates new */
* dominates new */
}
else if (outercmp == BMS_SUBSET1 &&
- new_path->rows <= old_path->rows)
+ new_path->rows <= old_path->rows &&
+ new_path->parallel_safe >= old_path->parallel_safe)
remove_old = true; /* new dominates old */
else if (outercmp == BMS_SUBSET2 &&
- new_path->rows >= old_path->rows)
+ new_path->rows >= old_path->rows &&
+ new_path->parallel_safe <= old_path->parallel_safe)
accept_new = false; /* old dominates new */
/* else different parameterizations, keep both */
}
PATH_REQ_OUTER(old_path));
if ((outercmp == BMS_EQUAL ||
outercmp == BMS_SUBSET1) &&
- new_path->rows <= old_path->rows)
+ new_path->rows <= old_path->rows &&
+ new_path->parallel_safe >= old_path->parallel_safe)
remove_old = true; /* new dominates old */
}
break;
PATH_REQ_OUTER(old_path));
if ((outercmp == BMS_EQUAL ||
outercmp == BMS_SUBSET2) &&
- new_path->rows >= old_path->rows)
+ new_path->rows >= old_path->rows &&
+ new_path->parallel_safe <= old_path->parallel_safe)
accept_new = false; /* old dominates new */
}
break;
return true;
}
+/*
+ * add_partial_path
+ * Like add_path, our goal here is to consider whether a path is worthy
+ * of being kept around, but the considerations here are a bit different.
+ * A partial path is one which can be executed in any number of workers in
+ * parallel such that each worker will generate a subset of the path's
+ * overall result.
+ *
+ * We don't generate parameterized partial paths for several reasons. Most
+ * importantly, they're not safe to execute, because there's nothing to
+ * make sure that a parallel scan within the parameterized portion of the
+ * plan is running with the same value in every worker at the same time.
+ * Fortunately, it seems unlikely to be worthwhile anyway, because having
+ * each worker scan the entire outer relation and a subset of the inner
+ * relation will generally be a terrible plan. The inner (parameterized)
+ * side of the plan will be small anyway. There could be rare cases where
+ * this wins big - e.g. if join order constraints put a 1-row relation on
+ * the outer side of the topmost join with a parameterized plan on the inner
+ * side - but we'll have to be content not to handle such cases until somebody
+ * builds an executor infrastructure that can cope with them.
+ *
+ * Because we don't consider parameterized paths here, we also don't
+ * need to consider the row counts as a measure of quality: every path will
+ * produce the same number of rows. Neither do we need to consider startup
+ * costs: parallelism is only used for plans that will be run to completion.
+ * Therefore, this routine is much simpler than add_path: it needs to
+ * consider only pathkeys and total cost.
+ */
+void
+add_partial_path(RelOptInfo *parent_rel, Path *new_path)
+{
+ bool accept_new = true; /* unless we find a superior old path */
+ ListCell *insert_after = NULL; /* where to insert new item */
+ ListCell *p1;
+ ListCell *p1_prev;
+ ListCell *p1_next;
+
+ /* Check for query cancel. */
+ CHECK_FOR_INTERRUPTS();
+
+ /*
+ * As in add_path, throw out any paths which are dominated by the new path,
+ * but throw out the new path if some existing path dominates it.
