diff options
77 files changed, 2507 insertions, 358 deletions
diff --git a/cmake/QtBuildRepoHelpers.cmake b/cmake/QtBuildRepoHelpers.cmake index 1429448c2f8..5961424c38b 100644 --- a/cmake/QtBuildRepoHelpers.cmake +++ b/cmake/QtBuildRepoHelpers.cmake @@ -724,6 +724,41 @@ macro(qt_internal_find_standalone_test_config_file) endif() endmacro() +# Used inside the standalone parts config file to find all requested Qt module packages. +# standalone_parts_args_var_name should be the var name in the outer scope that contains +# all the arguments for this function. +macro(qt_internal_find_standalone_parts_qt_packages standalone_parts_args_var_name) + set(__standalone_parts_opt_args "") + set(__standalone_parts_single_args "") + set(__standalone_parts_multi_args + QT_MODULE_PACKAGES + ) + cmake_parse_arguments(__standalone_parts + "${__standalone_parts_opt_args}" + "${__standalone_parts_single_args}" + "${__standalone_parts_multi_args}" + ${${standalone_parts_args_var_name}}) + + # Packages looked up in standalone tests Config files should use the same version as + # the one recorded on the Platform target. + qt_internal_get_package_version_of_target(Platform __standalone_parts_main_qt_package_version) + + if(__standalone_parts_QT_MODULE_PACKAGES) + foreach(__standalone_parts_package_name IN LISTS __standalone_parts_QT_MODULE_PACKAGES) + find_package(${QT_CMAKE_EXPORT_NAMESPACE} + "${__standalone_parts_main_qt_package_version}" + COMPONENTS "${__standalone_parts_package_name}") + endforeach() + endif() + + unset(__standalone_parts_opt_args) + unset(__standalone_parts_single_args) + unset(__standalone_parts_multi_args) + unset(__standalone_parts_QT_MODULE_PACKAGES) + unset(__standalone_parts_main_qt_package_version) + unset(__standalone_parts_package_name) +endmacro() + # Used by standalone tests and standalone non-ExternalProject examples to find all installed qt # packages. macro(qt_internal_find_standalone_parts_config_files) diff --git a/cmake/QtFeature.cmake b/cmake/QtFeature.cmake index c4564cfb38d..9bbf6e700b4 100644 --- a/cmake/QtFeature.cmake +++ b/cmake/QtFeature.cmake @@ -1302,7 +1302,10 @@ function(qt_feature_module_end) # Before, we didn't use to export the properties at all for INTERFACE_ libraries, # but we need to, because certain GlobalPrivate modules have features which are used # in configure-time conditions for tests. - qt_internal_add_genex_properties_export("${target}" ${properties_to_export}) + qt_internal_add_custom_properties_to_export("${target}" + PROPERTIES_WITHOUT_GENEXES + ${properties_to_export} + ) else() set(propertyPrefix "") set_property(TARGET "${target}" diff --git a/cmake/QtPostProcessHelpers.cmake b/cmake/QtPostProcessHelpers.cmake index 12f5c617960..b8e46085a98 100644 --- a/cmake/QtPostProcessHelpers.cmake +++ b/cmake/QtPostProcessHelpers.cmake @@ -819,7 +819,7 @@ function(qt_internal_create_config_file_for_standalone_tests) # standalone tests, and it can happen that Core or Gui features are not # imported early enough, which means FindWrapPNG will try to find a system PNG library instead # of the bundled one. - set(modules) + set(modules "") foreach(m ${QT_REPO_KNOWN_MODULES}) get_target_property(target_type "${m}" TYPE) @@ -835,12 +835,9 @@ function(qt_internal_create_config_file_for_standalone_tests) endif() endforeach() - list(JOIN modules " " QT_REPO_KNOWN_MODULES_STRING) - string(STRIP "${QT_REPO_KNOWN_MODULES_STRING}" QT_REPO_KNOWN_MODULES_STRING) - # Skip generating and installing file if no modules were built. This make sure not to install # anything when build qtx11extras on macOS for example. - if(NOT QT_REPO_KNOWN_MODULES_STRING) + if(NOT modules) return() endif() @@ -848,8 +845,8 @@ function(qt_internal_create_config_file_for_standalone_tests) # of the current repo. This is used for standalone tests. qt_internal_get_standalone_parts_config_file_name(tests_config_file_name) - # Standalone tests Config files should follow the main versioning scheme. - qt_internal_get_package_version_of_target(Platform main_qt_package_version) + # Substitution variables. + list(JOIN modules "\n " QT_MODULE_PACKAGES) configure_file( "${QT_CMAKE_DIR}/QtStandaloneTestsConfig.cmake.in" diff --git a/cmake/QtStandaloneTestsConfig.cmake.in b/cmake/QtStandaloneTestsConfig.cmake.in index 39200167a58..9d548d14699 100644 --- a/cmake/QtStandaloneTestsConfig.cmake.in +++ b/cmake/QtStandaloneTestsConfig.cmake.in @@ -1,8 +1,8 @@ # Copyright (C) 2024 The Qt Company Ltd. # SPDX-License-Identifier: BSD-3-Clause -# TODO: Ideally this should look for each Qt module separately, with each module's specific version, -# bypassing the Qt6 Config file, aka find_package(Qt6SpecificFoo) repated x times. But it's not -# critical. -find_package(@INSTALL_CMAKE_NAMESPACE@ @main_qt_package_version@ - COMPONENTS @QT_REPO_KNOWN_MODULES_STRING@) +set(__standalone_parts_qt_packages_args + QT_MODULE_PACKAGES + @QT_MODULE_PACKAGES@ +) +qt_internal_find_standalone_parts_qt_packages(__standalone_parts_qt_packages_args) diff --git a/cmake/QtTargetHelpers.cmake b/cmake/QtTargetHelpers.cmake index eedfdbeba74..397628ba11a 100644 --- a/cmake/QtTargetHelpers.cmake +++ b/cmake/QtTargetHelpers.cmake @@ -1688,15 +1688,35 @@ function(qt_internal_get_target_sources_property out_var) set(${out_var} "${${out_var}}" PARENT_SCOPE) endfunction() -# This function collects target properties that contain generator expressions and needs to be -# exported. This function is needed since the CMake EXPORT_PROPERTIES property doesn't support -# properties that contain generator expressions. -# Usage: qt_internal_add_genex_properties_export(target properties...) -function(qt_internal_add_genex_properties_export target) +# This function collects target properties that need to be exported without using CMake's +# EXPORT_PROPERTIES. +# Use cases: +# - Properties named INTERFACE_foo (which CMake doesn't allow exporting) +# - Properties that contain generator expressions (need special handling for multi-config builds) +# Usage: +# qt_internal_add_custom_properties_to_export(target +# PROPERTIES property1 [property2 ...] +# PROPERTIES_WITHOUT_GENEXES property3 [property4 ...] +# ) +# Arguments: +# PROPERTIES +# should contain names of properties that can differ in multi-config builds (e.g. paths) +# PROPERTIES_WITHOUT_GENEXES +# should contain names of properties that will always have the same value in multi config +# builds (e.g, feature values). +function(qt_internal_add_custom_properties_to_export target) + set(opt_args "") + set(single_args "") + set(multi_args + PROPERTIES + PROPERTIES_WITHOUT_GENEXES + ) + cmake_parse_arguments(PARSE_ARGV 1 arg "${opt_args}" "${single_args}" "${multi_args}") + _qt_internal_validate_all_args_are_parsed(arg) + get_cmake_property(is_multi_config GENERATOR_IS_MULTI_CONFIG) - set(config_check_begin "") - set(config_check_end "") + # Prepare multi-config helper genexes. if(is_multi_config) list(GET CMAKE_CONFIGURATION_TYPES 0 first_config_type) @@ -1704,7 +1724,7 @@ function(qt_internal_add_genex_properties_export target) # The check is only applicable to the 'main' configuration. If user project doesn't use # multi-config generator, then the check supposed to return true and the value from the # 'main' configuration supposed to be used. - string(JOIN "" check_if_config_empty + string(CONCAT check_if_config_empty "$<1:$><NOT:" "$<1:$><BOOL:" "$<1:$><CONFIG$<ANGLE-R>" @@ -1714,7 +1734,7 @@ function(qt_internal_add_genex_properties_export target) # The genex snippet is evaluated to '$<CONFIG:'Qt config type'>' in the generated cmake # file and checks if the config that user uses matches the generated cmake file config. - string(JOIN "" check_user_config + string(CONCAT check_user_config "$<1:$><CONFIG:$<CONFIG>$<ANGLE-R>" ) @@ -1725,34 +1745,70 @@ function(qt_internal_add_genex_properties_export target) # user project according to the user config type. # All genexes need to be escaped properly to protect them from evaluation by the # file(GENERATE call in the qt_internal_export_genex_properties function. - string(JOIN "" config_check_begin + string(CONCAT config_check_begin_multi "$<1:$><" "$<1:$><OR:" "${check_user_config}" "$<$<CONFIG:${first_config_type}>:$<COMMA>${check_if_config_empty}>" "$<ANGLE-R>:" ) - set(config_check_end "$<ANGLE-R>") + set(config_check_end_multi "$<ANGLE-R>") endif() set(target_name "${QT_CMAKE_EXPORT_NAMESPACE}::${target}") - foreach(property IN LISTS ARGN) - set(target_property_genex "$<TARGET_PROPERTY:${target_name},${property}>") - # All properties that contain lists need to be protected of processing by JOIN genex calls. - # So this escapes the semicolons for these list. - set(target_property_list_escape - "$<JOIN:$<GENEX_EVAL:${target_property_genex}>,\;>") - set(property_value - "\"${config_check_begin}${target_property_list_escape}${config_check_end}\"") - set_property(TARGET ${target} APPEND PROPERTY _qt_export_genex_properties_content - "${property} ${property_value}") + + set(property_sources + PROPERTIES + PROPERTIES_WITHOUT_GENEXES + ) + + foreach(property_source IN LISTS property_sources) + if(property_source STREQUAL "PROPERTIES") + # Properties with genexes need multi-config specific handling. + set(config_check_begin "${config_check_begin_multi}") + set(config_check_end "${config_check_end_multi}") + + set(output_property "_qt_export_custom_properties_content") + elseif(property_source STREQUAL "PROPERTIES_WITHOUT_GENEXES") + # Properties without genexes don't need the config checks. + set(config_check_begin "") + set(config_check_end "") + + set(output_property "_qt_export_custom_properties_no_genexes_content") + else() + message(FATAL_ERROR "Invalid type of property source" ${property_source}"") + endif() + + foreach(property IN LISTS arg_${property_source}) + set(target_property_genex "$<TARGET_PROPERTY:${target_name},${property}>") + # All properties that contain lists need to be protected of processing by JOIN genex + # calls. So this escapes the semicolons for these list. + set(target_property_list_escape + "$<JOIN:$<GENEX_EVAL:${target_property_genex}>,\;>") + set(property_value + "\"${config_check_begin}${target_property_list_escape}${config_check_end}\"") + set_property(TARGET ${target} APPEND PROPERTY "${output_property}" + "${property} ${property_value}") + endforeach() endforeach() endfunction() -# This function executes generator expressions for the properties that are added by the -# qt_internal_add_genex_properties_export function and sets the calculated values to the -# corresponding properties in the generated ExtraProperties.cmake file. The file then needs to be -# included after the target creation routines in Config.cmake files. It also supports Multi-Config -# builds. +# This function generates and installs ${EXPORT_NAME_PREFIX}ExportProperties-$<CONFIG>.cmake files +# to be included from inside a FooConfig.cmake file. +# +# The file contains set_property(TARGET PROPERTY) assignments that append values to a given target's +# properties as added by the qt_internal_add_custom_properties_to_export function. +# +# The assigned values are computed from the result of executing the generator expressions that were +# stored in the properties, and are wrapped in config-specific genexes in a multi-config build. +# +# Example output: +# set_property(TARGET Qt6::Foo PROPERTY MY_GENEX_PROP +# "$<$<OR:$<CONFIG:RelWithDebInfo>,$<NOT:$<BOOL:$<CONFIG>>>>:OneReleaseVal>") +# set_property(TARGET Qt6::Foo PROPERTY MY_REGULAR_PROP "SecondValue") +# include("${CMAKE_CURRENT_LIST_DIR}/Qt6FooExtraProperties-Debug.cmake") +# inside the include +# set_property(TARGET Qt6::Foo APPEND PROPERTY MY_GENEX_PROP "$<$<OR:$<CONFIG:Debug>>:OneDebugVal>") +# # Arguments: # EXPORT_NAME_PREFIX: # The portion of the file name before ExtraProperties.cmake @@ -1761,13 +1817,15 @@ endfunction() # TARGETS: # The internal target names. function(qt_internal_export_genex_properties) - set(option_args "") + set(opt_args "") set(single_args EXPORT_NAME_PREFIX CONFIG_INSTALL_DIR ) - set(multi_args TARGETS) - cmake_parse_arguments(arg "${option_args}" "${single_args}" "${multi_args}" ${ARGN}) + set(multi_args + TARGETS + ) + cmake_parse_arguments(PARSE_ARGV 0 arg "${opt_args}" "${single_args}" "${multi_args}") if(NOT arg_EXPORT_NAME_PREFIX) message(FATAL_ERROR "qt_internal_export_genex_properties: " @@ -1779,24 +1837,36 @@ function(qt_internal_export_genex_properties) "TARGETS argument must contain at least one target") endif() - foreach(target IN LISTS arg_TARGETS) - get_cmake_property(is_multi_config GENERATOR_IS_MULTI_CONFIG) + # TODO: Handling more than one target won't work correctly atm due to trying to create and + # install the same file name multiple times for each target. + list(LENGTH arg_TARGETS targets_count) + if(targets_count GREATER 1) + message(AUTHOR_WARNING "qt_internal_export_genex_properties: " + "Specifying more than one target is not fully supported yet.") + endif() + get_cmake_property(is_multi_config GENERATOR_IS_MULTI_CONFIG) + + set(should_append "") + set(config_suffix "") + set(is_first_config "1") + if(is_multi_config) + list(GET CMAKE_CONFIGURATION_TYPES 0 first_config_type) + + # The non-genex properties should only go to the first config file. + set(is_first_config "$<CONFIG:${first_config_type}>") + + set(config_suffix "$<$<NOT:${is_first_config}>:-$<CONFIG>>") + # If the generated file belongs to the 'main' config type, we should set property + # but not append it. + string(JOIN "" should_append + "$<$<NOT:${is_first_config}>: APPEND>") + endif() + + foreach(target IN LISTS arg_TARGETS) set(output_file_base_name "${arg_EXPORT_NAME_PREFIX}ExtraProperties") - set(should_append "") - set(config_suffix "") - if(is_multi_config) - list(GET CMAKE_CONFIGURATION_TYPES 0 first_config_type) - set(config_suffix "$<$<NOT:$<CONFIG:${first_config_type}>>:-$<CONFIG>>") - # If the generated file belongs to the 'main' config type, we should set property - # but not append it. - string(JOIN "" should_append - "$<$<NOT:$<CONFIG:${first_config_type}>>: APPEND>") - endif() set(file_name "${output_file_base_name}${config_suffix}.cmake") - - qt_path_join(output_file "${arg_CONFIG_INSTALL_DIR}" - "${file_name}") + qt_path_join(output_file "${arg_CONFIG_INSTALL_DIR}" "${file_name}") if(NOT IS_ABSOLUTE "${output_file}") qt_path_join(output_file "${QT_BUILD_DIR}" "${output_file}") @@ -1804,17 +1874,51 @@ function(qt_internal_export_genex_properties) set(target_name "${QT_CMAKE_EXPORT_NAMESPACE}::${target}") + # Common genex helpers. string(JOIN "" set_property_begin "set_property(TARGET " "${target_name}${should_append} PROPERTY " ) set(set_property_end ")") set(set_property_glue "${set_property_end}\n${set_property_begin}") + set(t_prop "TARGET_PROPERTY:${target}") + + # Handle the properties that contain genexes. set(property_list - "$<GENEX_EVAL:$<TARGET_PROPERTY:${target},_qt_export_genex_properties_content>>") - string(JOIN "" set_property_content "${set_property_begin}" + "$<GENEX_EVAL:$<${t_prop},_qt_export_custom_properties_content>>") + set(property_has_values "$<BOOL:${property_list}>") + string(CONCAT set_property_content + "${set_property_begin}" "$<JOIN:${property_list},${set_property_glue}>" "${set_property_end}") + string(CONCAT set_property_content_conditional + "$<${property_has_values}:" + "\n${set_property_content}" + ">") + + # We need to ensure the no genexes content only gets added to the first config file. + set(property_no_genexes_list + "$<GENEX_EVAL:$<${t_prop},_qt_export_custom_properties_no_genexes_content>>") + set(property_no_genexes_has_values "$<BOOL:${property_no_genexes_list}>") + string(CONCAT property_no_genexes_has_values_and_first_config + "$<AND:${property_no_genexes_has_values},${is_first_config}>") + + string(CONCAT set_property_no_genexes_content + "${set_property_begin}" + "$<JOIN:${property_no_genexes_list},${set_property_glue}>" + "${set_property_end}") + + string(CONCAT set_property_no_genexes_content_conditional + "$<${property_no_genexes_has_values_and_first_config}:" + "\n${set_property_no_genexes_content}" + ">") + + # Final content is generated if at least one genex-carrying property has a value, + # or if we are in the first config and at least one no-genex property has a value. + set(content_available_condition + "$<OR:${property_has_values},${property_no_genexes_has_values_and_first_config}>") + + set(config_includes_string "") if(is_multi_config) set(config_includes "") foreach(config IN LISTS CMAKE_CONFIGURATION_TYPES) @@ -1827,19 +1931,33 @@ function(qt_internal_export_genex_properties) endforeach() list(JOIN config_includes "\n" config_includes_string) set(config_includes_string - "\n$<$<CONFIG:${first_config_type}>:${config_includes_string}>") + "\n$<${is_first_config}:${config_includes_string}>") + + # Config includes should be included if we have properties with genexes, which are + # config specific. + string(CONCAT config_includes_string_conditional + "$<${property_has_values}:" + "${config_includes_string}" + ">") endif() + string(CONCAT final_content + "$<${content_available_condition}:" + "${set_property_content_conditional}" + "${set_property_no_genexes_content_conditional}" + "${config_includes_string_conditional}" + ">") + file(GENERATE OUTPUT "${output_file}" - CONTENT "$<$<BOOL:${property_list}>:${set_property_content}${config_includes_string}>" - CONDITION "$<BOOL:${property_list}>" + CONTENT "${final_content}" + CONDITION "${content_available_condition}" ) - endforeach() - qt_install(FILES "$<$<BOOL:${property_list}>:${output_file}>" - DESTINATION "${arg_CONFIG_INSTALL_DIR}" - COMPONENT Devel - ) + qt_install(FILES "$<${content_available_condition}:${output_file}>" + DESTINATION "${arg_CONFIG_INSTALL_DIR}" + COMPONENT Devel + ) + endforeach() endfunction() # A small wrapper for adding the Platform target, and a building block for the PlatformXInternal diff --git a/doc/global/html-header-offline.qdocconf b/doc/global/html-header-offline.qdocconf index ffce22eeeec..97e13313785 100644 --- a/doc/global/html-header-offline.qdocconf +++ b/doc/global/html-header-offline.qdocconf @@ -1,14 +1,16 @@ #Default HTML header for QDoc builds. -#specify the CSS file used by this template -HTML.stylesheets = template/style/offline.css \ - template/style/offline-dark.css \ - template/style/tech_preview.svg - -#for including files into the qch file -qhp.extraFiles += style/offline.css \ - style/offline-dark.css \ - style/tech_preview.svg +# CSS used by this template (copied to <outputdir>/style) +HTML.stylesheets += \ + template/style/offline.css \ + template/style/offline-dark.css \ + template/style/tech_preview.svg + +# Files (relative to the output directory) to include into the qch file +qhp.extraFiles += \ + style/offline.css \ + style/offline-dark.css \ + style/tech_preview.svg HTML.headerstyles = \ " <link rel=\"stylesheet\" type=\"text/css\" href=\"style/offline.css\" />\n" diff --git a/doc/global/qt-html-templates-offline.qdocconf b/doc/global/qt-html-templates-offline.qdocconf index 00fc58ba666..7cc8651bd33 100644 --- a/doc/global/qt-html-templates-offline.qdocconf +++ b/doc/global/qt-html-templates-offline.qdocconf @@ -8,34 +8,25 @@ defines += offlinedocs #uncomment if navigation bar is not wanted #HTML.nonavigationbar = "true" -HTML.stylesheets = template/style/offline.css \ - template/style/offline-dark.css -HTML.extraimages += template/images/ico_out.png \ - template/images/btn_prev.png \ - template/images/btn_next.png \ - template/images/bullet_dn.png \ - template/images/bullet_sq.png \ - template/images/bgrContent.png +# Images used only in CSS or macros that are copied to <outputdir>/images +{HTML.extraimages,DocBook.extraimages} += \ + template/images/ico_out.png \ + template/images/btn_prev.png \ + template/images/btn_next.png \ + template/images/bullet_dn.png \ + template/images/bullet_sq.png \ + template/images/bgrContent.png -sourcedirs += includes - -#specify which files in the output directory should be packed into the qch file. -qhp.extraFiles += style/offline.css \ - style/offline-dark.css \ - images/ico_out.png \ - images/btn_prev.png \ - images/btn_next.png \ - images/bullet_dn.png \ - images/bullet_sq.png \ - images/bgrContent.png +# Files (relative to the output directory) to include into the qch file +qhp.extraFiles += \ + images/ico_out.png \ + images/btn_prev.png \ + images/btn_next.png \ + images/bullet_dn.png \ + images/bullet_sq.png \ + images/bgrContent.png -DocBook.extraimages += \ - images/ico_out.png \ - images/btn_prev.png \ - images/btn_next.png \ - images/bullet_dn.png \ - images/bullet_sq.png \ - images/bgrContent.png +sourcedirs += includes # By default, include override definitions for a simplified template/CSS, # suited for rendering HTML with QTextBrowser. Comment out this line to diff --git a/examples/corelib/bindableproperties/doc/src/bindableproperties.qdoc b/examples/corelib/bindableproperties/doc/src/bindableproperties.qdoc index 476522b0865..c8e1ad84b26 100644 --- a/examples/corelib/bindableproperties/doc/src/bindableproperties.qdoc +++ b/examples/corelib/bindableproperties/doc/src/bindableproperties.qdoc @@ -4,6 +4,7 @@ /*! \example bindableproperties \examplecategory {Data Processing & I/O} + \ingroup corelib_examples \title Bindable Properties \brief Demonstrates how the usage of bindable properties can simplify your C++ code. diff --git a/examples/corelib/ipc/doc/src/localfortuneclient.qdoc b/examples/corelib/ipc/doc/src/localfortuneclient.qdoc index a2bdb69b8b0..ace3f18ce8a 100644 --- a/examples/corelib/ipc/doc/src/localfortuneclient.qdoc +++ b/examples/corelib/ipc/doc/src/localfortuneclient.qdoc @@ -6,6 +6,7 @@ \examplecategory {Connectivity} \title Local Fortune Client \ingroup examples-ipc + \ingroup corelib_examples \brief Demonstrates using QLocalSocket for a simple local service client. The Local Fortune Client example shows how to create a client for a simple diff --git a/examples/corelib/ipc/doc/src/localfortuneserver.qdoc b/examples/corelib/ipc/doc/src/localfortuneserver.qdoc index 6b359a86805..593d505bdf3 100644 --- a/examples/corelib/ipc/doc/src/localfortuneserver.qdoc +++ b/examples/corelib/ipc/doc/src/localfortuneserver.qdoc @@ -6,6 +6,7 @@ \examplecategory {Connectivity} \title Local Fortune Server \ingroup examples-ipc + \ingroup corelib_examples \brief Demonstrates using QLocalServer and QLocalSocket for serving a simple local service. The Local Fortune Server example shows how to create a server for a simple diff --git a/examples/corelib/ipc/doc/src/sharedmemory.qdoc b/examples/corelib/ipc/doc/src/sharedmemory.qdoc index 80645f34954..62f9cbcca78 100644 --- a/examples/corelib/ipc/doc/src/sharedmemory.qdoc +++ b/examples/corelib/ipc/doc/src/sharedmemory.qdoc @@ -6,6 +6,7 @@ \examplecategory {Data Processing & I/O} \title IPC: Shared Memory \ingroup examples-ipc + \ingroup corelib_examples \brief Demonstrates how to share image data between different processes using the Shared Memory IPC mechanism. diff --git a/examples/corelib/mimetypes/doc/src/mimetypebrowser.qdoc b/examples/corelib/mimetypes/doc/src/mimetypebrowser.qdoc index cc76abe2e57..9b496647c5e 100644 --- a/examples/corelib/mimetypes/doc/src/mimetypebrowser.qdoc +++ b/examples/corelib/mimetypes/doc/src/mimetypebrowser.qdoc @@ -5,6 +5,7 @@ \example mimetypes/mimetypebrowser \examplecategory {Data Processing & I/O} \ingroup examples-mimetype + \ingroup corelib_examples \title MIME Type Browser \brief Shows the hierarchy of MIME types and diff --git a/examples/corelib/platform/androidnotifier/doc/src/androidnotifier-example.qdoc b/examples/corelib/platform/androidnotifier/doc/src/androidnotifier-example.qdoc index e1f76d2173f..86d395a25fe 100644 --- a/examples/corelib/platform/androidnotifier/doc/src/androidnotifier-example.qdoc +++ b/examples/corelib/platform/androidnotifier/doc/src/androidnotifier-example.qdoc @@ -7,6 +7,7 @@ \meta tag {widgets,android,notification} \brief Demonstrates calling Java code from Qt in an Android application. \ingroup androidplatform + \ingroup corelib_examples \image androidnotifier.png diff --git a/examples/corelib/serialization/cbordump/doc/src/cbordump.qdoc b/examples/corelib/serialization/cbordump/doc/src/cbordump.qdoc index a4dc01116f3..bfb92c7cdc8 100644 --- a/examples/corelib/serialization/cbordump/doc/src/cbordump.qdoc +++ b/examples/corelib/serialization/cbordump/doc/src/cbordump.qdoc @@ -5,6 +5,7 @@ \example serialization/cbordump \examplecategory {Data Processing & I/O} \meta tag {network} + \ingroup corelib_examples \title Parsing and displaying CBOR data \brief A demonstration of how to parse files in CBOR format. diff --git a/examples/corelib/serialization/convert/doc/src/convert.qdoc b/examples/corelib/serialization/convert/doc/src/convert.qdoc index 187e81a85e3..67b9600d740 100644 --- a/examples/corelib/serialization/convert/doc/src/convert.qdoc +++ b/examples/corelib/serialization/convert/doc/src/convert.qdoc @@ -5,6 +5,7 @@ \example serialization/convert \examplecategory {Data Processing & I/O} \meta tag {network} + \ingroup corelib_examples \title Serialization Converter \brief How to convert between different serialization formats. diff --git a/examples/corelib/serialization/savegame/doc/src/savegame.qdoc b/examples/corelib/serialization/savegame/doc/src/savegame.qdoc index 46fca15b628..bbd047b0016 100644 --- a/examples/corelib/serialization/savegame/doc/src/savegame.qdoc +++ b/examples/corelib/serialization/savegame/doc/src/savegame.qdoc @@ -5,6 +5,7 @@ \example serialization/savegame \examplecategory {Data Processing & I/O} \title Saving and Loading a Game + \ingroup corelib_examples \brief How to save and load a game using Qt's JSON or CBOR classes. diff --git a/examples/corelib/serialization/streambookmarks/doc/src/qxmlstreambookmarks.qdoc b/examples/corelib/serialization/streambookmarks/doc/src/qxmlstreambookmarks.qdoc index 8e32dd8d0b2..6393671dcf0 100644 --- a/examples/corelib/serialization/streambookmarks/doc/src/qxmlstreambookmarks.qdoc +++ b/examples/corelib/serialization/streambookmarks/doc/src/qxmlstreambookmarks.qdoc @@ -8,6 +8,7 @@ \title QXmlStream Bookmarks Example \brief Demonstrates how to read and write XBEL files. \ingroup xml-examples + \ingroup corelib_examples The QXmlStream Bookmarks example provides a viewer for XML Bookmark Exchange Language (XBEL) files. It can read bookmarks using Qt's QXmlStreamReader and diff --git a/examples/corelib/threads/doc/src/mandelbrot.qdoc b/examples/corelib/threads/doc/src/mandelbrot.qdoc index f0daf633704..83eedfd021d 100644 --- a/examples/corelib/threads/doc/src/mandelbrot.qdoc +++ b/examples/corelib/threads/doc/src/mandelbrot.qdoc @@ -6,6 +6,7 @@ \examplecategory {Data Processing & I/O} \title Mandelbrot \ingroup qtconcurrent-mtexamples + \ingroup corelib_examples \brief The Mandelbrot example demonstrates multi-thread programming using Qt. It shows how to use a worker thread to diff --git a/examples/corelib/threads/doc/src/queuedcustomtype.qdoc b/examples/corelib/threads/doc/src/queuedcustomtype.qdoc index cafab85edcb..2d8430be9f1 100644 --- a/examples/corelib/threads/doc/src/queuedcustomtype.qdoc +++ b/examples/corelib/threads/doc/src/queuedcustomtype.qdoc @@ -6,6 +6,7 @@ \examplecategory {Data Processing & I/O} \title Queued Custom Type \ingroup qtconcurrent-mtexamples + \ingroup corelib_examples \brief The Queued Custom Type example shows how to send custom types between threads with queued signals and slots. diff --git a/examples/corelib/threads/doc/src/semaphores.qdoc b/examples/corelib/threads/doc/src/semaphores.qdoc index f5ff90b0140..7206ac8536b 100644 --- a/examples/corelib/threads/doc/src/semaphores.qdoc +++ b/examples/corelib/threads/doc/src/semaphores.qdoc @@ -6,6 +6,7 @@ \examplecategory {Data Processing & I/O} \title Producer and Consumer using Semaphores \ingroup qtconcurrent-mtexamples + \ingroup corelib_examples \brief The Producer and Consumer using Semaphores example shows how to use QSemaphore to control access to a circular buffer shared diff --git a/examples/corelib/threads/doc/src/waitconditions.qdoc b/examples/corelib/threads/doc/src/waitconditions.qdoc index d46442d0797..8f2ed596079 100644 --- a/examples/corelib/threads/doc/src/waitconditions.qdoc +++ b/examples/corelib/threads/doc/src/waitconditions.qdoc @@ -6,6 +6,7 @@ \examplecategory {Data Processing & I/O} \title Producer and Consumer using Wait Conditions \ingroup qtconcurrent-mtexamples + \ingroup corelib_examples \brief The Producer and Consumer using Wait Conditions example shows how to use QWaitCondition and QMutex to control access to a circular diff --git a/examples/corelib/time/calendarbackendplugin/doc/src/calendarbackendplugin.qdoc b/examples/corelib/time/calendarbackendplugin/doc/src/calendarbackendplugin.qdoc index b715ccd28ad..8bff32788c1 100644 --- a/examples/corelib/time/calendarbackendplugin/doc/src/calendarbackendplugin.qdoc +++ b/examples/corelib/time/calendarbackendplugin/doc/src/calendarbackendplugin.qdoc @@ -6,6 +6,7 @@ \title Calendar Backend Plugin Example \examplecategory {Data Processing & I/O} \ingroup examples-time + \ingroup corelib_examples \brief QCalendar example illustrating user-supplied custom calendars. \image calendarwindow_transition.png diff --git a/examples/corelib/tools/doc/src/contiguouscache.qdoc b/examples/corelib/tools/doc/src/contiguouscache.qdoc index 9fc572927b6..b55ca2da211 100644 --- a/examples/corelib/tools/doc/src/contiguouscache.qdoc +++ b/examples/corelib/tools/doc/src/contiguouscache.qdoc @@ -5,6 +5,7 @@ \example tools/contiguouscache \title Contiguous Cache Example \examplecategory {Data Processing & I/O} + \ingroup corelib_examples \brief The Contiguous Cache example shows how to use QContiguousCache to manage memory usage for very large models. In some environments memory is limited and, even when it diff --git a/src/corelib/CMakeLists.txt b/src/corelib/CMakeLists.txt index f31968f8199..32b70a1f288 100644 --- a/src/corelib/CMakeLists.txt +++ b/src/corelib/CMakeLists.txt @@ -701,6 +701,7 @@ qt_internal_extend_target(Core CONDITION APPLE kernel/qcore_mac.mm kernel/qcore_mac_p.h kernel/qcoreapplication_mac.cpp kernel/qeventdispatcher_cf.mm kernel/qeventdispatcher_cf_p.h + platform/darwin/qdarwinsecurityscopedfileengine.mm platform/darwin/qdarwinsecurityscopedfileengine_p.h LIBRARIES ${FWCoreFoundation} ${FWFoundation} diff --git a/src/corelib/doc/qtcore.qdocconf b/src/corelib/doc/qtcore.qdocconf index d2b386373a0..b3e4e9d30a9 100644 --- a/src/corelib/doc/qtcore.qdocconf +++ b/src/corelib/doc/qtcore.qdocconf @@ -21,7 +21,7 @@ qhp.QtCore.virtualFolder = qtcore qhp.QtCore.indexTitle = Qt Core qhp.QtCore.indexRoot = -qhp.QtCore.subprojects = manual classes +qhp.QtCore.subprojects = manual examples classes qhp.QtCore.subprojects.manual.title = Qt Core qhp.QtCore.subprojects.manual.indexTitle = Qt Core module topics qhp.QtCore.subprojects.manual.type = manual @@ -31,6 +31,11 @@ qhp.QtCore.subprojects.classes.indexTitle = Qt Core C++ Classes qhp.QtCore.subprojects.classes.selectors = class fake:headerfile qhp.QtCore.subprojects.classes.sortPages = true +qhp.QtCore.subprojects.examples.title = Examples +qhp.QtCore.subprojects.examples.indexTitle = Qt Core Examples +qhp.QtCore.subprojects.examples.selectors = example +qhp.QtCore.subprojects.examples.sortPages = true + tagfile = ../../../doc/qtcore/qtcore.tags # Make QtCore depend on all doc modules; this ensures complete inheritance diff --git a/src/corelib/doc/src/qtcore.qdoc b/src/corelib/doc/src/qtcore.qdoc index ec5fa564639..fbcd02aeea5 100644 --- a/src/corelib/doc/src/qtcore.qdoc +++ b/src/corelib/doc/src/qtcore.qdoc @@ -31,3 +31,12 @@ target_link_libraries(mytarget PRIVATE Qt6::CorePrivate) \endcode */ + +/*! + \group corelib_examples + \title Qt Core Examples + + \brief Examples for the Qt Core. + + To learn how to use features of the Qt Core module, see examples: +*/ diff --git a/src/corelib/io/qfile.cpp b/src/corelib/io/qfile.cpp index e1fc043a0ff..0184fd838aa 100644 --- a/src/corelib/io/qfile.cpp +++ b/src/corelib/io/qfile.cpp @@ -592,6 +592,10 @@ QFile::rename(const QString &newName) return false; } + // Keep engine for target alive during the operation + // FIXME: Involve the target engine in the operation + auto targetEngine = QFileSystemEngine::createLegacyEngine(newName); + // If the file exists and it is a case-changing rename ("foo" -> "Foo"), // compare Ids to make sure it really is a different file. // Note: this does not take file engines into account. @@ -738,6 +742,11 @@ QFile::link(const QString &linkName) qWarning("QFile::link: Empty or null file name"); return false; } + + // Keep engine for target alive during the operation + // FIXME: Involve the target engine in the operation + auto targetEngine = QFileSystemEngine::createLegacyEngine(linkName); + QFileInfo fi(linkName); if (d->engine()->link(fi.absoluteFilePath())) { unsetError(); @@ -771,6 +780,10 @@ bool QFilePrivate::copy(const QString &newName) Q_ASSERT(error == QFile::NoError); Q_ASSERT(!q->isOpen()); + // Keep engine for target alive during the operation + // FIXME: Involve the target engine in the operation + auto targetEngine = QFileSystemEngine::createLegacyEngine(newName); + // Some file engines can perform this copy more efficiently (e.g., Windows // calling CopyFile). if (engine()->copy(newName)) diff --git a/src/corelib/io/qfilesystemengine.cpp b/src/corelib/io/qfilesystemengine.cpp index 03da2331e05..46d4cb709e2 100644 --- a/src/corelib/io/qfilesystemengine.cpp +++ b/src/corelib/io/qfilesystemengine.cpp @@ -190,6 +190,14 @@ QFileSystemEngine::createLegacyEngine(QFileSystemEntry &entry, QFileSystemMetaDa return engine; } +std::unique_ptr<QAbstractFileEngine> +QFileSystemEngine::createLegacyEngine(const QString &fileName) +{ + QFileSystemEntry entry(fileName); + QFileSystemMetaData metaData; + return createLegacyEngine(entry, metaData); +} + //static QString QFileSystemEngine::resolveUserName(const QFileSystemEntry &entry, QFileSystemMetaData &metaData) { diff --git a/src/corelib/io/qfilesystemengine_p.h b/src/corelib/io/qfilesystemengine_p.h index ee70ccc1e1b..46eeeda569e 