There are different options to mount and install your Nest Cam Outdoor (wired, 2nd gen). You can run the power cable to an outdoor outlet or to an outlet inside your home through an existing vent or hole. You can also drill one yourself.
Tip: If you want to install the Nest Cam in an area that doesn’t have a power connection, you’ll need a junction box installed. If you don’t feel comfortable and need help drilling through an exterior wall, contact a pro.
Gather the tools you need
The box includes:
- Nest Cam Outdoor
- Magnetic wall mount
- Weather-resistant power adapter
- 8 wall screws
- 8 anchors
- 6 cable clips
To install the wall mount and cable clips, you’ll also need a:
- #2 Philips screwdriver
- Step ladder, if necessary
- Power drill and drill bit:
- Wood or drywall: 3/32 in (3 mm)
- Stone, masonry, or stucco: ¼ in (6 mm)
- Level
Watch the installation video
How to set up and install Google Nest Cam Outdoor (wired, 2nd gen)
Set up your Nest Cam
- Set up your camera with the Home app. When the app asks which product you want to add, make sure that you select Google Nest Cam Outdoor (wired, 2nd gen).
- Make sure that you review and comply with all safety guidelines. Locate where all in-wall pipes and electrical wires are before drilling.
- Leave the lens sticker on until you’re finished with your Nest Cam installation. This helps to keep the lens protected from dust and smudges. Be sure to remove it when you’re done with installation.
- Plan the cable route starting from your indoor outlet to where you’ll install your camera.
- Find a good location outside. Here are some tips to help you decide:
- Hold your camera up where you want to install it, and access the video stream with the Nest app to check the Wi-Fi coverage.
- If the camera can’t connect to Wi-Fi, or if the video stream is interrupted, you might need to pick another location where the signal is stronger.
Learn how to fix Nest camera or doorbell Wi-Fi connection issues.
Tip: If you need to install your camera beyond the range of your existing network, you can try using a Wi-Fi extender.
Mount your Nest Cam
Once your tools are ready, and have decided where to install the camera, you can now mount it. The Nest Cam Outdoor magnetically attaches to the wall mount, which allows you to install it on brick, wood, or other non-metal surfaces.
The metal wall plate is attached to the magnetic wall mount. To remove it:
- Hold the top of the wall mount with one hand.
- Press the palm of the other hand against the bottom of the base.
- Twist 30° counter clockwise.
Important: Before you drill a hole through your wall, make sure to check the safety and privacy tips.
- Hold the plate up where you want to install your camera.
- Mark the position of the holes and remove the plate.
- Drill pilot holes.
- If the wall is made of wood or drywall, use a 7/64” bit.
- If the wall is made of a material like brick or stone, you may need to use the included wall anchors. Use a 7/32” masonry bit to drill holes for the anchors.
- If the wall is made of wood or drywall, hold the plate up to the wall and insert the screws.
- If the wall is made of a material like brick or stone:
- Gently tap each anchor into the wall with a hammer until it’s flush with the surface.
- Hold the plate against the wall.
- Insert the screws into the anchors.
To plug in the weatherproof power cable and adapter:
|
For indoor outlet |
For outdoor outlet |
|
Depending on your cable route, you can run the cable through:
|
Use the included cable clips and wall anchors to secure the cable to the wall. Leave a bit of slack so you can adjust the camera once it’s connected.
Tip: To have a cleaner installation, route the cable along a ledge or hidden area and paint it to blend in with your house.
- Twist the magnetic plate clockwise and attach it to the wall plate.
- Attach the camera to the magnetic plate.
Tip: Make sure the camera is upright and the charge cable connection and speaker are at the bottom of the camera. When you mount the camera upright, it ensures that its motion sensor is pointed in the right direction.
Important safety & privacy tips
Make sure you’re following local housing safety regulations. Before you drill a hole through the wall, the placement of the hole shouldn’t interfere with your home’s wiring or plumbing. If you’re not sure, contact an electrician or a plumber.
For more information, go to Safety and privacy guidelines.