+ */
+ p1_prev = NULL;
+ for (p1 = list_head(parent_rel->partial_pathlist); p1 != NULL;
+ p1 = p1_next)
+ {
+ Path *old_path = (Path *) lfirst(p1);
+ bool remove_old = false; /* unless new proves superior */
+ PathKeysComparison keyscmp;
+
+ p1_next = lnext(p1);
+
+ /* Compare pathkeys. */
+ keyscmp = compare_pathkeys(new_path->pathkeys, old_path->pathkeys);
+
+ /* Unless pathkeys are incompable, keep just one of the two paths. */
+ if (keyscmp != PATHKEYS_DIFFERENT)
+ {
+ if (new_path->total_cost > old_path->total_cost * STD_FUZZ_FACTOR)
+ {
+ /* New path costs more; keep it only if pathkeys are better. */
+ if (keyscmp != PATHKEYS_BETTER1)
+ accept_new = false;
+ }
+ else if (old_path->total_cost > new_path->total_cost
+ * STD_FUZZ_FACTOR)
+ {
+ /* Old path costs more; keep it only if pathkeys are better. */
+ if (keyscmp != PATHKEYS_BETTER2)
+ remove_old = true;
+ }
+ else if (keyscmp == PATHKEYS_BETTER1)
+ {
+ /* Costs are about the same, new path has better pathkeys. */
+ remove_old = true;
+ }
+ else if (keyscmp == PATHKEYS_BETTER2)
+ {
+ /* Costs are about the same, old path has better pathkeys. */
+ accept_new = false;
+ }
+ else if (old_path->total_cost > new_path->total_cost * 1.0000000001)
+ {
+ /* Pathkeys are the same, and the old path costs more. */
+ remove_old = true;
+ }
+ else
+ {
+ /*
+ * Pathkeys are the same, and new path isn't materially
+ * cheaper.
+ */
+ accept_new = false;
+ }
+ }
+
+ /*
+ * Remove current element from partial_pathlist if dominated by new.
+ */
+ if (remove_old)
+ {
+ parent_rel->partial_pathlist =
+ list_delete_cell(parent_rel->partial_pathlist, p1, p1_prev);
+ /* add_path has a special case for IndexPath; we don't need it */
+ Assert(!IsA(old_path, IndexPath));
+ pfree(old_path);
+ /* p1_prev does not advance */
+ }
+ else
+ {
+ /* new belongs after this old path if it has cost >= old's */
+ if (new_path->total_cost >= old_path->total_cost)
+ insert_after = p1;
+ /* p1_prev advances */
+ p1_prev = p1;
+ }
+
+ /*
+ * If we found an old path that dominates new_path, we can quit
+ * scanning the partial_pathlist; we will not add new_path, and we
+ * assume new_path cannot dominate any later path.
+ */
+ if (!accept_new)
+ break;
+ }
+
+ if (accept_new)
+ {
+ /* Accept the new path: insert it at proper place */
+ if (insert_after)
+ lappend_cell(parent_rel->partial_pathlist, insert_after, new_path);
+ else
+ parent_rel->partial_pathlist =
+ lcons(new_path, parent_rel->partial_pathlist);
+ }
+ else
+ {
+ /* add_path has a special case for IndexPath; we don't need it */
+ Assert(!IsA(new_path, IndexPath));
+ /* Reject and recycle the new path */
+ pfree(new_path);
+ }
+}
+
+/*
+ * add_partial_path_precheck
+ * Check whether a proposed new partial path could possibly get accepted.
+ *
+ * Unlike add_path_precheck, we can ignore startup cost and parameterization,
+ * since they don't matter for partial paths (see add_partial_path). But
+ * we do want to make sure we don't add a partial path if there's already
+ * a complete path that dominates it, since in that case the proposed path
+ * is surely a loser.
+ */
+bool
+add_partial_path_precheck(RelOptInfo *parent_rel, Cost total_cost,
+ List *pathkeys)
+{
+ ListCell *p1;
+
+ /*
+ * Our goal here is twofold. First, we want to find out whether this
+ * path is clearly inferior to some existing partial path. If so, we want
+ * to reject it immediately. Second, we want to find out whether this
+ * path is clearly superior to some existing partial path -- at least,
+ * modulo final cost computations. If so, we definitely want to consider
+ * it.
+ *
+ * Unlike add_path(), we always compare pathkeys here. This is because
+ * we expect partial_pathlist to be very short, and getting a definitive
+ * answer at this stage avoids the need to call add_path_precheck.