100644 --- a/src/corelib/io/qfilesystemengine_p.h +++ b/src/corelib/io/qfilesystemengine_p.h @@ -161,6 +161,8 @@ public: static std::unique_ptr<QAbstractFileEngine> createLegacyEngine(QFileSystemEntry &entry, QFileSystemMetaData &data); + static std::unique_ptr<QAbstractFileEngine> + createLegacyEngine(const QString &fileName); private: static QString slowCanonicalized(const QString &path); diff --git a/src/corelib/io/qfsfileengine_p.h b/src/corelib/io/qfsfileengine_p.h index 2de6cb0cb73..8ad673bf0bf 100644 --- a/src/corelib/io/qfsfileengine_p.h +++ b/src/corelib/io/qfsfileengine_p.h @@ -82,7 +82,7 @@ public: bool setFileTime(const QDateTime &newDate, QFile::FileTime time) override; QDateTime fileTime(QFile::FileTime time) const override; void setFileName(const QString &file) override; - void setFileEntry(QFileSystemEntry &&entry); + virtual void setFileEntry(QFileSystemEntry &&entry); int handle() const override; #ifndef QT_NO_FILESYSTEMITERATOR diff --git a/src/corelib/kernel/qmetacontainer.cpp b/src/corelib/kernel/qmetacontainer.cpp index 4b4ea06d8b9..6173198a972 100644 --- a/src/corelib/kernel/qmetacontainer.cpp +++ b/src/corelib/kernel/qmetacontainer.cpp @@ -210,7 +210,7 @@ void QMetaContainer::destroyIterator(const void *iterator) const */ bool QMetaContainer::compareIterator(const void *i, const void *j) const { - return hasIterator() ? d_ptr->compareIteratorFn(i, j) : false; + return i == j || (hasIterator() && d_ptr->compareIteratorFn(i, j)); } /*! @@ -249,7 +249,7 @@ void QMetaContainer::advanceIterator(void *iterator, qsizetype step) const */ qsizetype QMetaContainer::diffIterator(const void *i, const void *j) const { - return hasIterator() ? d_ptr->diffIteratorFn(i, j) : 0; + return (i != j && hasIterator()) ? d_ptr->diffIteratorFn(i, j) : 0; } /*! @@ -327,7 +327,7 @@ void QMetaContainer::destroyConstIterator(const void *iterator) const */ bool QMetaContainer::compareConstIterator(const void *i, const void *j) const { - return hasConstIterator() ? d_ptr->compareConstIteratorFn(i, j) : false; + return i == j || (hasConstIterator() && d_ptr->compareConstIteratorFn(i, j)); } /*! @@ -366,7 +366,7 @@ void QMetaContainer::advanceConstIterator(void *iterator, qsizetype step) const */ qsizetype QMetaContainer::diffConstIterator(const void *i, const void *j) const { - return hasConstIterator() ? d_ptr->diffConstIteratorFn(i, j) : 0; + return (i != j && hasConstIterator()) ? d_ptr->diffConstIteratorFn(i, j) : 0; } QT_END_NAMESPACE diff --git a/src/corelib/platform/darwin/qdarwinsecurityscopedfileengine.mm b/src/corelib/platform/darwin/qdarwinsecurityscopedfileengine.mm new file mode 100644 index 00000000000..cb38445f4fe --- /dev/null +++ b/src/corelib/platform/darwin/qdarwinsecurityscopedfileengine.mm @@ -0,0 +1,552 @@ +// Copyright (C) 2025 The Qt Company Ltd. +// SPDX-License-Identifier: LicenseRef-Qt-Commercial OR LGPL-3.0-only OR GPL-2.0-only OR GPL-3.0-only +// Qt-Security score:significant reason:default + +#include "qdarwinsecurityscopedfileengine_p.h" + +#include <QtCore/qloggingcategory.h> +#include <QtCore/qstandardpaths.h> +#include <QtCore/qreadwritelock.h> +#include <QtCore/qscopedvaluerollback.h> + +#include <QtCore/private/qcore_mac_p.h> +#include <QtCore/private/qfsfileengine_p.h> +#include <QtCore/private/qfilesystemengine_p.h> + +#include <thread> +#include <mutex> + +#include <CoreFoundation/CoreFoundation.h> +#include <Foundation/NSURL.h> + +QT_BEGIN_NAMESPACE + +using namespace Qt::StringLiterals; + +Q_STATIC_LOGGING_CATEGORY(lcSecEngine, "qt.core.io.security-scoped-fileengine", QtCriticalMsg) + +template<typename T> class BackgroundLoader; + +/* + File engine handler for security scoped file paths. + + Installs itself as soon as QtCore is loaded if the application + is sandboxed (optionally on macOS, and always on iOS and friends). +*/ +class SecurityScopedFileEngineHandler : public QAbstractFileEngineHandler +{ +public: + SecurityScopedFileEngineHandler(); + ~SecurityScopedFileEngineHandler(); + + void registerPossiblySecurityScopedURL(NSURL *url); + + std::unique_ptr<QAbstractFileEngine> create(const QString &fileName) const override; + + static BackgroundLoader<SecurityScopedFileEngineHandler>& get(); + +private: + Q_DISABLE_COPY_MOVE(SecurityScopedFileEngineHandler) + + void saveBookmark(NSURL *url); + void saveBookmarks(); + + NSURL *bookmarksFile() const; + + static NSString *cacheKeyForUrl(NSURL *url); + static NSString *cacheKeyForPath(const QString &url); + + NSMutableDictionary *m_bookmarks = nullptr; + mutable QReadWriteLock m_bookmarkLock; + + friend class SecurityScopedFileEngine; +}; + +/* + Helper class for asynchronous instantiation of types. +*/ +template<typename T> +class BackgroundLoader +{ +public: + explicit BackgroundLoader(bool shouldLoad) { + if (shouldLoad) { + m_thread = std::thread([this]() { + m_instance = std::make_unique<T>(); + }); + } + } + + ~BackgroundLoader() + { + std::scoped_lock lock(m_mutex); + if (m_thread.joinable()) + m_thread.join(); + } + + T* operator->() const + { + std::scoped_lock lock(m_mutex); + if (m_thread.joinable()) + m_thread.join(); + return m_instance.get(); + } + + explicit operator bool() const + { + std::scoped_lock lock(m_mutex); + return m_thread.joinable() || m_instance; + } + +private: + mutable std::mutex m_mutex; + mutable std::thread m_thread; + std::unique_ptr<T> m_instance; +}; + +/* + Thread-safe background-loading of optional security scoped handler, + with the ability to kick off instantiation early during program load. +*/ +BackgroundLoader<SecurityScopedFileEngineHandler>& SecurityScopedFileEngineHandler::get() +{ + using Handler = BackgroundLoader<SecurityScopedFileEngineHandler>; + static Handler handler = []() -> Handler { + if (!qt_apple_isSandboxed()) + return Handler{false}; + + qCInfo(lcSecEngine) << "Application sandbox is active. Registering security-scoped file engine."; + return Handler{true}; + }(); + return handler; +} + +static void initializeSecurityScopedFileEngineHandler() +{ + // Kick off loading of bookmarks early in the background + std::ignore = SecurityScopedFileEngineHandler::get(); +} +Q_CONSTRUCTOR_FUNCTION(initializeSecurityScopedFileEngineHandler); + +/* + Registration function for possibly security scoped URLs. + + Entry points that might provide security scoped URLs such as file + dialogs or drag-and-drop should use this function to ensure that + the security scoped file engine handler knows about the URL. +*/ +QUrl qt_apple_urlFromPossiblySecurityScopedURL(NSURL *url) +{ + if (auto &handler = SecurityScopedFileEngineHandler::get()) + handler->registerPossiblySecurityScopedURL(url); + + // Note: The URL itself doesn't encode any of the bookmark data, + // neither in the scheme or as fragments or query parameters, + // as it's all handled by the bookmark cache in the file engine. + return QUrl(QString::fromNSString(url.absoluteString) + .normalized(QString::NormalizationForm_C)); +} + +static bool checkIfResourceIsReachable(NSURL *url) +{ + NSError *error = nullptr; + if ([url checkResourceIsReachableAndReturnError:&error]) + return true; + + // Our goal is to check whether the file exists or not, and if + // not, defer creating a bookmark for it. If we get any other + // error we want to know. + if (![error.domain isEqualToString:NSCocoaErrorDomain] || error.code != NSFileReadNoSuchFileError) { + qCWarning(lcSecEngine) << "Unexpected" << error + << "when resolving reachability for" << url; + } + + return false; +} + +/* + File engine for maintaining access lifetime of security-scoped + resources on sandboxed Apple platforms. + + Note that there isn't necessarily a 1:1 relationship between + the file being operated on by the QFSFileEngine and the security + scoped resource that allows access to it, for example in the + case of a folder giving access to all files (and sub-folders) + within it. +*/ +class SecurityScopedFileEngine : public QFSFileEngine +{ + Q_DECLARE_PRIVATE(QFSFileEngine) +public: + SecurityScopedFileEngine(const QString &fileName, NSURL *securityScopedUrl) + : QFSFileEngine(fileName) + , m_securityScopedUrl([securityScopedUrl retain]) + { + startAccessingSecurityScopedResource(); + } + + ~SecurityScopedFileEngine() + { + stopAccessingSecurityScopedResource(); + [m_securityScopedUrl release]; + } + + void setFileName(const QString &fileName) override + { + QFileSystemEntry entry(fileName); + setFileEntry(std::move(entry)); + } + + void setFileEntry(QFileSystemEntry &&entry) override + { + // We can't rely on the new entry being accessible under the same + // security scope as the original path, or even that the new path + // is a security scoped resource, so stop access here, and start + // access for the new resource below if needed. + stopAccessingSecurityScopedResource(); + [m_securityScopedUrl release]; + m_securityScopedUrl = nil; + + const QString fileName = entry.filePath(); + QFSFileEngine::setFileEntry(std::move(entry)); + + // The new path may not be a security scoped resource, but if it is + // we need to establish access to it. The only way to do that is to + // actually create an engine for it, including resolving bookmarks. + auto newEngine = SecurityScopedFileEngineHandler::get()->create(fileName); + if (auto *engine = dynamic_cast<SecurityScopedFileEngine*>(newEngine.get())) { + m_securityScopedUrl = [engine->m_securityScopedUrl retain]; + startAccessingSecurityScopedResource(); + } + } + +private: + void startAccessingSecurityScopedResource() + { + if ([m_securityScopedUrl startAccessingSecurityScopedResource]) { + qCDebug(lcSecEngine) << "Started accessing" << m_securityScopedUrl.path + << "on behalf of" << fileName(DefaultName); + + m_securityScopeWasReachable = securityScopeIsReachable(); + } else { + qCWarning(lcSecEngine) << "Unexpectedly using security scoped" + << "file engine for" << m_securityScopedUrl.path + << "on behalf of" << fileName(DefaultName) + << "without needing scoped access"; + } + } + + void stopAccessingSecurityScopedResource() + { + if (!m_securityScopeWasReachable && securityScopeIsReachable()) { + // The security scoped URL didn't exist when we first started + // accessing it, but it does now, so persist a bookmark for it. + qCDebug(lcSecEngine) << "Security scoped resource has been created. Saving bookmark."; + SecurityScopedFileEngineHandler::get()->saveBookmark(m_securityScopedUrl); + } + + // Note: Stopping access is a no-op if we didn't have access + [m_securityScopedUrl stopAccessingSecurityScopedResource]; + qCDebug(lcSecEngine) << "Stopped accessing" << m_securityScopedUrl.path + << "on behalf of" << fileName(DefaultName); + } + + bool securityScopeIsReachable() const + { + return checkIfResourceIsReachable(m_securityScopedUrl); + } + + // See note above about relationship to fileName + NSURL *m_securityScopedUrl = nullptr; + bool m_securityScopeWasReachable = false; +}; + +// ---------------------------------------------------------------------- + +SecurityScopedFileEngineHandler::SecurityScopedFileEngineHandler() +{ + QMacAutoReleasePool pool; + + NSURL *savedBookmarks = bookmarksFile(); + if ([NSFileManager.defaultManager fileExistsAtPath:savedBookmarks.path]) { + NSError *error = nullptr; + m_bookmarks = [[NSDictionary dictionaryWithContentsOfURL:savedBookmarks + error:&error] mutableCopy]; + + if (error) { + qCWarning(lcSecEngine) << "Failed to load bookmarks from" + << savedBookmarks << ":" << error; + } else { + qCInfo(lcSecEngine) << "Loaded existing bookmarks for" << m_bookmarks.allKeys; + } + } + + if (!m_bookmarks) + m_bookmarks = [NSMutableDictionary new]; +} + +SecurityScopedFileEngineHandler::~SecurityScopedFileEngineHandler() +{ + [m_bookmarks release]; +} + +void SecurityScopedFileEngineHandler::registerPossiblySecurityScopedURL(NSURL *url) +{ + QMacAutoReleasePool pool; + + // Start accessing the resource, to check if it's security scoped, + // and allow us to create a bookmark for it on both macOS and iOS. + if (![url startAccessingSecurityScopedResource]) + return; // All good, not security scoped + + if (checkIfResourceIsReachable(url)) { + // We can access the resource, which means it exists, so we can + // create a persistent bookmark for it right away. We want to do + // this as soon as possible, so that if the app is terminated the + // user can continue working on the file without the app needing + // to ask for access again via a file dialog. + saveBookmark(url); + } else { + // The file isn't accessible, likely because it doesn't exist. + // As we can only create security scoped bookmarks for files + // that exist we store the URL itself for now, and save it to + // a bookmark later when we detect that the file has been created. + qCInfo(lcSecEngine) << "Resource is not reachable." + << "Registering URL" << url << "instead"; + QWriteLocker locker(&m_bookmarkLock); + m_bookmarks[cacheKeyForUrl(url)] = url; + } + + // Balance access from above + [url stopAccessingSecurityScopedResource]; + +#if defined(Q_OS_MACOS) + // On macOS, unlike iOS, URLs from file dialogs, etc, come with implicit + // access already, and we are expected to balance this access with an + // explicit stopAccessingSecurityScopedResource. We release the last + // access here to unify the behavior between macOS and iOS, and then + // leave it up to the SecurityScopedFileEngine to regain access, where + // we know the lifetime of resource use, and when to release access. + [url stopAccessingSecurityScopedResource]; +#endif +} + +std::unique_ptr<QAbstractFileEngine> SecurityScopedFileEngineHandler::create(const QString &fileName) const +{ + QMacAutoReleasePool pool; + + static thread_local bool recursionGuard = false; + if (recursionGuard) + return nullptr; + + if (fileName.isEmpty()) + return nullptr; + + QFileSystemEntry fileSystemEntry(fileName); + QFileSystemMetaData metaData; + + { + // Check if there's another engine that claims to handle the given file name. + // This covers non-QFSFileEngines like QTemporaryFileEngine, and QResourceFileEngine. + // If there isn't one, we'll get nullptr back, and know that we can access the + // file via our special QFSFileEngine. + QScopedValueRollback<bool> rollback(recursionGuard, true); + if (auto engine = QFileSystemEngine::createLegacyEngine(fileSystemEntry, metaData)) { + // Shortcut the logic of the createLegacyEngine call we're in by + // just returning this engine now. + qCDebug(lcSecEngine) << "Preferring non-QFSFileEngine engine" + << engine.get() << "for" << fileName; + return engine; + } + } + + // We're mapping the file name to existing bookmarks below, so make sure + // we use as close as we can get to the canonical path. For files that + // do not exist we fall back to the cleaned absolute path. + auto canonicalEntry = QFileSystemEngine::canonicalName(fileSystemEntry, metaData); + if (canonicalEntry.isEmpty()) + canonicalEntry = QFileSystemEngine::absoluteName(fileSystemEntry); + + if (canonicalEntry.isRelative()) { + // We try to map relative paths to absolute above, but doing so requires + // knowledge of the current working directory, which we only have if the + // working directory has already started access through other means. We + // can't explicitly start access of the working directory here, as doing + // so requires its name, which we can't get from getcwd() without access. + // Fortunately all of the entry points of security scoped URLs such as + // file dialogs or drag-and-drop give us absolute paths, and APIs like + // QDir::filePath() will construct absolute URLs without needing the + // current working directory. + qCWarning(lcSecEngine) << "Could not resolve" << fileSystemEntry.filePath() + << "against current working working directory"; + return nullptr; + } + + // Clean the path as well, to remove any trailing slashes for directories + QString filePath = QDir::cleanPath(canonicalEntry.filePath()); + + // Files inside the sandbox container can always be accessed directly + static const QString sandboxRoot = QString::fromNSString(NSHomeDirectory()); + if (filePath.startsWith(sandboxRoot)) + return nullptr; + + // The same applies to files inside the application's own bundle + static const QString bundleRoot = QString::fromNSString(NSBundle.mainBundle.bundlePath); + if (filePath.startsWith(bundleRoot)) + return nullptr; + + qCDebug(lcSecEngine) << "Looking up bookmark for" << filePath << "based on incoming fileName" << fileName; + + // Check if we have a persisted bookmark for this fileName, or + // any of its containing directories (which will give us access + // to the file). + QReadLocker locker(&m_bookmarkLock); + auto *cacheKey = cacheKeyForPath(filePath); + NSObject *bookmarkData = nullptr; + while (cacheKey.length > 1) { + bookmarkData = m_bookmarks[cacheKey]; + if (bookmarkData) + break; + cacheKey = [cacheKey stringByDeletingLastPathComponent]; + } + + // We didn't find a bookmark, so there's no point in trying to manage + // this file via a SecurityScopedFileEngine. + if (!bookmarkData) { + qCDebug(lcSecEngine) << "No bookmark found. Falling back to