+ */
+ foreach(p1, parent_rel->partial_pathlist)
+ {
+ Path *old_path = (Path *) lfirst(p1);
+ PathKeysComparison keyscmp;
+
+ keyscmp = compare_pathkeys(pathkeys, old_path->pathkeys);
+ if (keyscmp != PATHKEYS_DIFFERENT)
+ {
+ if (total_cost > old_path->total_cost * STD_FUZZ_FACTOR &&
+ keyscmp != PATHKEYS_BETTER1)
+ return false;
+ if (old_path->total_cost > total_cost * STD_FUZZ_FACTOR &&
+ keyscmp != PATHKEYS_BETTER2)
+ return true;
+ }
+ }
+
+ /*
+ * This path is neither clearly inferior to an existing partial path
+ * nor clearly good enough that it might replace one. Compare it to
+ * non-parallel plans. If it loses even before accounting for the cost
+ * of the Gather node, we should definitely reject it.
+ *
+ * Note that we pass the total_cost to add_path_precheck twice. This is
+ * because it's never advantageous to consider the startup cost of a
+ * partial path; the resulting plans, if run in parallel, will be run to
+ * completion.
+ */
+ if (!add_path_precheck(parent_rel, total_cost, total_cost, pathkeys,
+ NULL))
+ return false;
+
+ return true;
+}
+
/*****************************************************************************
* PATH NODE CREATION ROUTINES
*/
Path *
create_seqscan_path(PlannerInfo *root, RelOptInfo *rel,
- Relids required_outer, int nworkers)
+ Relids required_outer, int parallel_degree)
{
Path *pathnode = makeNode(Path);
pathnode->parent = rel;
pathnode->param_info = get_baserel_parampathinfo(root, rel,
required_outer);
- pathnode->parallel_aware = nworkers > 0 ? true : false;
+ pathnode->parallel_aware = parallel_degree > 0 ? true : false;
+ pathnode->parallel_safe = rel->consider_parallel;
+ pathnode->parallel_degree = parallel_degree;
pathnode->pathkeys = NIL; /* seqscan has unordered result */
- cost_seqscan(pathnode, root, rel, pathnode->param_info, nworkers);
+ cost_seqscan(pathnode, root, rel, pathnode->param_info);
return pathnode;
}
pathnode->param_info = get_baserel_parampathinfo(root, rel,
required_outer);
pathnode->parallel_aware = false;
+ pathnode->parallel_safe = rel->consider_parallel;
+ pathnode->parallel_degree = 0;
pathnode->pathkeys = NIL; /* samplescan has unordered result */
cost_samplescan(pathnode, root, rel, pathnode->param_info);
pathnode->path.param_info = get_baserel_parampathinfo(root, rel,
required_outer);
pathnode->path.parallel_aware = false;
+ pathnode->path.parallel_safe = rel->consider_parallel;
+ pathnode->path.parallel_degree = 0;
pathnode->path.pathkeys = pathkeys;
/* Convert clauses to indexquals the executor can handle */
pathnode->path.param_info = get_baserel_parampathinfo(root, rel,
required_outer);
pathnode->path.parallel_aware = false;
+ pathnode->path.parallel_safe = rel->consider_parallel;
+ pathnode->path.parallel_degree = 0;
pathnode->path.pathkeys = NIL; /* always unordered */
pathnode->bitmapqual = bitmapqual;
pathnode->path.parent = rel;
pathnode->path.param_info = NULL; /* not used in bitmap trees */
pathnode->path.parallel_aware = false;
+ pathnode->path.parallel_safe = rel->consider_parallel;
+ pathnode->path.parallel_degree = 0;
pathnode->path.pathkeys = NIL; /* always unordered */
pathnode->bitmapquals = bitmapquals;
pathnode->path.parent = rel;
pathnode->path.param_info = NULL; /* not used in bitmap trees */
pathnode->path.parallel_aware = false;
+ pathnode->path.parallel_safe = rel->consider_parallel;
+ pathnode->path.parallel_degree = 0;
pathnode->path.pathkeys = NIL; /* always unordered */
pathnode->bitmapquals = bitmapquals;
pathnode->path.param_info = get_baserel_parampathinfo(root, rel,
required_outer);
pathnode->path.parallel_aware = false;
+ pathnode->path.parallel_safe = rel->consider_parallel;
+ pathnode->path.parallel_degree = 0;
pathnode->path.pathkeys = NIL; /* always unordered */
pathnode->tidquals = tidquals;
* Note that we must handle subpaths = NIL, representing a dummy access path.
*/
AppendPath *
-create_append_path(RelOptInfo *rel, List *subpaths, Relids required_outer)
+create_append_path(RelOptInfo *rel, List *subpaths, Relids required_outer,
+ int parallel_degree)
{
AppendPath *pathnode = makeNode(AppendPath);
ListCell *l;
pathnode->path.param_info = get_appendrel_parampathinfo(rel,
required_outer);
pathnode->path.parallel_aware = false;
+ pathnode->path.parallel_safe = rel->consider_parallel;
+ pathnode->path.parallel_degree = parallel_degree;
pathnode->path.pathkeys = NIL; /* result is always considered
* unsorted */
pathnode->subpaths = subpaths;
pathnode->path.param_info = get_appendrel_parampathinfo(rel,
required_outer);
pathnode->path.parallel_aware = false;
+ pathnode->path.parallel_safe = rel->consider_parallel;
+ pathnode->path.parallel_degree = 0;
pathnode->path.pathkeys = pathkeys;
pathnode->subpaths = subpaths;
* This is only used for the case of a query with an empty jointree.
*/
ResultPath *
-create_result_path(List *quals)
+create_result_path(RelOptInfo *rel, List *quals)
{
ResultPath *pathnode = makeNode(ResultPath);
pathnode->path.parent = NULL;
pathnode->path.param_info = NULL; /* there are no other rels... */
pathnode->path.parallel_aware = false;
+ pathnode->path.parallel_safe = rel->consider_parallel;
+ pathnode->path.parallel_degree = 0;
pathnode->path.pathkeys = NIL;
pathnode->quals = quals;
pathnode->path.parent = rel;
pathnode->path.param_info = subpath->param_info;
pathnode->path.parallel_aware = false;
+ pathnode->path.parallel_safe = rel->consider_parallel;
+ pathnode->path.parallel_degree = 0;
pathnode->path.pathkeys = subpath->pathkeys;
pathnode->subpath = subpath;
pathnode->path.parent = rel;
pathnode->path.param_info = subpath->param_info;
pathnode->path.parallel_aware = false;
+ pathnode->path.parallel_safe = rel->consider_parallel;
+ pathnode->path.parallel_degree = 0;
/*
* Assume the output is unsorted, since we don't necessarily have pathkeys
*/
GatherPath *
create_gather_path(PlannerInfo *root, RelOptInfo *rel, Path *subpath,
- Relids required_outer, int nworkers)
+ Relids required_outer)
{
GatherPath *pathnode = makeNode(GatherPath);
+ Assert(subpath->parallel_safe);
+
pathnode->path.pathtype = T_Gather;
pathnode->path.parent = rel;
pathnode->path.param_info = get_baserel_parampathinfo(root, rel,
required_outer);
pathnode->path.parallel_aware = false;
+ pathnode->path.parallel_safe = false;
+ pathnode->path.parallel_degree = subpath->parallel_degree;
pathnode->path.pathkeys = NIL; /* Gather has unordered result */
pathnode->subpath = subpath;
- pathnode->num_workers = nworkers;
+ pathnode->single_copy = false;
+
+ if (pathnode->path.parallel_degree == 0)
+ {
+ pathnode->path.parallel_degree = 1;
+ pathnode->path.pathkeys = subpath->pathkeys;
+ pathnode->single_copy = true;
+ }
cost_gather(pathnode, root, rel, pathnode->path.param_info);
pathnode->param_info = get_baserel_parampathinfo(root, rel,
required_outer);
pathnode->parallel_aware = false;
+ pathnode->parallel_safe = rel->consider_parallel;
+ pathnode->parallel_degree = 0;
pathnode->pathkeys = pathkeys;
cost_subqueryscan(pathnode, root, rel, pathnode->param_info);
pathnode->param_info = get_baserel_parampathinfo(root, rel,