QFSFileEngine."; + return nullptr; + } + + NSURL *securityScopedUrl = nullptr; + if ([bookmarkData isKindOfClass:NSURL.class]) { + securityScopedUrl = static_cast<NSURL*>(bookmarkData); + } else { + NSError *error = nullptr; + BOOL bookmarkDataIsStale = NO; + securityScopedUrl = [NSURL URLByResolvingBookmarkData:static_cast<NSData*>(bookmarkData) + options: + #if defined(Q_OS_MACOS) + NSURLBookmarkResolutionWithSecurityScope + #else + // iOS bookmarks are always security scoped, and we + // don't need or want any of the other options. + NSURLBookmarkResolutionOptions(0) + #endif + relativeToURL:nil /* app-scoped bookmark */ + bookmarkDataIsStale:&bookmarkDataIsStale + error:&error]; + + if (!securityScopedUrl || error) { + qCWarning(lcSecEngine) << "Failed to resolve bookmark data for" + << fileName << ":" << error; + return nullptr; + } + + if (bookmarkDataIsStale) { + // This occurs when for example the file has been renamed, moved, + // or deleted. Normally this would be the place to update the + // bookmark to point to the new location, but Qt clients may not + // be prepared for QFiles changing their file-names under their + // feet so we treat it as a missing file. + qCDebug(lcSecEngine) << "Bookmark for" << cacheKey << "was stale"; + locker.unlock(); + QWriteLocker writeLocker(&m_bookmarkLock); + [m_bookmarks removeObjectForKey:cacheKey]; + auto *mutableThis = const_cast<SecurityScopedFileEngineHandler*>(this); + mutableThis->saveBookmarks(); + return nullptr; + } + } + + qCInfo(lcSecEngine) << "Resolved security scope" << securityScopedUrl + << "for path" << filePath; + return std::make_unique<SecurityScopedFileEngine>(fileName, securityScopedUrl); +} + +/* + Create an app-scoped bookmark, and store it in our persistent cache. + + We do this so that the user can continue accessing the file even after + application restarts. + + Storing the bookmarks to disk (inside the sandbox) is safe, as only the + app that created the app-scoped bookmarks can obtain access to the file + system resource that the URL points to. Specifically, a bookmark created + with security scope fails to resolve if the caller does not have the same + code signing identity as the caller that created the bookmark. +*/ +void SecurityScopedFileEngineHandler::saveBookmark(NSURL *url) +{ + NSError *error = nullptr; + NSData *bookmarkData = [url bookmarkDataWithOptions: + #if defined(Q_OS_MACOS) + NSURLBookmarkCreationWithSecurityScope + #else + // iOS bookmarks are always security scoped, and we + // don't need or want any of the other options. + NSURLBookmarkCreationOptions(0) + #endif + includingResourceValuesForKeys:nil + relativeToURL:nil /* app-scoped bookmark */ + error:&error]; + + if (bookmarkData) { + QWriteLocker locker(&m_bookmarkLock); + NSString *cacheKey = cacheKeyForUrl(url); + qCInfo(lcSecEngine) + << (m_bookmarks[cacheKey] ? "Updating" : "Registering") + << "bookmark for" << cacheKey; + m_bookmarks[cacheKey] = bookmarkData; + saveBookmarks(); + } else { + qCWarning(lcSecEngine) << "Failed to create bookmark data for" << url << error; + } +} + +/* + Saves the bookmarks cache to disk. + + We do this preemptively whenever we create a bookmark, to ensure + the file can be accessed later on even if the app crashes. +*/ +void SecurityScopedFileEngineHandler::saveBookmarks() +{ + QMacAutoReleasePool pool; + + NSError *error = nullptr; + NSURL *bookmarksFilePath = bookmarksFile(); + [NSFileManager.defaultManager + createDirectoryAtURL:[bookmarksFilePath URLByDeletingLastPathComponent] + withIntermediateDirectories:YES attributes:nil error:&error]; + if (error) { + qCWarning(lcSecEngine) << "Failed to create bookmarks path:" << error; + return; + } + [m_bookmarks writeToURL:bookmarksFile() error:&error]; + if (error) { + qCWarning(lcSecEngine) << "Failed to save bookmarks to" + << bookmarksFile() << ":" << error; + } +} + +NSURL *SecurityScopedFileEngineHandler::bookmarksFile() const +{ + NSURL *appSupportDir = [[NSFileManager.defaultManager URLsForDirectory: + NSApplicationSupportDirectory inDomains:NSUserDomainMask] firstObject]; + return [appSupportDir URLByAppendingPathComponent:@"SecurityScopedBookmarks.plist"]; +} + +NSString *SecurityScopedFileEngineHandler::cacheKeyForUrl(NSURL *url) +{ + return cacheKeyForPath(QString::fromNSString(url.path)); +} + +NSString *SecurityScopedFileEngineHandler::cacheKeyForPath(const QString &path) +{ + auto normalized = path.normalized(QString::NormalizationForm_D); + // We assume the file paths we get via file dialogs and similar + // are already canonical, but clean it just in case. + return QDir::cleanPath(normalized).toNSString(); +} + +QT_END_NAMESPACE diff --git a/src/corelib/platform/darwin/qdarwinsecurityscopedfileengine_p.h b/src/corelib/platform/darwin/qdarwinsecurityscopedfileengine_p.h new file mode 100644 index 00000000000..f6098fa977d --- /dev/null +++ b/src/corelib/platform/darwin/qdarwinsecurityscopedfileengine_p.h @@ -0,0 +1,29 @@ +// Copyright (C) 2025 The Qt Company Ltd. +// SPDX-License-Identifier: LicenseRef-Qt-Commercial OR LGPL-3.0-only OR GPL-2.0-only OR GPL-3.0-only +// Qt-Security score:significant reason:default + +#ifndef QDARWINSECURITYSCOPEDFILEENGINE_H +#define QDARWINSECURITYSCOPEDFILEENGINE_H + +// +// W A R N I N G +// ------------- +// +// This file is part of the QPA API and is not meant to be used +// in applications. Usage of this API may make your code +// source and binary incompatible with future versions of Qt. +// +// We mean it. +// + +#include <QtCore/qurl.h> + +Q_FORWARD_DECLARE_OBJC_CLASS(NSURL); + +QT_BEGIN_NAMESPACE + +Q_CORE_EXPORT QUrl qt_apple_urlFromPossiblySecurityScopedURL(NSURL *url); + +QT_END_NAMESPACE + +#endif // QDARWINSECURITYSCOPEDFILEENGINE_H diff --git a/src/corelib/platform/wasm/qstdweb.cpp b/src/corelib/platform/wasm/qstdweb.cpp index 287138bb915..4f3ecc4c6d9 100644 --- a/src/corelib/platform/wasm/qstdweb.cpp +++ b/src/corelib/platform/wasm/qstdweb.cpp @@ -178,12 +178,17 @@ Blob Blob::slice(uint32_t begin, uint32_t end) const ArrayBuffer Blob::arrayBuffer_sync() const { emscripten::val buffer; - uint32_t handlerIndex = qstdweb::Promise::make(m_blob, QStringLiteral("arrayBuffer"), { - .thenFunc = [&buffer](emscripten::val arrayBuffer) { - buffer = arrayBuffer; + QList<uint32_t> handlers; + qstdweb::Promise::make( + handlers, + m_blob, + QStringLiteral("arrayBuffer"), + { + .thenFunc = [&buffer](emscripten::val arrayBuffer) { + buffer = arrayBuffer; } }); - Promise::suspendExclusive(handlerIndex); + Promise::suspendExclusive(handlers); return ArrayBuffer(buffer); } @@ -441,7 +446,7 @@ EventCallback::EventCallback(emscripten::val element, const std::string &name, } -uint32_t Promise::adoptPromise(emscripten::val promise, PromiseCallbacks callbacks) +uint32_t Promise::adoptPromise(emscripten::val promise, PromiseCallbacks callbacks, QList<uint32_t> *handlers) { Q_ASSERT_X(!!callbacks.catchFunc || !!callbacks.finallyFunc || !!callbacks.thenFunc, "Promise::adoptPromise", "must provide at least one callback function"); @@ -498,14 +503,21 @@ uint32_t Promise::adoptPromise(emscripten::val promise, PromiseCallbacks callbac promise = promise.call<emscripten::val>("finally", suspendResume->jsEventHandlerAt(*finallyIndex)); + if (handlers) { + if (thenIndex) + handlers->push_back(*thenIndex); + if (catchIndex) + handlers->push_back(*catchIndex); + handlers->push_back(*finallyIndex); + } return *finallyIndex; } -void Promise::suspendExclusive(uint32_t handlerIndex) +void Promise::suspendExclusive(QList<uint32_t> handlerIndices) { QWasmSuspendResumeControl *suspendResume = QWasmSuspendResumeControl::get(); Q_ASSERT(suspendResume); - suspendResume->suspendExclusive(handlerIndex); + suspendResume->suspendExclusive(handlerIndices); suspendResume->sendPendingEvents(); } @@ -657,11 +669,12 @@ void FileSystemWritableFileStreamIODevice::close() return; } - uint32_t handlerIndex = Promise::make(m_stream.val(), QStringLiteral("close"), { + QList<uint32_t> handlers; + Promise::make(handlers, m_stream.val(), QStringLiteral("close"), { .thenFunc = [](emscripten::val) { } }); - Promise::suspendExclusive(handlerIndex); + Promise::suspendExclusive(handlers); QIODevice::close(); } @@ -683,14 +696,15 @@ bool FileSystemWritableFileStreamIODevice::seek(qint64 pos) emscripten::val seekParams = emscripten::val::object(); seekParams.set("type", std::string("seek")); seekParams.set("position", static_cast<double>(pos)); - uint32_t handlerIndex = Promise::make(m_stream.val(), QStringLiteral("write"), { + QList<uint32_t> handlers; + Promise::make(handlers, m_stream.val(), QStringLiteral("write"), { .thenFunc = [&success](emscripten::val) { success = true; }, .catchFunc = [](emscripten::val) { } }, seekParams); - Promise::suspendExclusive(handlerIndex); + Promise::suspendExclusive(handlers); if (!success) return false; @@ -708,14 +722,15 @@ qint64 FileSystemWritableFileStreamIODevice::writeData(const char *data, qint64 bool success = false; Uint8Array array = Uint8Array::copyFrom(data, size); - uint32_t handlerIndex = Promise::make(m_stream.val(), QStringLiteral("write"), { + QList<uint32_t> handlers; + Promise::make(handlers, m_stream.val(), QStringLiteral("write"), { .thenFunc = [&success](emscripten::val) { success = true; }, .catchFunc = [](emscripten::val) { } }, array.val()); - Promise::suspendExclusive(handlerIndex); + Promise::suspendExclusive(handlers); if (success) { qint64 newPos = pos() + size; @@ -770,7 +785,8 @@ bool FileSystemFileIODevice::open(QIODevice::OpenMode mode) File file; bool success = false; - uint32_t handlerIndex = Promise::make(m_fileHandle.val(), QStringLiteral("getFile"), { + QList<uint32_t> handlers; + Promise::make(handlers, m_fileHandle.val(), QStringLiteral("getFile"), { .thenFunc = [&file, &success](emscripten::val fileVal) { file = File(fileVal); success = true; @@ -778,7 +794,7 @@ bool FileSystemFileIODevice::open(QIODevice::OpenMode mode) .catchFunc = [](emscripten::val) { } }); - Promise::suspendExclusive(handlerIndex); + Promise::suspendExclusive(handlers); if (success) { m_blobDevice = std::make_unique<BlobIODevice>(file.slice(0, file.size())); @@ -796,7 +812,8 @@ bool FileSystemFileIODevice::open(QIODevice::OpenMode mode) FileSystemWritableFileStream writableStream; bool success = false; - uint32_t handlerIndex = Promise::make(m_fileHandle.val(), QStringLiteral("createWritable"), { + QList<uint32_t> handlers; + Promise::make(handlers, m_fileHandle.val(), QStringLiteral("createWritable"), { .thenFunc = [&writableStream, &success](emscripten::val writable) { writableStream = FileSystemWritableFileStream(writable); success = true; @@ -804,7 +821,7 @@ bool FileSystemFileIODevice::open(QIODevice::OpenMode mode) .catchFunc = [](emscripten::val) { } }); - Promise::suspendExclusive(handlerIndex); + Promise::suspendExclusive(handlers); if (success) { m_writableDevice = std::make_unique<FileSystemWritableFileStreamIODevice>(writableStream); diff --git a/src/corelib/platform/wasm/qstdweb_p.h b/src/corelib/platform/wasm/qstdweb_p.h index 9a97370448e..b14d9e4012f 100644 --- a/src/corelib/platform/wasm/qstdweb_p.h +++ b/src/corelib/platform/wasm/qstdweb_p.h @@ -238,7 +238,7 @@ namespace qstdweb { }; namespace Promise { - uint32_t Q_CORE_EXPORT adoptPromise(emscripten::val promise, PromiseCallbacks callbacks); + uint32_t Q_CORE_EXPORT adoptPromise(emscripten::val promise, PromiseCallbacks callbacks, QList<uint32_t> *handlers = nullptr); template<typename... Args> uint32_t make(emscripten::val target, @@ -255,7 +255,24 @@ namespace qstdweb { return adoptPromise(std::move(promiseObject), std::move(callbacks)); } - void Q_CORE_EXPORT suspendExclusive(uint32_t handlerIndex); + template<typename... Args> + void make( + QList<uint32_t> &handlers, + emscripten::val target, + QString methodName, + PromiseCallbacks callbacks, + Args... args) + { + emscripten::val promiseObject = target.call<emscripten::val>( + methodName.toStdString().c_str(), std::forward<Args>(args)...); + if (promiseObject.isUndefined() || promiseObject["constructor"]["name"].as<std::string>() != "Promise") { + qFatal("This function did not return a promise"); + } + + adoptPromise(std::move(promiseObject), std::move(callbacks), &handlers); + } + + void Q_CORE_EXPORT suspendExclusive(QList<uint32_t> handlerIndices); void Q_CORE_EXPORT all(std::vector<emscripten::val> promises, PromiseCallbacks callbacks); }; diff --git a/src/corelib/platform/wasm/qwasmsuspendresumecontrol.cpp b/src/corelib/platform/wasm/qwasmsuspendresumecontrol.cpp index 5fe92926240..a4bc7843380 100644 --- a/src/corelib/platform/wasm/qwasmsuspendresumecontrol.cpp +++ b/src/corelib/platform/wasm/qwasmsuspendresumecontrol.cpp @@ -196,9 +196,13 @@ void QWasmSuspendResumeControl::suspend() qtSuspendJs(); } -void QWasmSuspendResumeControl::suspendExclusive(uint32_t eventHandlerIndex) +void QWasmSuspendResumeControl::suspendExclusive(QList<uint32_t> eventHandlerIndices) { - suspendResumeControlJs().set("exclusiveEventHandler", eventHandlerIndex); + m_eventFilter = [eventHandlerIndices](int handler) { + return eventHandlerIndices.contains(handler); + }; + + suspendResumeControlJs().set("exclusiveEventHandler", eventHandlerIndices.back()); qtSuspendJs(); } @@ -211,37 +215,27 @@ int QWasmSuspendResumeControl::sendPendingEvents() emscripten::val control = suspendResumeControlJs(); emscripten::val pendingEvents = control["pendingEvents"]; - if (control["exclusiveEventHandler"].as<int>() > 0) - return sendPendingExclusiveEvent(); - - if (pendingEvents["length"].as<int>() == 0) - return 0; - int count = 0; - while (pendingEvents["length"].as<int>() > 0) { // Make sure it is reentrant - // Grab one event (handler and arg), and call it - emscripten::val event = pendingEvents.call<val>("shift"); - auto it = m_eventHandlers.find(event["index"].as<int>()); - if (it != m_eventHandlers.end()) - it->second(event["arg"]); - ++count; + for (int i = 0; i < pendingEvents["length"].as<int>();) { + if (!m_eventFilter(pendingEvents[i]["index"].as<int>())) { + ++i; + } else { + // Grab one event (handler and arg), and call it + emscripten::val event = pendingEvents[i]; + pendingEvents.call<void>("splice", i, 1); + + auto it = m_eventHandlers.find(event["index"].as<int>()); + if (it != m_eventHandlers.end()) + it->second(event["arg"]); + ++count; + } } - return count; -} -// Sends the pending exclusive event, and resets the "exclusive" state -int QWasmSuspendResumeControl::sendPendingExclusiveEvent() -{ - emscripten::val control = suspendResumeControlJs(); - int exclusiveHandlerIndex = control["exclusiveEventHandler"].as<int>(); - control.set("exclusiveEventHandler", 0); - emscripten::val event = control["pendingEvents"].call<val>("pop"); - int eventHandlerIndex = event["index"].as<int>(); - Q_ASSERT(exclusiveHandlerIndex == eventHandlerIndex); - auto it = m_eventHandlers.find(eventHandlerIndex); - Q_ASSERT(it != m_eventHandlers.end()); - it->second(event["arg"]); - return 1; + if (control["exclusiveEventHandler"].as<int>() > 0) { + control.set("exclusiveEventHandler", 0); + m_eventFilter = [](int) { return true;}; + } + return count; } void qtSendPendingEvents() diff --git a/src/corelib/platform/wasm/qwasmsuspendresumecontrol_p.h b/src/corelib/platform/wasm/qwasmsuspendresumecontrol_p.h index b750d80314c..ff97ff3d7ea 100644 --- a/src/corelib/platform/wasm/qwasmsuspendresumecontrol_p.h +++ b/src/corelib/platform/wasm/qwasmsuspendresumecontrol_p.h @@ -38,15 +38,16 @@ public: static emscripten::val suspendResumeControlJs(); void suspend(); - void suspendExclusive(uint32_t eventHandlerIndex); + // Accept events for all handlers, start to process events on last handler in list + void suspendExclusive(QList<uint32_t> eventHandlerIndices); int sendPendingEvents(); - int sendPendingExclusiveEvent(); private: friend void qtSendPendingEvents(); static QWasmSuspendResumeControl *s_suspendResumeControl; std::map<int, std::function<void(emscripten::val)>> m_eventHandlers; + std::function<bool(int)> m_eventFilter = [](int) { return true; }; }; class Q_CORE_EXPORT QWasmEventHandler diff --git a/src/corelib/text/qlocale_icu.cpp b/src/corelib/text/qlocale_icu.cpp index a10ae1c84b2..7e1dba5ee92 100644 --- a/src/corelib/text/qlocale_icu.cpp +++ b/src/corelib/text/qlocale_icu.cpp @@ -17,10 +17,10 @@ static_assert(std::is_same_v<UChar, char16_t>, namespace QtIcuPrivate { -enum class CaseConversion : bool { Upper, Lower }; +enum class IcuCaseConversion : bool { Upper, Lower }; static bool qt_u_strToCase(const QString &str, QString *out, const char *localeID, - CaseConversion conv) + IcuCaseConversion conv) { Q_ASSERT(out); @@ -34,9 +34,9 @@ static bool qt_u_strToCase(const QString &str, QString *out, const char *localeI // try to be a completely transparent wrapper: using R [[maybe_unused]] = decltype(u_strToUpper(std::forward<decltype(args)>(args)...)); switch (conv) { - case CaseConversion::Upper: + case IcuCaseConversion::Upper: return u_strToUpper(std::forward<decltype(args)>(args)...); - case CaseConversion::Lower: + case IcuCaseConversion::Lower: return u_strToLower(std::forward<decltype(args)>(args)...); }; Q_UNREACHABLE_RETURN(R{0}); @@ -79,7 +79,7 @@ QString QLocalePrivate::toUpper(const QString &str, bool *ok) const Q_ASSERT(ok); using namespace QtIcuPrivate; QString out; - *ok = qt_u_strToCase(str, &out, bcp47Name('_'), CaseConversion::Upper); + *ok = qt_u_strToCase(str, &out, bcp47Name('_'), IcuCaseConversion::Upper); return out; } @@ -88,7 +88,7 @@ QString QLocalePrivate::toLower(const QString &str, bool *ok) const Q_ASSERT(ok); using namespace QtIcuPrivate; QString out; - *ok = qt_u_strToCase(str, &out, bcp47Name('_'), CaseConversion::Lower); + *ok = qt_u_strToCase(str, &out, bcp47Name('_'), IcuCaseConversion::Lower); return out; } diff --git a/src/gui/image/qpaintengine_pic.cpp b/src/gui/image/qpaintengine_pic.cpp index ba4888cef75..b151c3b2d18 100644 --- a/src/gui/image/qpaintengine_pic.cpp +++ b/src/gui/image/qpaintengine_pic.cpp @@ -31,6 +31,7 @@ public: QDataStream s; QPainter *pt; QPicturePrivate *pic_d; + bool sizeLimitExceeded = false; }; QPicturePaintEngine::QPicturePaintEngine() @@ -68,6 +69,7 @@ bool QPicturePaintEngine::begin(QPaintDevice *pd) d->s.setVersion(d->pic_d->formatMajor); d->pic_d->pictb.open(QIODevice::WriteOnly | QIODevice::Truncate); + d->sizeLimitExceeded = false; d->s.writeRawData(qt_mfhdr_tag, 4); d->s << (quint16) 0 << (quint16) d->pic_d->formatMajor << (quint16) d->pic_d->formatMinor; d->s << (quint8) QPicturePrivate::PdcBegin << (quint8) sizeof(qint32); @@ -109,7 +111,7 @@ bool QPicturePaintEngine::end() d->s << cs; // write checksum d->pic_d->pictb.close(); setActive(false); - return true; + return !d->sizeLimitExceeded; } #define SERIALIZE_CMD(c) \ @@ -286,6 +288,19 @@ void QPicturePaintEngine::updateRenderHints(QPainter::RenderHints hints) void QPicturePaintEngine::writeCmdLength(int pos, const QRectF &r, bool corr) { Q_D(QPicturePaintEngine); + + constexpr int sizeLimit = std::numeric_limits<int>::max() - 8; // Leave room for ending bytes + if (d->sizeLimitExceeded || d->pic_d->pictb.pos() > sizeLimit) { + d->pic_d->trecs--; // Remove last command added, started by SERIALIZE_CMD + d->pic_d->pictb.seek(pos - 2); + d->pic_d->pictbData.resize(pos - 2); + if (!d->sizeLimitExceeded) { + d->sizeLimitExceeded = true; + qWarning("QPicture: size limit exceeded, will be truncated"); + } + return; + } + int newpos = d->pic_d->pictb.pos(); // new position int length = newpos - pos; QRectF br(r); diff --git a/src/gui/image/qpicture.cpp b/src/gui/image/qpicture.cpp index ac0525d7abf..db2a5fd9ba9 100644 --- a/src/gui/image/qpicture.cpp +++ b/src/gui/image/qpicture.cpp @@ -970,7 +970,8 @@ QPicture& QPicture::operator=(const QPicture &p) Constructs a QPicturePrivate */ QPicturePrivate::QPicturePrivate() - : in_memory_only(false) + : pictb(&pictbData), + in_memory_only(false) { } @@ -980,7 +981,8 @@ QPicturePrivate::QPicturePrivate() Copy-Constructs a QPicturePrivate. Needed when detaching. */ QPicturePrivate::QPicturePrivate(const QPicturePrivate &other) - : trecs(other.trecs), + : pictb(&pictbData), + trecs(other.trecs), formatOk(other.formatOk), formatMinor(other.formatMinor), brect(other.brect), diff --git a/src/gui/image/qpicture_p.h b/src/gui/image/qpicture_p.h index c512f49320b..1d8142f44b7 100644 --- a/src/gui/image/qpicture_p.h +++ b/src/gui/image/qpicture_p.h @@ -113,6 +113,7 @@ public: bool checkFormat(); void resetFormat(); + QByteArray pictbData; QBuffer pictb; int trecs; bool formatOk; diff --git a/src/gui/image/qppmhandler.cpp b/src/gui/image/qppmhandler.cpp index a0a1dcdaca9..8a413ded95e 100644 --- a/src/gui/image/qppmhandler.cpp +++ b/src/gui/image/qppmhandler.cpp @@ -123,8 +123,8 @@ static bool read_pbm_body(QIODevice *device, char type, int w, int h, int mcc, Q break; case '2': // ascii PGM case '5': // raw PGM - nbits = 8; - format = QImage::Format_Grayscale8; + nbits = mcc <= std::numeric_limits<uint8_t>::max() ? 8 : 16; + format = mcc <= std::numeric_limits<uint8_t>::max() ? QImage::Format_Grayscale8 : QImage::Format_Grayscale16; break; case '3': // ascii PPM case '6': // raw PPM @@ -175,20 +175,20 @@ static bool read_pbm_body(QIODevice *device, char type, int w, int h, int mcc, Q } } delete[] buf24; - } else if (nbits == 8 && mcc > 255) { // type 5 16bit - pbm_bpl = 2*w; + } else if (nbits == 16) { // type 5 16bit + pbm_bpl = sizeof(uint16_t)*w; uchar *buf16 = new uchar[pbm_bpl]; for (y=0; y<h; y++) { if (device->read((char *)buf16, pbm_bpl) != pbm_bpl) { delete[] buf16; return false; } - uchar *p = outImage->scanLine(y); - uchar *end = p + w; - uchar *b = buf16; + uint16_t *p = reinterpret_cast<uint16_t *>(outImage->scanLine(y)); + uint16_t *end = p + w; + uint16_t *b = reinterpret_cast<uint16_t *>(buf16); while (p < end) { - *p++ = (b[0] << 8 | b[1]) * 255 / mcc; - b += 2; + *p++ = qFromBigEndian(*b) * std::numeric_limits<uint16_t>::max() / mcc; + b++; } } delete[] buf16; @@ -225,13 +225,25 @@ static bool read_pbm_body(QIODevice *device, char type, int w, int h, int mcc, Q *p++ = b; } } else if (nbits == 8) { - if (mcc == 255) { + if (mcc == std::numeric_limits<uint8_t>::max()) { while (n-- && ok) { *p++ = read_pbm_int(device, &ok); } } else { while (n-- && ok) { - *p++ = (read_pbm_int(device, &ok) & 0xffff) * 255 / mcc; + *p++ = (read_pbm_int(device, &ok) & 0xffff) * std::numeric_limits<uint8_t>::max() / mcc; + } + } + } else if (nbits == 16) { + uint16_t* data = reinterpret_cast<uint16_t*>(p); + qsizetype numPixel = n/2; + if (mcc == std::numeric_limits<uint16_t>::max()) { + while (numPixel-- && ok) { + *data++ = read_pbm_int(device, &ok); + } + } else { + while (numPixel-- && ok) { + *data++ = (read_pbm_int(device, &ok) & 0xffff) * std::numeric_limits<uint16_t>::max() / mcc; } } } else { // 32 bits @@ -280,7 +292,7 @@ static bool write_pbm_image(QIODevice *out, const QImage &sourceImage, QByteArra if (format == "pbm") { image = image.convertToFormat(QImage::Format_Mono); } else if (gray) { - image = image.convertToFormat(QImage::Format_Grayscale8); + image = image.depth() <= 8 ? image.convertToFormat(QImage::Format_Grayscale8) : image.convertToFormat(QImage::Format_Grayscale16); } else { switch (image.format()) { case QImage::Format_Mono: @@ -388,6 +400,34 @@ static bool write_pbm_image(QIODevice *out, const QImage &sourceImage, QByteArra delete [] buf; break; } + case 16: { + str.insert(1, gray ? '5' : '6'); + str.append("65535\n"); + if (out->write(str, str.size()) != str.size()) + return false; + qsizetype bpl = sizeof(uint16_t) * qsizetype(w) * (gray ? 1 : 3); + uchar *buf = new uchar[bpl]; + for (uint y=0; y<h; y++) { + const uint16_t *b = reinterpret_cast<const uint16_t *>(image.constScanLine(y)); + uint16_t *p = reinterpret_cast<uint16_t *>(buf); + uint16_t *end = reinterpret_cast<uint16_t *>(buf + bpl); + if (gray) { + while (p < end) + *p++ = qToBigEndian(*b++); + } else { + while (p < end) { + uchar color = qToBigEndian(*b++); + *p++ = color; + *p++ = color; + *p++ = color; + } + } + if (bpl != (qsizetype)out->write((char*)buf, bpl)) + return false; + } + delete [] buf; + break; + } case 32: { str.insert(1, '6'); @@ -530,7 +570,10 @@ QVariant QPpmHandler::option(ImageOption option) const break; case '2': // ascii PGM case '5': // raw PGM - format = QImage::Format_Grayscale8; + if (mcc <= std::numeric_limits<uint8_t>::max()) + format = QImage::Format_Grayscale8; + else + format = QImage::Format_Grayscale16; break; case '3': // ascii PPM case '6': // raw PPM diff --git a/src/gui/painting/qcolorspace.cpp b/src/gui/painting/qcolorspace.cpp index c43d133dd1e..9149971b999 100644 --- a/src/gui/painting/qcolorspace.cpp +++ b/src/gui/painting/qcolorspace.cpp @@ -1206,12 +1206,12 @@ QByteArray QColorSpace::iccProfile() const QColorSpace QColorSpace::fromIccProfile(const QByteArray &iccProfile) { // Must detach if input is fromRawData(); nullTerminated() is trick to do that and nothing else - const QByteArray ownedIccProfile(iccProfile.nullTerminated()); + QByteArray ownedIccProfile = iccProfile.nullTerminated(); QColorSpace colorSpace; if (QIcc::fromIccProfile(ownedIccProfile, &colorSpace)) return colorSpace; colorSpace.detach(); - colorSpace.d_ptr->iccProfile = ownedIccProfile; + colorSpace.d_ptr->iccProfile = std::move(ownedIccProfile); return colorSpace; } diff --git a/src/gui/painting/qpainter.cpp b/src/gui/painting/qpainter.cpp index a3f9f069b69..2b6a8a858f9 100644 --- a/src/gui/painting/qpainter.cpp +++ b/src/gui/painting/qpainter.cpp @@ -6474,8 +6474,9 @@ QRectF QPainter::boundingRect(const QRectF &r, const QString &text, const QTextO and height (on both 1x and 2x displays), and produces high-resolution output on 2x displays. - The \a position offset is always in the painter coordinate system, - indepentent of display devicePixelRatio. + The \a position offset is provided in the device independent pixels + relative to the top-left corner of the \a rectangle. The \a position + can be used to align the repeating pattern inside the \a rectangle. \sa drawPixmap() */ @@ -6497,8 +6498,8 @@ void QPainter::drawTiledPixmap(const QRectF &r, const QPixmap &pixmap, const QPo qt_painter_thread_test(d->device->devType(), d->engine->type(), "drawTiledPixmap()"); #endif - qreal sw = pixmap.width(); - qreal sh = pixmap.height(); + const qreal sw = pixmap.width() / pixmap.devicePixelRatio(); + const qreal sh = pixmap.height() / pixmap.devicePixelRatio(); qreal sx = sp.x(); qreal sy = sp.y(); if (sx < 0) @@ -6579,8 +6580,12 @@ void QPainter::drawTiledPixmap(const QRectF &r, const QPixmap &pixmap, const QPo (\a{x}, \a{y}) specifies the top-left point in the paint device that is to be drawn onto; with the given \a width and \a - height. (\a{sx}, \a{sy}) specifies the top-left point in the \a - pixmap that is to be drawn; this defaults to (0, 0). + height. + + (\a{sx}, \a{sy}) specifies the origin inside the specified rectangle + where the pixmap will be drawn. The origin position is specified in + the device independent pixels relative to (\a{x}, \a{y}). This defaults + to (0, 0). */ #ifndef QT_NO_PICTURE diff --git a/src/network/access/http2/http2frames.cpp b/src/network/access/http2/http2frames.cpp index 3b52204c7d3..e6a3474d7b0 100644 --- a/src/network/access/http2/http2frames.cpp +++ b/src/network/access/http2/http2frames.cpp @@ -34,7 +34,8 @@ FrameType Frame::type() const quint32 Frame::streamID() const { Q_ASSERT(buffer.size() >= frameHeaderSize); - return qFromBigEndian<quint32>(&buffer[5]); + // RFC 9113, 4.1: 31-bit Stream ID; lastValidStreamID(0x7FFFFFFF) masks out the reserved MSB + return qFromBigEndian<quint32>(&buffer[5]) & lastValidStreamID; } FrameFlags Frame::flags() const diff --git a/src/network/access/http2/http2protocol.cpp b/src/network/access/http2/http2protocol.cpp index 050beacb31c..314be07f952 100644 --- a/src/network/access/http2/http2protocol.cpp +++ b/src/network/access/http2/http2protocol.cpp @@ -188,8 +188,9 @@ bool is_protocol_upgraded(const QHttpNetworkReply &reply) if (reply.statusCode() != 101) return false; + const auto values = reply.header().values(QHttpHeaders::WellKnownHeader::Upgrade); // Do some minimal checks here - we expect 'Upgrade: h2c' to be found. - for (const auto &v : reply.header().values(QHttpHeaders::WellKnownHeader::Upgrade)) { + for (const auto &v : values) { if (v.compare("h2c", Qt::CaseInsensitive) == 0) return true; } diff --git a/src/network/access/qhttp2connection.cpp b/src/network/access/qhttp2connection.cpp index 1d5c0d92b63..2895e8335d2 100644 --- a/src/network/access/qhttp2connection.cpp +++ b/src/network/access/qhttp2connection.cpp @@ -454,7 +454,7 @@ void QHttp2Stream::internalSendDATA() "[%p] stream %u, exhausted device %p, sent END_STREAM? %d, %ssending end stream " "after DATA", connection, m_streamID, m_uploadByteDevice, sentEND_STREAM, - m_endStreamAfterDATA ? "" : "not "); + !sentEND_STREAM && m_endStreamAfterDATA ? "" : "not "); if (!sentEND_STREAM && m_endStreamAfterDATA) { // We need to send an empty DATA frame with END_STREAM since we // have exhausted the device, but we haven't sent END_STREAM yet. @@ -690,8 +690,9 @@ void QHttp2Stream::handleDATA(const Frame &inboundFrame) m_recvWindow -= qint32(inboundFrame.payloadSize()); const bool endStream = inboundFrame.flags().testFlag(FrameFlag::END_STREAM); + const bool ignoreData = connection->streamIsIgnored(m_streamID); // Uncompress data if needed and append it ... - if (inboundFrame.dataSize() > 0 || endStream) { + if ((inboundFrame.dataSize() > 0 || endStream) && !ignoreData) { QByteArray fragment(reinterpret_cast<const char *>(inboundFrame.dataBegin()), inboundFrame.dataSize()); if (endStream) @@ -1245,16 +1246,12 @@ void QHttp2Connection::connectionError(Http2Error errorCode, const char *message { Q_ASSERT(message); // RFC 9113, 6.8: An endpoint MAY send multiple GOAWAY frames if circumstances change. - // Anyway, we do not send multiple GOAWAY frames. - if (m_goingAway) - return; qCCritical(qHttp2ConnectionLog, "[%p] Connection error: %s (%d)", this, message, int(errorCode)); // RFC 9113, 6.8: Endpoints SHOULD always send a GOAWAY frame before closing a connection so // that the remote peer can know whether a stream has been partially processed or not. - m_goingAway = true; sendGOAWAY(errorCode); auto messageView = QLatin1StringView(message); @@ -1295,6 +1292,20 @@ bool QHttp2Connection::isInvalidStream(quint32 streamID) noexcept return (!stream || stream->wasResetbyPeer()) && !streamWasResetLocally(streamID); } +/*! + When we send a GOAWAY we also send the ID of the last stream we know about + at the time. Any stream that starts after this one is ignored, but we still + have to process HEADERS due to compression state, and DATA due to stream and + connection window size changes. + Other than that - any \a streamID for which this returns true should be + ignored, and deleted at the earliest convenience. +*/ +bool QHttp2Connection::streamIsIgnored(quint32 streamID) const noexcept +{ + const bool streamIsRemote = (streamID & 1) == (m_connectionType == Type::Client ? 0 : 1); + return Q_UNLIKELY(streamIsRemote && m_lastStreamToProcess < streamID); +} + bool QHttp2Connection::sendClientPreface() { QIODevice *socket = getSocket(); @@ -1359,9 +1370,16 @@ bool QHttp2Connection::sendWINDOW_UPDATE(quint32 streamID, quint32 delta) bool QHttp2Connection::sendGOAWAY(Http2::Http2Error errorCode) { + m_goingAway = true; + // If this is the first time, start the timer: + if (m_lastStreamToProcess == Http2::lastValidStreamID) + m_goawayGraceTimer.setRemainingTime(GoawayGracePeriod); + m_lastStreamToProcess = std::min(m_lastIncomingStreamID, m_lastStreamToProcess); + qCDebug(qHttp2ConnectionLog, "[%p] Sending GOAWAY frame, error code %u, last stream %u", this, + errorCode, m_lastStreamToProcess); frameWriter.start(FrameType::GOAWAY, FrameFlag::EMPTY, Http2PredefinedParameters::connectionStreamID); - frameWriter.append(quint32(m_lastIncomingStreamID)); + frameWriter.append(m_lastStreamToProcess); frameWriter.append(quint32(errorCode)); return frameWriter.write(*getSocket()); } @@ -1411,8 +1429,20 @@ void QHttp2Connection::handleDATA() if (stream) stream->handleDATA(inboundFrame); - if (inboundFrame.flags().testFlag(FrameFlag::END_STREAM)) - emit receivedEND_STREAM(streamID); + + if (inboundFrame.flags().testFlag(FrameFlag::END_STREAM)) { + const bool ignoreData = stream && streamIsIgnored(stream->streamID()); + if (!ignoreData) { + emit receivedEND_STREAM(streamID); + } else { + // Stream opened after our GOAWAY cut-off. We would just drop the + // data, but needed to handle it enough to track sizes of streams and + // connection windows. Since we've now taken care of that, we can + // at last close and delete it. + stream->setState(QHttp2Stream::State::Closed); + delete stream; + } + } if (sessionReceiveWindowSize < maxSessionReceiveWindowSize / 2) { // @future[consider]: emit signal instead @@ -1454,8 +1484,15 @@ void QHttp2Connection::handleHEADERS() return; } - qCDebug(qHttp2ConnectionLog, "[%p] Created new incoming stream %d", this, streamID); - emit newIncomingStream(newStream); + qCDebug(qHttp2ConnectionLog, "[%p] New incoming stream %d", this, streamID); + if (!streamIsIgnored(newStream->streamID())) { + emit newIncomingStream(newStream); + } else if (m_goawayGraceTimer.hasExpired()) { + // We gave the peer some time to handle the GOAWAY message, but they have started a new + // stream, so we error out. + connectionError(Http2Error::PROTOCOL_ERROR, "Peer refused to GOAWAY."); + return; + } } else if (streamWasResetLocally(streamID)) { qCDebug(qHttp2ConnectionLog, "[%p] Received HEADERS on previously locally reset stream %d (must process but ignore)", @@ -1500,6 +1537,9 @@ void QHttp2Connection::handlePRIORITY() || inboundFrame.type() == FrameType::HEADERS); const auto streamID = inboundFrame.streamID(); + if (streamIsIgnored(streamID)) + return; + // RFC 9913, 6.3: If a PRIORITY frame is received with a stream identifier of 0x00, the // recipient MUST respond with a connection error if (streamID == connectionStreamID) @@ -1534,11 +1574,14 @@ void QHttp2Connection::handleRST_STREAM() { Q_ASSERT(inboundFrame.type() == FrameType::RST_STREAM); + const auto streamID = inboundFrame.streamID(); + if (streamIsIgnored(streamID)) + return; + // RFC 9113, 6.4: RST_STREAM frames MUST be associated with a stream. // If a RST_STREAM frame is received with a stream identifier of 0x0, // the recipient MUST treat this as a connection error (Section 5.4.1) // of type PROTOCOL_ERROR. - const auto streamID = inboundFrame.streamID(); if (streamID == connectionStreamID) return connectionError(PROTOCOL_ERROR, "RST_STREAM on 0x0"); @@ -1764,31 +1807,33 @@ void QHttp2Connection::handleGOAWAY() Q_ASSERT(inboundFrame.payloadSize() >= 8); const uchar *const src = inboundFrame.dataBegin(); - quint32 lastStreamID = qFromBigEndian<quint32>(src); + // RFC 9113, 4.1: 31-bit Stream ID; lastValidStreamID(0x7FFFFFFF) masks out the reserved MSB + const quint32 lastStreamID = qFromBigEndian<quint32>(src) & lastValidStreamID; const Http2Error errorCode = Http2Error(qFromBigEndian<quint32>(src + 4)); - if (!lastStreamID) { - // "The last stream identifier can be set to 0 if no - // streams were processed." - lastStreamID = 1; - } else if (!