required_outer);
pathnode->parallel_aware = false;
+ pathnode->parallel_safe = rel->consider_parallel;
+ pathnode->parallel_degree = 0;
pathnode->pathkeys = pathkeys;
cost_functionscan(pathnode, root, rel, pathnode->param_info);
pathnode->param_info = get_baserel_parampathinfo(root, rel,
required_outer);
pathnode->parallel_aware = false;
+ pathnode->parallel_safe = rel->consider_parallel;
+ pathnode->parallel_degree = 0;
pathnode->pathkeys = NIL; /* result is always unordered */
cost_valuesscan(pathnode, root, rel, pathnode->param_info);
pathnode->param_info = get_baserel_parampathinfo(root, rel,
required_outer);
pathnode->parallel_aware = false;
+ pathnode->parallel_safe = rel->consider_parallel;
+ pathnode->parallel_degree = 0;
pathnode->pathkeys = NIL; /* XXX for now, result is always unordered */
cost_ctescan(pathnode, root, rel, pathnode->param_info);
pathnode->param_info = get_baserel_parampathinfo(root, rel,
required_outer);
pathnode->parallel_aware = false;
+ pathnode->parallel_safe = rel->consider_parallel;
+ pathnode->parallel_degree = 0;
pathnode->pathkeys = NIL; /* result is always unordered */
/* Cost is the same as for a regular CTE scan */
pathnode->path.param_info = get_baserel_parampathinfo(root, rel,
required_outer);
pathnode->path.parallel_aware = false;
+ pathnode->path.parallel_safe = rel->consider_parallel;
+ pathnode->path.parallel_degree = 0;
pathnode->path.rows = rows;
pathnode->path.startup_cost = startup_cost;
pathnode->path.total_cost = total_cost;
required_outer,
&restrict_clauses);
pathnode->path.parallel_aware = false;
+ pathnode->path.parallel_safe = joinrel->consider_parallel;
+ /* This is a foolish way to estimate parallel_degree, but for now... */
+ pathnode->path.parallel_degree = outer_path->parallel_degree;
pathnode->path.pathkeys = pathkeys;
pathnode->jointype = jointype;
pathnode->outerjoinpath = outer_path;
required_outer,
&restrict_clauses);
pathnode->jpath.path.parallel_aware = false;
+ pathnode->jpath.path.parallel_safe = joinrel->consider_parallel;
+ pathnode->jpath.path.parallel_degree = 0;
pathnode->jpath.path.pathkeys = pathkeys;
pathnode->jpath.jointype = jointype;
pathnode->jpath.outerjoinpath = outer_path;
required_outer,
&restrict_clauses);
pathnode->jpath.path.parallel_aware = false;
+ pathnode->jpath.path.parallel_safe = joinrel->consider_parallel;
+ /* This is a foolish way to estimate parallel_degree, but for now... */
+ pathnode->jpath.path.parallel_degree = outer_path->parallel_degree;
/*
* A hashjoin never has pathkeys, since its output ordering is
rel->reltargetlist = NIL;
rel->pathlist = NIL;
rel->ppilist = NIL;
+ rel->partial_pathlist = NIL;
rel->cheapest_startup_path = NULL;
rel->cheapest_total_path = NULL;
rel->cheapest_unique_path = NULL;
joinrel->reltargetlist = NIL;
joinrel->pathlist = NIL;
joinrel->ppilist = NIL;
+ joinrel->partial_pathlist = NIL;
joinrel->cheapest_startup_path = NULL;
joinrel->cheapest_total_path = NULL;
joinrel->cheapest_unique_path = NULL;
List *reltargetlist; /* Vars to be output by scan of relation */
List *pathlist; /* Path structures */
List *ppilist; /* ParamPathInfos used in pathlist */
+ List *partial_pathlist; /* partial Paths */