(lastStreamID & 0x1)) { - // 5.1.1 - we (client) use only odd numbers as stream identifiers. + // 6.8 "the GOAWAY contains the stream identifier of the last peer-initiated stream that was + // or might be processed on the sending endpoint in this connection." + // Alternatively, they can specify 0 as the last stream ID, meaning they are not intending to + // process any remaining stream(s). + const quint32 LocalMask = m_connectionType == Type::Client ? 1 : 0; + // The stream must match the LocalMask, meaning we initiated it, for the last stream ID to make + // sense - they are not processing their own streams. + if (lastStreamID != 0 && (lastStreamID & 0x1) != LocalMask) return connectionError(PROTOCOL_ERROR, "GOAWAY with invalid last stream ID"); - } else if (lastStreamID >= m_nextStreamID) { - // "A server that is attempting to gracefully shut down a connection SHOULD - // send an initial GOAWAY frame with the last stream identifier set to 2^31-1 - // and a NO_ERROR code." - if (lastStreamID != lastValidStreamID || errorCode != HTTP2_NO_ERROR) - return connectionError(PROTOCOL_ERROR, "GOAWAY invalid stream/error code"); - } else { - lastStreamID += 2; - } + qCDebug(qHttp2ConnectionLog, "[%p] Received GOAWAY frame, error code %u, last stream %u", + this, errorCode, lastStreamID); m_goingAway = true; emit receivedGOAWAY(errorCode, lastStreamID); - for (quint32 id = lastStreamID; id < m_nextStreamID; id += 2) { + // Since the embedded stream ID is the last one that was or _might be_ processed, + // we cancel anything that comes after it. 0 can be used in the special case that + // no streams at all were or will be processed. + const quint32 firstPossibleStream = m_connectionType == Type::Client ? 1 : 2; + const quint32 firstCancelledStream = lastStreamID ? lastStreamID + 2 : firstPossibleStream; + Q_ASSERT((firstCancelledStream & 0x1) == LocalMask); + for (quint32 id = firstCancelledStream; id < m_nextStreamID; id += 2) { QHttp2Stream *stream = m_streams.value(id, nullptr); if (stream && stream->isActive()) stream->finishWithError(errorCode, "Received GOAWAY"_L1); @@ -1809,7 +1854,8 @@ void QHttp2Connection::handleWINDOW_UPDATE() // errors on the connection flow-control window MUST be treated as a connection error const bool valid = delta && delta <= quint32(std::numeric_limits<qint32>::max()); const auto streamID = inboundFrame.streamID(); - + if (streamIsIgnored(streamID)) + return; // RFC 9113, 6.9: A WINDOW_UPDATE frame with a length other than 4 octets MUST be treated // as a connection error (Section 5.4.1) of type FRAME_SIZE_ERROR. @@ -1939,6 +1985,18 @@ void QHttp2Connection::handleContinuedHEADERS() if (streamWasResetLocally(streamID) || streamIt == m_streams.cend()) return; // No more processing without a stream from here on. + if (streamIsIgnored(streamID)) { + // Stream was established after GOAWAY cut-off, we ignore it, but we + // have to process things that alter state. That already happened, so we + // stop here. + if (continuedFrames[0].flags().testFlag(Http2::FrameFlag::END_STREAM)) { + if (QHttp2Stream *stream = streamIt.value()) { + stream->setState(QHttp2Stream::State::Closed); + delete stream; + } + } + return; + } switch (firstFrameType) { case FrameType::HEADERS: diff --git a/src/network/access/qhttp2connection_p.h b/src/network/access/qhttp2connection_p.h index dcdc0f91318..f3f14145278 100644 --- a/src/network/access/qhttp2connection_p.h +++ b/src/network/access/qhttp2connection_p.h @@ -283,6 +283,8 @@ private: bool isInvalidStream(quint32 streamID) noexcept; bool streamWasResetLocally(quint32 streamID) noexcept; + Q_ALWAYS_INLINE + bool streamIsIgnored(quint32 streamID) const noexcept; void connectionError(Http2::Http2Error errorCode, const char *message); // Connection failed to be established? @@ -400,6 +402,10 @@ private: bool m_goingAway = false; bool pushPromiseEnabled = false; quint32 m_lastIncomingStreamID = Http2::connectionStreamID; + // Gets lowered when/if we send GOAWAY: + quint32 m_lastStreamToProcess = Http2::lastValidStreamID; + static constexpr std::chrono::duration GoawayGracePeriod = std::chrono::seconds(60); + QDeadlineTimer m_goawayGraceTimer; bool m_prefaceSent = false; diff --git a/src/network/access/qhttpnetworkheader.cpp b/src/network/access/qhttpnetworkheader.cpp index acb4fcfa8e1..d09d856e441 100644 --- a/src/network/access/qhttpnetworkheader.cpp +++ b/src/network/access/qhttpnetworkheader.cpp @@ -4,8 +4,6 @@ #include "qhttpnetworkheader_p.h" -#include <algorithm> - QT_BEGIN_NAMESPACE QHttpNetworkHeader::~QHttpNetworkHeader() diff --git a/src/network/access/qnetworkrequest.cpp b/src/network/access/qnetworkrequest.cpp index 87f113be5dc..5047fc77bd5 100644 --- a/src/network/access/qnetworkrequest.cpp +++ b/src/network/access/qnetworkrequest.cpp @@ -21,7 +21,6 @@ #include "QtCore/private/qduplicatetracker_p.h" #include "QtCore/private/qtools_p.h" -#include <ctype.h> #if QT_CONFIG(datestring) # include <stdio.h> #endif diff --git a/src/plugins/platforms/cocoa/qcocoaapplicationdelegate.mm b/src/plugins/platforms/cocoa/qcocoaapplicationdelegate.mm index 7644867700a..7ca3e61dfa5 100644 --- a/src/plugins/platforms/cocoa/qcocoaapplicationdelegate.mm +++ b/src/plugins/platforms/cocoa/qcocoaapplicationdelegate.mm @@ -25,6 +25,8 @@ #include <qpa/qwindowsysteminterface.h> #include <qwindowdefs.h> +#include <QtCore/private/qdarwinsecurityscopedfileengine_p.h> + QT_USE_NAMESPACE @implementation QCocoaApplicationDelegate { @@ -194,6 +196,23 @@ QT_USE_NAMESPACE QCocoaMenuBar::insertWindowMenu(); } +/*! + Tells the delegate to open the specified files + + Sent by the system when the user drags a file to the app's icon + in places like Finder or the Dock, or opens a file via the "Open + With" menu in Finder. + + These actions can happen when the application is not running, + in which case the call comes in between willFinishLaunching + and didFinishLaunching. In this case we don't pass on the + incoming file paths as file open events, as the paths are + also part of the command line arguments, and Qt applications + normally expect to handle file opening via those. + + \note The app must register itself as a handler for each file + type via the CFBundleDocumentTypes key in the Info.plist. + */ - (void)application:(NSApplication *)sender openFiles:(NSArray *)filenames { Q_UNUSED(filenames); @@ -209,7 +228,10 @@ QT_USE_NAMESPACE if (qApp->arguments().contains(qtFileName)) continue; } - QWindowSystemInterface::handleFileOpenEvent(qtFileName); + QUrl url = qt_apple_urlFromPossiblySecurityScopedURL([NSURL fileURLWithPath:fileName]); + QWindowSystemInterface::handleFileOpenEvent(url); + // FIXME: We're supposed to call [NSApp replyToOpenOrPrint:] here, but we + // don't know if the open operation succeeded, failed, or was cancelled. } if ([reflectionDelegate respondsToSelector:_cmd]) @@ -262,6 +284,17 @@ QT_USE_NAMESPACE } } +/*! + Returns a Boolean value that indicates if the app responds + to reopen AppleEvents. + + These events are sent whenever the Finder reactivates an already + running application because someone double-clicked it again or used + the dock to activate it. + + We pass the activation on to Qt, and return YES, to let AppKit + follow its normal flow. + */ - (BOOL)applicationShouldHandleReopen:(NSApplication *)theApplication hasVisibleWindows:(BOOL)flag { if ([reflectionDelegate respondsToSelector:_cmd]) @@ -309,6 +342,25 @@ QT_USE_NAMESPACE [self doesNotRecognizeSelector:invocationSelector]; } +/*! + Callback for when the application is asked to pick up a user activity + from another app (also known as Handoff, which is part of the bigger + Continuity story for Apple operating systems). + + This is normally managed by two apps by the same vendor explicitly + initiating a custom NSUserActivity and picking it up in another app + on the same or another device, which we don't have APIs for. + + This is also how the system supports Universal Links, where a web page + can deep-link into an app. In this case the app needs to claim and + validate an associated domain. The resulting link will be delivered + as a special NSUserActivityTypeBrowsingWeb activity type, which we + treat as QDesktopServices::handleUrl(). + + Finally, for NS/UIDocument based apps (which Qt is not), the system + automatically handles document hand-off if the application includes + the NSUbiquitousDocumentUserActivityType key in its Info.plist. + */ - (BOOL)application:(NSApplication *)application continueUserActivity:(NSUserActivity *)userActivity restorationHandler:(void(^)(NSArray<id<NSUserActivityRestoring>> *restorableObjects))restorationHandler { @@ -331,6 +383,18 @@ QT_USE_NAMESPACE return NO; } +/*! + Callback for when the app is asked to open custom URL schemes. + + We register a handler for events of type kInternetEventClass with the + NSAppleEventManager during application start. + + The application must include the schemes in the CFBundleURLTypes + key of the Info.plist. + + \note This callback is not used for http/https URLs, see + continueUserActivity above for how we handle that. + */ - (void)getUrl:(NSAppleEventDescriptor *)event withReplyEvent:(NSAppleEventDescriptor *)replyEvent { Q_UNUSED(replyEvent); diff --git a/src/plugins/platforms/cocoa/qcocoafiledialoghelper.mm b/src/plugins/platforms/cocoa/qcocoafiledialoghelper.mm index 4c4e5fac962..a79682e4e14 100644 --- a/src/plugins/platforms/cocoa/qcocoafiledialoghelper.mm +++ b/src/plugins/platforms/cocoa/qcocoafiledialoghelper.mm @@ -19,6 +19,7 @@ #include <QtCore/qregularexpression.h> #include <QtCore/qpointer.h> #include <QtCore/private/qcore_mac_p.h> +#include <QtCore/private/qdarwinsecurityscopedfileengine_p.h> #include <QtGui/qguiapplication.h> #include <QtGui/private/qguiapplication_p.h> @@ -395,14 +396,15 @@ typedef QSharedPointer<QFileDialogOptions> SharedPointerFileDialogOptions; { if (auto *openPanel = openpanel_cast(m_panel)) { QList<QUrl> result; - for (NSURL *url in openPanel.URLs) { - QString path = QString::fromNSString(url.path).normalized(QString::NormalizationForm_C); - result << QUrl::fromLocalFile(path); - } + for (NSURL *url in openPanel.URLs) + result << qt_apple_urlFromPossiblySecurityScopedURL(url); return result; } else { - QString filename = QString::fromNSString(m_panel.URL.path).normalized(QString::NormalizationForm_C); - QFileInfo fileInfo(filename); + QUrl result = qt_apple_urlFromPossiblySecurityScopedURL(m_panel.URL); + if (qt_apple_isSandboxed()) + return { result }; // Can't tweak suffix + + QFileInfo fileInfo(result.toLocalFile()); if (fileInfo.suffix().isEmpty() && ![self fileInfoMatchesCurrentNameFilter:fileInfo]) { // We end up in this situation if we accept a file name without extension @@ -733,6 +735,26 @@ bool QCocoaFileDialogHelper::show(Qt::WindowFlags windowFlags, Qt::WindowModalit return false; } + if (qt_apple_isSandboxed()) { + static bool canRead = qt_mac_processHasEntitlement( + u"com.apple.security.files.user-selected.read-only"_s); + static bool canReadWrite = qt_mac_processHasEntitlement( + u"com.apple.security.files.user-selected.read-write"_s); + + if (options()->acceptMode() == QFileDialogOptions::AcceptSave + && !canReadWrite) { + qWarning() << "Sandboxed application is missing user-selected files" + << "read-write entitlement. Falling back to non-native dialog"; + return false; + } + + if (!canReadWrite && !canRead) { + qWarning() << "Sandboxed application is missing user-selected files" + << "entitlement. Falling back to non-native dialog"; + return false; + } + } + createNSOpenSavePanelDelegate(); return [m_delegate showPanel:windowModality withParent:parent]; diff --git a/src/plugins/platforms/ios/qiosapplicationdelegate.mm b/src/plugins/platforms/ios/qiosapplicationdelegate.mm index 380c5a588e6..7cbb4fc40f5 100644 --- a/src/plugins/platforms/ios/qiosapplicationdelegate.mm +++ b/src/plugins/platforms/ios/qiosapplicationdelegate.mm @@ -16,6 +16,8 @@ #include <QtCore/QtCore> +#include <QtCore/private/qdarwinsecurityscopedfileengine_p.h> + @interface QIOSWindowSceneDelegate : NSObject<UIWindowSceneDelegate> @property (nullable, nonatomic, strong) UIWindow *window; @end @@ -112,7 +114,7 @@ QIOSServices *iosServices = static_cast<QIOSServices *>(iosIntegration->services()); for (UIOpenURLContext *urlContext in URLContexts) { - QUrl url = QUrl::fromNSURL(urlContext.URL); + QUrl url = qt_apple_urlFromPossiblySecurityScopedURL(urlContext.URL); if (url.isLocalFile()) QWindowSystemInterface::handleFileOpenEvent(url); else diff --git a/src/plugins/platforms/ios/qiosdocumentpickercontroller.mm b/src/plugins/platforms/ios/qiosdocumentpickercontroller.mm index c173aa426fc..57a5e100c9e 100644 --- a/src/plugins/platforms/ios/qiosdocumentpickercontroller.mm +++ b/src/plugins/platforms/ios/qiosdocumentpickercontroller.mm @@ -8,6 +8,7 @@ #include "qiosdocumentpickercontroller.h" #include <QtCore/qpointer.h> +#include <QtCore/private/qdarwinsecurityscopedfileengine_p.h> @implementation QIOSDocumentPickerController { QPointer<QIOSFileDialog> m_fileDialog; @@ -17,9 +18,11 @@ { NSMutableArray <UTType *> *docTypes = [[[NSMutableArray alloc] init] autorelease]; - QStringList nameFilters = fileDialog->options()->nameFilters(); - if (!nameFilters.isEmpty() && (fileDialog->options()->fileMode() != QFileDialogOptions::Directory - || fileDialog->options()->fileMode() != QFileDialogOptions::DirectoryOnly)) + const auto options = fileDialog->options(); + + const QStringList nameFilters = options->nameFilters(); + if (!nameFilters.isEmpty() && (options->fileMode() != QFileDialogOptions::Directory + || options->fileMode() != QFileDialogOptions::DirectoryOnly)) { QStringList results; for (const QString &filter : nameFilters) @@ -28,21 +31,8 @@ docTypes = [self computeAllowedFileTypes:results]; } - // FIXME: Handle security scoped URLs instead of copying resource - bool asCopy = [&]{ - switch (fileDialog->options()->fileMode()) { - case QFileDialogOptions::AnyFile: - case QFileDialogOptions::ExistingFile: - case QFileDialogOptions::ExistingFiles: - return true; - default: - // Folders can't be imported - return false; - } - }(); - if (!docTypes.count) { - switch (fileDialog->options()->fileMode()) { + switch (options->fileMode()) { case QFileDialogOptions::AnyFile: case QFileDialogOptions::ExistingFile: case QFileDialogOptions::ExistingFiles: @@ -58,17 +48,39 @@ } } - if (self = [super initForOpeningContentTypes:docTypes asCopy:asCopy]) { - m_fileDialog = fileDialog; - self.modalPresentationStyle = UIModalPresentationFormSheet; - self.delegate = self; - self.presentationController.delegate = self; + if (options->acceptMode() == QFileDialogOptions::AcceptSave) { + auto selectedUrls = options->initiallySelectedFiles(); + auto suggestedFileName = !selectedUrls.isEmpty() ? selectedUrls.first().fileName() : "Untitled"; - if (m_fileDialog->options()->fileMode() == QFileDialogOptions::ExistingFiles) + // Create an empty dummy file, so that the export dialog will allow us + // to choose the export destination, which we are then given access to + // write to. + NSURL *dummyExportFile = [NSFileManager.defaultManager.temporaryDirectory + URLByAppendingPathComponent:suggestedFileName.toNSString()]; + [NSFileManager.defaultManager createFileAtPath:dummyExportFile.path contents:nil attributes:nil]; + + if (!(self = [super initForExportingURLs:@[dummyExportFile]])) + return nil; + + // Note, we don't set the directoryURL, as if the directory can't be + // accessed, or written to, the file dialog is shown but is empty. + // FIXME: See comment below for open dialogs as well + } else { + if (!