struct Path *cheapest_startup_path;
struct Path *cheapest_total_path;
struct Path *cheapest_unique_path;
RelOptInfo *parent; /* the relation this path can build */
ParamPathInfo *param_info; /* parameterization info, or NULL if none */
bool parallel_aware; /* engage parallel-aware logic? */
+ bool parallel_safe; /* OK to use as part of parallel plan? */
+ int parallel_degree; /* desired parallel degree; 0 = not parallel */
/* estimated size/costs for path (see costsize.c for more info) */
double rows; /* estimated number of result tuples */
{
Path path;
Path *subpath; /* path for each worker */
- int num_workers; /* number of workers sought to help */
bool single_copy; /* path must not be executed >1x */
} GatherPath;
extern double index_pages_fetched(double tuples_fetched, BlockNumber pages,
double index_pages, PlannerInfo *root);
extern void cost_seqscan(Path *path, PlannerInfo *root, RelOptInfo *baserel,
- ParamPathInfo *param_info, int nworkers);
+ ParamPathInfo *param_info);
extern void cost_samplescan(Path *path, PlannerInfo *root, RelOptInfo *baserel,
ParamPathInfo *param_info);
extern void cost_index(IndexPath *path, PlannerInfo *root,
extern bool add_path_precheck(RelOptInfo *parent_rel,
Cost startup_cost, Cost total_cost,
List *pathkeys, Relids required_outer);
+extern void add_partial_path(RelOptInfo *parent_rel, Path *new_path);
+extern bool add_partial_path_precheck(RelOptInfo *parent_rel,
+ Cost total_cost, List *pathkeys);
extern Path *create_seqscan_path(PlannerInfo *root, RelOptInfo *rel,
- Relids required_outer, int nworkers);
+ Relids required_outer, int parallel_degree);
extern Path *create_samplescan_path(PlannerInfo *root, RelOptInfo *rel,
Relids required_outer);
extern IndexPath *create_index_path(PlannerInfo *root,
extern TidPath *create_tidscan_path(PlannerInfo *root, RelOptInfo *rel,
List *tidquals, Relids required_outer);
extern AppendPath *create_append_path(RelOptInfo *rel, List *subpaths,
- Relids required_outer);
+ Relids required_outer, int parallel_degree);
extern MergeAppendPath *create_merge_append_path(PlannerInfo *root,
RelOptInfo *rel,
List *subpaths,
List *pathkeys,
Relids required_outer);
-extern ResultPath *create_result_path(List *quals);
+extern ResultPath *create_result_path(RelOptInfo *rel, List *quals);
extern MaterialPath *create_material_path(RelOptInfo *rel, Path *subpath);
extern UniquePath *create_unique_path(PlannerInfo *root, RelOptInfo *rel,
Path *subpath, SpecialJoinInfo *sjinfo);
extern GatherPath *create_gather_path(PlannerInfo *root,
- RelOptInfo *rel, Path *subpath, Relids required_outer,
- int nworkers);
+ RelOptInfo *rel, Path *subpath, Relids required_outer);
extern Path *create_subqueryscan_path(PlannerInfo *root, RelOptInfo *rel,
List *pathkeys, Relids required_outer);
extern Path *create_functionscan_path(PlannerInfo *root, RelOptInfo *rel,
extern RelOptInfo *standard_join_search(PlannerInfo *root, int levels_needed,
List *initial_rels);
+extern void generate_gather_paths(PlannerInfo *root, RelOptInfo *rel);
+
#ifdef OPTIMIZER_DEBUG
extern void debug_print_rel(PlannerInfo *root, RelOptInfo *rel);
#endif
projects / users / rhaas / postgres.git / commitdiff