(self = [super initForOpeningContentTypes:docTypes asCopy:NO])) + return nil; + + if (options->fileMode() == QFileDialogOptions::ExistingFiles) self.allowsMultipleSelection = YES; - self.directoryURL = m_fileDialog->options()->initialDirectory().toNSURL(); + // FIXME: This doesn't seem to have any effect + self.directoryURL = options->initialDirectory().toNSURL(); } + + m_fileDialog = fileDialog; + self.modalPresentationStyle = UIModalPresentationFormSheet; + self.delegate = self; + self.presentationController.delegate = self; + return self; } @@ -81,7 +93,7 @@ QList<QUrl> files; for (NSURL* url in urls) - files.append(QUrl::fromNSURL(url)); + files.append(qt_apple_urlFromPossiblySecurityScopedURL(url)); m_fileDialog->selectedFilesChanged(files); emit m_fileDialog->accept(); diff --git a/src/plugins/platforms/ios/qiosfiledialog.mm b/src/plugins/platforms/ios/qiosfiledialog.mm index b7d3e488bbb..6e7c10117ed 100644 --- a/src/plugins/platforms/ios/qiosfiledialog.mm +++ b/src/plugins/platforms/ios/qiosfiledialog.mm @@ -49,14 +49,10 @@ bool QIOSFileDialog::show(Qt::WindowFlags windowFlags, Qt::WindowModality window // when converted to QUrl, it becames a scheme. const QString scheme = initialDir.scheme(); - if (acceptOpen) { - if (directory.startsWith("assets-library:"_L1) || scheme == "assets-library"_L1) - return showImagePickerDialog(parent); - else - return showNativeDocumentPickerDialog(parent); - } + if (acceptOpen && (directory.startsWith("assets-library:"_L1) || scheme == "assets-library"_L1)) + return showImagePickerDialog(parent); - return false; + return showNativeDocumentPickerDialog(parent); } void QIOSFileDialog::showImagePickerDialog_helper(QWindow *parent) diff --git a/src/plugins/platforms/wasm/qwasminputcontext.cpp b/src/plugins/platforms/wasm/qwasminputcontext.cpp index a0546fdc215..6dfb4284149 100644 --- a/src/plugins/platforms/wasm/qwasminputcontext.cpp +++ b/src/plugins/platforms/wasm/qwasminputcontext.cpp @@ -24,13 +24,13 @@ using namespace qstdweb; void QWasmInputContext::inputCallback(emscripten::val event) { - qCDebug(qLcQpaWasmInputContext) << Q_FUNC_INFO << "isComposing : " << event["isComposing"].as<bool>(); - emscripten::val inputType = event["inputType"]; if (inputType.isNull() || inputType.isUndefined()) return; const auto inputTypeString = inputType.as<std::string>(); + // also may be dataTransfer + // containing rich text emscripten::val inputData = event["data"]; QString inputStr = (!inputData.isNull() && !inputData.isUndefined()) ? QString::fromEcmaString(inputData) : QString(); @@ -44,10 +44,10 @@ void QWasmInputContext::inputCallback(emscripten::val event) QInputMethodQueryEvent queryEvent(Qt::ImQueryAll); QCoreApplication::sendEvent(m_focusObject, &queryEvent); int cursorPosition = queryEvent.value(Qt::ImCursorPosition).toInt(); - int deleteLength = rangesPair.second - rangesPair.first; int deleteFrom = -1; - if (cursorPosition > rangesPair.first) { + + if (cursorPosition >= rangesPair.first) { deleteFrom = -(cursorPosition - rangesPair.first); } QInputMethodEvent e; @@ -65,21 +65,55 @@ void QWasmInputContext::inputCallback(emscripten::val event) event.call<void>("stopImmediatePropagation"); return; } else if (!inputTypeString.compare("insertCompositionText")) { - qCDebug(qLcQpaWasmInputContext) << "inputString : " << inputStr; - insertPreedit(); + qCDebug(qLcQpaWasmInputContext) << "insertCompositionText : " << inputStr; + event.call<void>("stopImmediatePropagation"); + + QInputMethodQueryEvent queryEvent(Qt::ImQueryAll); + QCoreApplication::sendEvent(m_focusObject, &queryEvent); + + int qCursorPosition = queryEvent.value(Qt::ImCursorPosition).toInt() ; + int replaceIndex = (qCursorPosition - rangesPair.first); + int replaceLength = rangesPair.second - rangesPair.first; + + setPreeditString(inputStr, replaceIndex); + insertPreedit(replaceLength); + + rangesPair.first = 0; + rangesPair.second = 0; event.call<void>("stopImmediatePropagation"); return; } else if (!inputTypeString.compare("insertReplacementText")) { - qCDebug(qLcQpaWasmInputContext) << "inputString : " << inputStr; - //auto ranges = event.call<emscripten::val>("getTargetRanges"); - //qCDebug(qLcQpaWasmInputContext) << ranges["length"].as<int>(); - // WA For Korean IME - // insertReplacementText should have targetRanges but - // Safari cannot have it and just it seems to be supposed - // to replace previous input. - insertText(inputStr, true); + // the previous input string up to the space, needs replaced with this + // used on iOS when continuing composition after focus change + // there's no range given + + qCDebug(qLcQpaWasmInputContext) << "insertReplacementText >>>>" << "inputString : " << inputStr; + emscripten::val ranges = event.call<emscripten::val>("getTargetRanges"); + + m_preeditString.clear(); + std::string elementString = m_inputElement["value"].as<std::string>(); + QInputMethodQueryEvent queryEvent(Qt::ImQueryAll); + QCoreApplication::sendEvent(m_focusObject, &queryEvent); + QString textFieldString = queryEvent.value(Qt::ImTextBeforeCursor).toString(); + int qCursorPosition = queryEvent.value(Qt::ImCursorPosition).toInt(); + + if (rangesPair.first != 0 || rangesPair.second != 0) { + + int replaceIndex = (qCursorPosition - rangesPair.first); + int replaceLength = rangesPair.second - rangesPair.first; + replaceText(inputStr, -replaceIndex, replaceLength); + rangesPair.first = 0; + rangesPair.second = 0; + + } else { + int spaceIndex = textFieldString.lastIndexOf(' ') + 1; + int replaceIndex = (qCursorPosition - spaceIndex); + + replaceText(inputStr, -replaceIndex, replaceIndex); + } event.call<void>("stopImmediatePropagation"); + return; } else if (!inputTypeString.compare("deleteCompositionText")) { setPreeditString("", 0); @@ -92,7 +126,25 @@ void QWasmInputContext::inputCallback(emscripten::val event) event.call<void>("stopImmediatePropagation"); return; } else if (!inputTypeString.compare("insertText")) { - insertText(inputStr); + if ((rangesPair.first != 0 || rangesPair.second != 0) + && rangesPair.first != rangesPair.second) { + + QInputMethodQueryEvent queryEvent(Qt::ImQueryAll); + QCoreApplication::sendEvent(m_focusObject, &queryEvent); + + int qCursorPosition = queryEvent.value(Qt::ImCursorPosition).toInt(); + int replaceIndex = (qCursorPosition - rangesPair.first); + int replaceLength = rangesPair.second - rangesPair.first; + + replaceText(inputStr, -replaceIndex, replaceLength); + + rangesPair.first = 0; + rangesPair.second = 0; + + } else { + insertText(inputStr); + } + event.call<void>("stopImmediatePropagation"); #if QT_CONFIG(clipboard) } else if (!inputTypeString.compare("insertFromPaste")) { @@ -112,9 +164,8 @@ void QWasmInputContext::inputCallback(emscripten::val event) void QWasmInputContext::compositionEndCallback(emscripten::val event) { const auto inputStr = QString::fromEcmaString(event["data"]); - qCDebug(qLcQpaWasmInputContext) << Q_FUNC_INFO << inputStr; - if (preeditString().isEmpty()) + if (preeditString().isEmpty()) // we get final results from inputCallback return; if (inputStr != preeditString()) { @@ -127,27 +178,11 @@ void QWasmInputContext::compositionEndCallback(emscripten::val event) void QWasmInputContext::compositionStartCallback(emscripten::val event) { - Q_UNUSED(event); - qCDebug(qLcQpaWasmInputContext) << Q_FUNC_INFO; + Q_UNUSED(event); // Do nothing when starting composition } -/* -// Test implementation -static void beforeInputCallback(emscripten::val event) -{ - qCDebug(qLcQpaWasmInputContext) << Q_FUNC_INFO; - - auto ranges = event.call<emscripten::val>("getTargetRanges"); - auto length = ranges["length"].as<int>(); - for (auto i = 0; i < length; i++) { - qCDebug(qLcQpaWasmInputContext) << ranges.call<emscripten::val>("get", i)["startOffset"].as<int>(); - qCDebug(qLcQpaWasmInputContext) << ranges.call<emscripten::val>("get", i)["endOffset"].as<int>(); - } -} -*/ - void QWasmInputContext::compositionUpdateCallback(emscripten::val event) { const auto compositionStr = QString::fromEcmaString(event["data"]); @@ -317,18 +352,21 @@ void QWasmInputContext::hideInputPanel() void QWasmInputContext::setPreeditString(QString preeditStr, int replaceSize) { + qCDebug(qLcQpaWasmInputContext) << Q_FUNC_INFO << preeditStr << replaceSize; m_preeditString = preeditStr; - m_replaceSize = replaceSize; + m_replaceIndex = replaceSize; } -void QWasmInputContext::insertPreedit() +void QWasmInputContext::insertPreedit(int replaceLength) { qCDebug(qLcQpaWasmInputContext) << Q_FUNC_INFO << m_preeditString; + if (replaceLength == 0) + replaceLength = m_preeditString.length(); QList<QInputMethodEvent::Attribute> attributes; { QInputMethodEvent::Attribute attr_cursor(QInputMethodEvent::Cursor, - m_preeditString.length(), + 0, 1); attributes.append(attr_cursor); @@ -336,21 +374,19 @@ void QWasmInputContext::insertPreedit() format.setFontUnderline(true); format.setUnderlineStyle(QTextCharFormat::SingleUnderline); QInputMethodEvent::Attribute attr_format(QInputMethodEvent::TextFormat, - 0, - m_preeditString.length(), format); + 0, + replaceLength, format); attributes.append(attr_format); } QInputMethodEvent e(m_preeditString, attributes); - if (m_replaceSize > 0) - e.setCommitString("", -m_replaceSize, m_replaceSize); + if (m_replaceIndex > 0) + e.setCommitString("", -m_replaceIndex, replaceLength); QCoreApplication::sendEvent(m_focusObject, &e); } void QWasmInputContext::commitPreeditAndClear() { - qCDebug(qLcQpaWasmInputContext) << Q_FUNC_INFO << m_preeditString; - if (m_preeditString.isEmpty()) return; QInputMethodEvent e; @@ -360,7 +396,8 @@ void QWasmInputContext::commitPreeditAndClear() } void QWasmInputContext::insertText(QString inputStr, bool replace) -{ +{ // commitString + qCDebug(qLcQpaWasmInputContext) << Q_FUNC_INFO << inputStr << replace; Q_UNUSED(replace); if (!inputStr.isEmpty()) { const int replaceLen = 0; @@ -370,4 +407,35 @@ void QWasmInputContext::insertText(QString inputStr, bool replace) } } +/* This will replace the text in the focusobject at replaceFrom position, and replaceSize length + with the text in inputStr. */ + + void QWasmInputContext::replaceText(QString inputStr, int replaceFrom, int replaceSize) + { + qCDebug(qLcQpaWasmInputContext) << Q_FUNC_INFO << inputStr << replaceFrom << replaceSize; + + QList<QInputMethodEvent::Attribute> attributes; + { + QInputMethodEvent::Attribute attr_cursor(QInputMethodEvent::Cursor, + 0, // start + 1); // length + attributes.append(attr_cursor); + + QTextCharFormat format; + format.setFontUnderline(true); + format.setUnderlineStyle(QTextCharFormat::SingleUnderline); + QInputMethodEvent::Attribute attr_format(QInputMethodEvent::TextFormat, + 0, + replaceSize, + format); + attributes.append(attr_format); + } + + QInputMethodEvent e1(QString(), attributes); + e1.setCommitString(inputStr, replaceFrom, replaceSize); + QCoreApplication::sendEvent(m_focusObject, &e1); + + m_preeditString.clear(); + } + QT_END_NAMESPACE diff --git a/src/plugins/platforms/wasm/qwasminputcontext.h b/src/plugins/platforms/wasm/qwasminputcontext.h index 97415451b2a..006a03455d7 100644 --- a/src/plugins/platforms/wasm/qwasminputcontext.h +++ b/src/plugins/platforms/wasm/qwasminputcontext.h @@ -33,10 +33,11 @@ public: const QString preeditString() { return m_preeditString; } void setPreeditString(QString preeditStr, int replaceSize); - void insertPreedit(); + void insertPreedit(int repalcementLength = 0); void commitPreeditAndClear(); void insertText(QString inputStr, bool replace = false); + void replaceText(QString inputString, int replaceFrom, int replaceSize); bool usingTextInput() const { return m_inputMethodAccepted; } void setFocusObject(QObject *object) override; @@ -58,7 +59,7 @@ private: private: QString m_preeditString; - int m_replaceSize = 0; + int m_replaceIndex = 0; bool m_inputMethodAccepted = false; QObject *m_focusObject = nullptr; diff --git a/src/plugins/platforms/wasm/qwasmwindow.cpp b/src/plugins/platforms/wasm/qwasmwindow.cpp index a88299975d0..d318c977a90 100644 --- a/src/plugins/platforms/wasm/qwasmwindow.cpp +++ b/src/plugins/platforms/wasm/qwasmwindow.cpp @@ -761,12 +761,10 @@ void QWasmWindow::handleCompositionEndEvent(emscripten::val event) void QWasmWindow::handleBeforeInputEvent(emscripten::val event) { - qWarning() << Q_FUNC_INFO; - if (QWasmInputContext *inputContext = QWasmIntegration::get()->wasmInputContext(); inputContext->isActive()) inputContext->beforeInputCallback(event); - // else - // m_focusHelper.set("innerHTML", std::string()); + else + m_focusHelper.set("innerHTML", std::string()); } void QWasmWindow::handlePointerEnterLeaveEvent(const PointerEvent &event) diff --git a/src/plugins/platforms/wayland/qwaylandinputcontext.cpp b/src/plugins/platforms/wayland/qwaylandinputcontext.cpp index 5ab285ad97d..0ccc4dba57a 100644 --- a/src/plugins/platforms/wayland/qwaylandinputcontext.cpp +++ b/src/plugins/platforms/wayland/qwaylandinputcontext.cpp @@ -192,12 +192,10 @@ void QWaylandInputContext::setFocusObject(QObject *object) if (window && window->handle()) { if (mCurrentWindow.data() != window) { if (!inputMethodAccepted()) { - if (mCurrentWindow) { - auto *surface = static_cast<QWaylandWindow *>(mCurrentWindow->handle())->wlSurface(); - if (surface) - inputInterface->disableSurface(surface); - mCurrentWindow.clear(); - } + auto *surface = static_cast<QWaylandWindow *>(window->handle())->wlSurface(); + if (surface) + inputInterface->disableSurface(surface); + mCurrentWindow.clear(); } else { auto *surface = static_cast<QWaylandWindow *>(window->handle())->wlSurface(); if (surface) { diff --git a/src/plugins/platforms/windows/qwindowsscreen.cpp b/src/plugins/platforms/windows/qwindowsscreen.cpp index 2bd2f0c9e3d..0236669d6fb 100644 --- a/src/plugins/platforms/windows/qwindowsscreen.cpp +++ b/src/plugins/platforms/windows/qwindowsscreen.cpp @@ -704,7 +704,7 @@ void QWindowsScreenManager::initialize() qCDebug(lcQpaScreen) << "Initializing screen manager"; auto className = QWindowsWindowClassRegistry::instance()->registerWindowClass( - QLatin1String("ScreenChangeObserverWindow"), + "ScreenChangeObserverWindow"_L1, qDisplayChangeObserverWndProc); // HWND_MESSAGE windows do not get WM_DISPLAYCHANGE, so we need to create diff --git a/src/plugins/platforms/windows/qwindowstheme.cpp b/src/plugins/platforms/windows/qwindowstheme.cpp index d132bbb6130..b9f60f7713c 100644 --- a/src/plugins/platforms/windows/qwindowstheme.cpp +++ b/src/plugins/platforms/windows/qwindowstheme.cpp @@ -549,7 +549,7 @@ QWindowsTheme::QWindowsTheme() refreshIconPixmapSizes(); auto className = QWindowsWindowClassRegistry::instance()->registerWindowClass( - QLatin1String("ThemeChangeObserverWindow"), + "ThemeChangeObserverWindow"_L1, qThemeChangeObserverWndProc); // HWND_MESSAGE windows do not get the required theme events, // so we use a real top-level window that we never show. diff --git a/src/plugins/platforms/windows/qwindowswindow.cpp b/src/plugins/platforms/windows/qwindowswindow.cpp index ed391009423..b77e985c965 100644 --- a/src/plugins/platforms/windows/qwindowswindow.cpp +++ b/src/plugins/platforms/windows/qwindowswindow.cpp @@ -61,6 +61,8 @@ QT_BEGIN_NAMESPACE +using namespace Qt::StringLiterals; + using QWindowCreationContextPtr = QSharedPointer<QWindowCreationContext>; enum { @@ -889,7 +891,7 @@ QWindowsWindowData const QString windowClassName = QWindowsWindowClassRegistry::instance()->registerWindowClass(w); QWindowsWindowClassDescription windowTitlebarDescription; - windowTitlebarDescription.name = QStringLiteral("_q_titlebar"); + windowTitlebarDescription.name = "_q_titlebar"_L1; windowTitlebarDescription.style = CS_VREDRAW | CS_HREDRAW; windowTitlebarDescription.shouldAddPrefix = false; const QString windowTitlebarName = QWindowsWindowClassRegistry::instance()->registerWindowClass(windowTitlebarDescription); diff --git a/src/plugins/platforms/windows/qwindowswindowclassdescription.cpp b/src/plugins/platforms/windows/qwindowswindowclassdescription.cpp index 63e16260b62..e2e46a7b215 100644 --- a/src/plugins/platforms/windows/qwindowswindowclassdescription.cpp +++ b/src/plugins/platforms/windows/qwindowswindowclassdescription.cpp @@ -75,4 +75,14 @@ QWindowsWindowClassDescription QWindowsWindowClassDescription::fromWindow(const return description; } +QDebug operator<<(QDebug dbg, const QWindowsWindowClassDescription &description) +{ + dbg << description.name + << " style=0x" << Qt::hex << description.style << Qt::dec + << " brush=" << description.brush + << " hasIcon=" << description.hasIcon; + + return dbg; +} + QT_END_NAMESPACE diff --git a/src/plugins/platforms/windows/qwindowswindowclassdescription.h b/src/plugins/platforms/windows/qwindowswindowclassdescription.h index 9423abf9d2d..3acca65b8a2 100644 --- a/src/plugins/platforms/windows/qwindowswindowclassdescription.h +++ b/src/plugins/platforms/windows/qwindowswindowclassdescription.h @@ -23,6 +23,9 @@ struct QWindowsWindowClassDescription HBRUSH brush{ nullptr }; bool hasIcon{ false }; bool shouldAddPrefix{ true }; + +private: + friend QDebug operator<<(QDebug dbg, const QWindowsWindowClassDescription &description); }; QT_END_NAMESPACE diff --git a/src/plugins/platforms/windows/qwindowswindowclassregistry.cpp b/src/plugins/platforms/windows/qwindowswindowclassregistry.cpp index c330720a09c..9c9ffcfeefa 100644 --- a/src/plugins/platforms/windows/qwindowswindowclassregistry.cpp +++ b/src/plugins/platforms/windows/qwindowswindowclassregistry.cpp @@ -114,9 +114,9 @@ QString QWindowsWindowClassRegistry::registerWindowClass(const QWindowsWindowCla qPrintable(className)); m_registeredWindowClassNames.insert(className); - qCDebug(lcQpaWindowClass).nospace() << __FUNCTION__ << ' ' << className - << " style=0x" << Qt::hex << description.style << Qt::dec - << " brush=" << description.brush << " icon=" << description.hasIcon << " atom=" << atom; + + qCDebug(lcQpaWindowClass).nospace() << __FUNCTION__ << ' ' << className << ' ' << description << " atom=" << atom; + return className; } diff --git a/src/plugins/styles/modernwindows/qwindows11style.cpp b/src/plugins/styles/modernwindows/qwindows11style.cpp index bf4b3c6a9bc..ffba4f775c8 100644 --- a/src/plugins/styles/modernwindows/qwindows11style.cpp +++ b/src/plugins/styles/modernwindows/qwindows11style.cpp @@ -24,6 +24,7 @@ #if QT_CONFIG(mdiarea) #include <QtWidgets/qmdiarea.h> #endif +#include <QtWidgets/qplaintextedit.h> #include <QtWidgets/qtextedit.h> #include <QtWidgets/qtreeview.h> #if QT_CONFIG(datetimeedit) @@ -1027,7 +1028,9 @@ void QWindows11Style::drawPrimitive(PrimitiveElement element, const QStyleOption if (frame->frameShape == QFrame::NoFrame) break; - drawLineEditFrame(painter, rect, option, qobject_cast<const QTextEdit *>(widget) != nullptr); + const bool isEditable = qobject_cast<const QTextEdit *>(widget) != nullptr + || qobject_cast<const QPlainTextEdit *>(widget) != nullptr; + drawLineEditFrame(painter, rect, option, isEditable); } break; } @@ -1452,36 +1455,10 @@ void QWindows11Style::drawControl(ControlElement element, const QStyleOption *op #endif // QT_CONFIG(progressbar) case CE_PushButtonLabel: if (const QStyleOptionButton *btn = qstyleoption_cast<const QStyleOptionButton *>(option)) { - using namespace StyleOptionHelper; - const bool isEnabled = !isDisabled(option); - - QRect textRect = btn->rect.marginsRemoved(QMargins(contentHMargin, 0, contentHMargin, 0)); - int tf = Qt::AlignCenter | Qt::TextShowMnemonic; - if (!proxy()->styleHint(SH_UnderlineShortcut, btn, widget)) - tf |= Qt::TextHideMnemonic; - - if (!btn->icon.isNull()) { - //Center both icon and text - QIcon::Mode mode = isEnabled ? QIcon::Normal : QIcon::Disabled; - if (mode == QIcon::Normal && btn->state & State_HasFocus) - mode = QIcon::Active; - QIcon::State state = isChecked(btn) ? QIcon::On : QIcon::Off; - - int iconSpacing = 4;//### 4 is currently hardcoded in QPushButton::sizeHint() - - QRect iconRect = QRect(textRect.x(), textRect.y(), btn->iconSize.width(), textRect.height()); - QRect vIconRect = visualRect(btn->direction, btn->rect, iconRect); - textRect.setLeft(textRect.left() + iconRect.width() + iconSpacing); - - if (isChecked(btn) || isPressed(btn)) - vIconRect.translate(proxy()->pixelMetric(PM_ButtonShiftHorizontal, option, widget), - proxy()->pixelMetric(PM_ButtonShiftVertical, option, widget)); - btn->icon.paint(painter, vIconRect, Qt::AlignCenter, mode, state); - } - - auto vTextRect = visualRect(btn->direction, btn->rect, textRect); - painter->setPen(controlTextColor(option)); - proxy()->drawItemText(painter, vTextRect, tf, option->palette, isEnabled, btn->text); + QStyleOptionButton btnCopy(*btn); + btnCopy.rect = btn->rect.marginsRemoved(QMargins(contentHMargin, 0, contentHMargin, 0)); + btnCopy.palette.setBrush(QPalette::ButtonText, controlTextColor(option)); + QCommonStyle::drawControl(element, &btnCopy, painter, widget); } break; case CE_PushButtonBevel: @@ -2625,7 +2602,7 @@ QIcon QWindows11Style::standardIcon(StandardPixmap standardIcon, switch (standardIcon) { case SP_LineEditClearButton: { if (d->m_lineEditClearButton.isNull()) { - auto e = new WinFontIconEngine(Clear.at(0), d->assetFont); + auto e = new WinFontIconEngine(Clear, d->assetFont); d->m_lineEditClearButton = QIcon(e); } return d->m_lineEditClearButton; diff --git a/tests/auto/corelib/kernel/qvariant/tst_qvariant.cpp b/tests/auto/corelib/kernel/qvariant/tst_qvariant.cpp index 9be046c75be..b05a055252b 100644 --- a/tests/auto/corelib/kernel/qvariant/tst_qvariant.cpp +++ b/tests/auto/corelib/kernel/qvariant/tst_qvariant.cpp @@ -397,6 +397,7 @@ private slots: void iterateAssociativeContainerElements_data(); void iterateAssociativeContainerElements() { runTestFunction(); } void iterateContainerElements(); + void emptyContainerInterface(); void pairElements_data(); void pairElements() { runTestFunction(); } @@ -5324,6 +5325,26 @@ void tst_QVariant::iterateContainerElements() } } +void tst_QVariant::emptyContainerInterface() +{ + // An empty container interface should implicitly be of invalid size + // and its begin and end iterators should be equal. + + const QtMetaContainerPrivate::QMetaContainerInterface emptyContainerInterface {}; + QIterable emptyIterable(QMetaContainer(&emptyContainerInterface), nullptr); + + QCOMPARE(emptyIterable.size(), -1); + auto constBegin = emptyIterable.constBegin(); + auto constEnd = emptyIterable.constEnd(); + QVERIFY(constBegin == constEnd); + QCOMPARE(constEnd - constBegin, 0); + + auto mutableBegin = emptyIterable.mutableBegin(); + auto mutableEnd = emptyIterable.mutableEnd(); + QVERIFY(mutableBegin == mutableEnd); + QCOMPARE(mutableEnd - mutableBegin, 0); +} + template <typename Pair> static void testVariantPairElements() { QFETCH(std::function<void(void *)>, makeValue); diff --git a/tests/auto/gui/image/qimagereader/images/image16.pgm b/tests/auto/gui/image/qimagereader/images/image16.pgm new file mode 100644 index 00000000000..4e0b55131b0 --- /dev/null +++ b/tests/auto/gui/image/qimagereader/images/image16.pgm @@ -0,0 +1,260 @@ +P2 +16 +16 +65535 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +65535 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 +32767 diff --git a/tests/auto/gui/image/qimagereader/tst_qimagereader.cpp b/tests/auto/gui/image/qimagereader/tst_qimagereader.cpp index de9fea78ea6..8ccaf435f0b 100644 --- a/tests/auto/gui/image/qimagereader/tst_qimagereader.cpp +++ b/tests/auto/gui/image/qimagereader/tst_qimagereader.cpp @@ -610,6 +610,7 @@ void tst_QImageReader::imageFormat_data() QTest::newRow("pbm") << QString("image.pbm") << QByteArray("pbm") << QImage::Format_Mono; QTest::newRow("pgm") << QString("image.pgm") << QByteArray("pgm") << QImage::Format_Grayscale8; + QTest::newRow("pgm") << QString("image16.pgm") << QByteArray("pgm") << QImage::Format_Grayscale16; QTest::newRow("ppm-1") << QString("image.ppm") << QByteArray("ppm") << QImage::Format_RGB32; QTest::newRow("ppm-2") << QString("teapot.ppm") << QByteArray("ppm") << QImage::Format_RGB32; QTest::newRow("ppm-3") << QString("runners.ppm") << QByteArray("ppm") << QImage::Format_RGB32; diff --git a/tests/auto/gui/kernel/qwindow/BLACKLIST b/tests/auto/gui/kernel/qwindow/BLACKLIST index 1ef54f0bfbf..55003c7ec18 100644 --- a/tests/auto/gui/kernel/qwindow/BLACKLIST +++ b/tests/auto/gui/kernel/qwindow/BLACKLIST @@ -25,5 +25,6 @@ android windows-10 windows-11 android +macos-26 # QTBUG-142157 [stateChangeSignal] macos # QTBUG-140388 diff --git a/tests/auto/network/access/qhttp2connection/tst_qhttp2connection.cpp b/tests/auto/network/access/qhttp2connection/tst_qhttp2connection.cpp index 8e8c90e14de..417655c31d9 100644 --- a/tests/auto/network/access/qhttp2connection/tst_qhttp2connection.cpp +++ b/tests/auto/network/access/qhttp2connection/tst_qhttp2connection.cpp @@ -8,6 +8,8 @@ #include <QtNetwork/private/hpack_p.h> #include <QtNetwork/private/bitstreams_p.h> +#include <QtCore/qregularexpression.h> + #include <limits> using namespace Qt::StringLiterals; @@ -35,6 +37,8 @@ private slots: void connectToServer(); void WINDOW_UPDATE(); void testCONTINUATIONFrame(); + void goaway_data(); + void goaway(); private: enum PeerType { Client, Server }; @@ -1051,6 +1055,112 @@ void tst_QHttp2Connection::testCONTINUATIONFrame() } } +void tst_QHttp2Connection::goaway_data() +{ + QTest::addColumn<bool>("endStreamOnHEADERS"); + QTest::addColumn<bool>("createNewStreamAfterDelay"); + QTest::addRow("end-on-headers") << true << false; + QTest::addRow("end-after-data") << false << false; + QTest::addRow("end-after-new-late-stream") << false << true; +} + +void tst_QHttp2Connection::goaway() +{ + QFETCH(const bool, endStreamOnHEADERS); + QFETCH(const bool, createNewStreamAfterDelay); + auto [client, server] = makeFakeConnectedSockets(); + auto connection = makeHttp2Connection(client.get(), {}, Client); + auto serverConnection = makeHttp2Connection(server.get(), {}, Server); + + QHttp2Stream *clientStream = connection->createStream().unwrap(); + QVERIFY(clientStream); + QVERIFY(waitForSettingsExchange(connection, serverConnection)); + + QSignalSpy newIncomingStreamSpy{ serverConnection, &QHttp2Connection::newIncomingStream }; + + QSignalSpy clientIncomingStreamSpy{ connection, &QHttp2Connection::newIncomingStream }; + QSignalSpy clientHeaderReceivedSpy{ clientStream, &QHttp2Stream::headersReceived }; + QSignalSpy clientGoawaySpy{ connection, &QHttp2Connection::receivedGOAWAY }; + + const HPack::HttpHeader headers = getRequiredHeaders(); + clientStream->sendHEADERS(headers, false); + + QVERIFY(newIncomingStreamSpy.wait()); + auto *serverStream = newIncomingStreamSpy.front().front().value<QHttp2Stream *>(); + QVERIFY(serverStream); + QVERIFY(serverConnection->sendGOAWAY(Http2::CANCEL)); + auto createStreamResult = serverConnection->createLocalStreamInternal(); + QVERIFY(createStreamResult.has_error()); + QCOMPARE(createStreamResult.error(), QHttp2Connection::CreateStreamError::ReceivedGOAWAY); + + QVERIFY(clientGoawaySpy.wait()); + QCOMPARE(clientGoawaySpy.size(), 1); + // The error code used: + QCOMPARE(clientGoawaySpy.first().first().value<Http2::Http2Error>(), Http2::CANCEL); + // Last ID that will be processed + QCOMPARE(clientGoawaySpy.first().last().value<quint32>(), clientStream->streamID()); + clientGoawaySpy.clear(); + + // Test that creating a stream the normal way results in an error: + QH2Expected<QHttp2Stream *, QHttp2Connection::CreateStreamError> + invalidStream = connection->createStream(); + QVERIFY(!invalidStream.ok()); + QVERIFY(invalidStream.has_error()); + QCOMPARE(invalidStream.error(), QHttp2Connection::CreateStreamError::ReceivedGOAWAY); + + // Directly create a stream to avoid the GOAWAY check: + quint32 nextStreamId = clientStream->streamID() + 2; + QHttp2Stream *secondClientStream = connection->createStreamInternal_impl(nextStreamId); + QSignalSpy streamResetSpy{ secondClientStream, &QHttp2Stream::rstFrameReceived }; + secondClientStream->sendHEADERS(headers, endStreamOnHEADERS); + // The stream should be ignored: + using namespace std::chrono_literals; + QVERIFY(!streamResetSpy.wait(100ms)); // We don't get reset because we are ignored + if (endStreamOnHEADERS) + return; + + secondClientStream->sendDATA("my data", createNewStreamAfterDelay); + // We cheat and try to send data after the END_STREAM flag has been sent + if (!createNewStreamAfterDelay) { + // Manually send a frame with END_STREAM so the QHttp2Stream thinks it's fine to send more + // DATA + connection->frameWriter.start(Http2::FrameType::DATA, Http2::FrameFlag::END_STREAM, + secondClientStream->streamID()); + connection->frameWriter.write(*connection->getSocket()); + QVERIFY(!streamResetSpy.wait(100ms)); // We don't get reset because we are ignored + + // Even without the GOAWAY this should fail (more activity after END_STREAM) + secondClientStream->sendDATA("my data", true); + QTest::ignoreMessage(QtCriticalMsg, + QRegularExpression(u".*Connection error: DATA on invalid stream.*"_s)); + QVERIFY(clientGoawaySpy.wait()); + QCOMPARE(clientGoawaySpy.size(), 1); + QCOMPARE(clientGoawaySpy.first().first().value<Http2::Http2Error>(), + Http2::ENHANCE_YOUR_CALM); + QCOMPARE(clientGoawaySpy.first().last().value<quint32>(), clientStream->streamID()); + return; // connection is dead by now + } + + // Override the deadline timer so we don't have to wait too long + serverConnection->m_goawayGraceTimer.setRemainingTime(50ms); + + // We can create the stream whenever, it is not noticed by the server until we send something. + nextStreamId += 2; + QHttp2Stream *rejectedStream = connection->createStreamInternal_impl(nextStreamId); + // Sleep until the grace period is over: + QTRY_VERIFY(serverConnection->m_goawayGraceTimer.hasExpired()); + + QVERIFY(rejectedStream->sendHEADERS(headers, true)); + + QTest::ignoreMessage(QtCriticalMsg, + QRegularExpression(u".*Connection error: Peer refused to GOAWAY\\..*"_s)); + QVERIFY(clientGoawaySpy.wait()); + QCOMPARE(clientGoawaySpy.size(), 1); + QCOMPARE(clientGoawaySpy.first().first().value<Http2::Http2Error>(), Http2::PROTOCOL_ERROR); + // The first stream is still the last processed one: + QCOMPARE(clientGoawaySpy.first().last().value<quint32>(), clientStream->streamID()); +} + QTEST_MAIN(tst_QHttp2Connection) #include "tst_qhttp2connection.moc" diff --git a/tests/auto/widgets/kernel/qwidget/BLACKLIST b/tests/auto/widgets/kernel/qwidget/BLACKLIST index dd2cb1dcee9..9651c1480c8 100644 --- a/tests/auto/widgets/kernel/qwidget/BLACKLIST +++ b/tests/auto/widgets/kernel/qwidget/BLACKLIST @@ -41,6 +41,9 @@ android android [hoverPosition] macos-14 x86 +macos-26 # QTBUG-142157 # QTBUG-124291 [setParentChangesFocus:make dialog parentless, after] android +[enterLeaveOnWindowShowHide] +macos-26 # QTBUG-142157 diff --git a/tests/manual/sandboxed_file_access/CMakeLists.txt b/tests/manual/sandboxed_file_access/CMakeLists.txt new file mode 100644 index 00000000000..8df09401cf9 --- /dev/null +++ b/tests/manual/sandboxed_file_access/CMakeLists.txt @@ -0,0 +1,71 @@ +# Copyright (C) 2025 The Qt Company Ltd. +# SPDX-License-Identifier: BSD-3-Clause +if(NOT QT_BUILD_STANDALONE_TESTS AND NOT QT_BUILDING_QT) + cmake_minimum_required(VERSION 3.16) + project(tst_manual_sandboxed_file_access LANGUAGES CXX) + find_package(Qt6BuildInternals REQUIRED COMPONENTS STANDALONE_TEST) +endif() + +qt_standard_project_setup() + +qt_add_executable(tst_manual_sandboxed_file_access + tst_sandboxed_file_access.cpp +) + +target_link_libraries(tst_manual_sandboxed_file_access PRIVATE + Qt::CorePrivate + Qt::Widgets + Qt::Test +) + +enable_language(OBJCXX) +set_source_files_properties(tst_sandboxed_file_access.cpp PROPERTIES LANGUAGE OBJCXX) + +if(MACOS) + target_sources(tst_manual_sandboxed_file_access PRIVATE app.entitlements) + set_target_properties(tst_manual_sandboxed_file_access PROPERTIES + MACOSX_BUNDLE TRUE + MACOSX_BUNDLE_GUI_IDENTIFIER "io.qt.dev.tst-manual-sandboxed-file-access" + XCODE_ATTRIBUTE_CODE_SIGN_ENTITLEMENTS "${CMAKE_CURRENT_SOURCE_DIR}/app.entitlements" + XCODE_ATTRIBUTE_COPY_PHASE_STRIP FALSE + ) + if(NOT CMAKE_GENERATOR STREQUAL "Xcode") + set_target_properties(tst_manual_sandboxed_file_access PROPERTIES + RESOURCE "${CMAKE_CURRENT_SOURCE_DIR}/app.entitlements" + ) + endif() + + set(platform_plugin "${QT6_INSTALL_PREFIX}/${QT6_INSTALL_PLUGINS}/platforms/libqcocoa.dylib") + target_sources(tst_manual_sandboxed_file_access PRIVATE ${platform_plugin}) + set_source_files_properties(${platform_plugin} + PROPERTIES + MACOSX_PACKAGE_LOCATION PlugIns/platforms + ) + + target_compile_definitions(tst_manual_sandboxed_file_access PRIVATE + QTEST_THROW_ON_FAIL + QTEST_THROW_ON_SKIP + ) +endif() + +if(IOS) + set(plist_path "${CMAKE_CURRENT_SOURCE_DIR}/Info.plist.ios") +else() + set(plist_path "${CMAKE_CURRENT_SOURCE_DIR}/Info.plist.macos") +endif() + +set_target_properties(tst_manual_sandboxed_file_access + PROPERTIES MACOSX_BUNDLE_INFO_PLIST "${plist_path}") + +install(TARGETS tst_manual_sandboxed_file_access + BUNDLE DESTINATION . + RUNTIME DESTINATION ${CMAKE_INSTALL_BINDIR} + LIBRARY DESTINATION ${CMAKE_INSTALL_LIBDIR} +) + +qt_generate_deploy_app_script( + TARGET tst_manual_sandboxed_file_access + OUTPUT_SCRIPT deploy_script + NO_UNSUPPORTED_PLATFORM_ERROR +) +install(SCRIPT ${deploy_script}) diff --git a/tests/manual/sandboxed_file_access/Info.plist.ios b/tests/manual/sandboxed_file_access/Info.plist.ios new file mode 100644 index 00000000000..c6072cffa92 --- /dev/null +++ b/tests/manual/sandboxed_file_access/Info.plist.ios @@ -0,0 +1,90 @@ +<?xml version="1.0" encoding="UTF-8"?> +<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> +<plist version="1.0"> +<dict> + <key>BuildMachineOSBuild</key> + <string>25B78</string> + <key>CFBundleAllowMixedLocalizations</key> + <true/> + <key>CFBundleDevelopmentRegion</key> + <string>en</string> + <key>CFBundleDisplayName</key> + <string>tst_manual_sandboxed_file_access</string> + <key>CFBundleExecutable</key> + <string>tst_manual_sandboxed_file_access</string> + <key>CFBundleIdentifier</key> + <string>io.qt.fb.tst-manual-sandboxed-file-access</string> + <key>CFBundleInfoDictionaryVersion</key> + <string>6.0</string> + <key>CFBundleName</key> + <string>tst_manual_sandboxed_file_access</string> + <key>CFBundlePackageType</key> + <string>APPL</string> + <key>CFBundleShortVersionString</key> + <string>6.0</string> + <key>CFBundleSupportedPlatforms</key> + <array> + <string>iPhoneOS</string> + </array> + <key>CFBundleVersion</key> + <string>6.0.0</string> + <key>DTCompiler</key> + <string>com.apple.compilers.llvm.clang.1_0</string> + <key>DTPlatformBuild</key> + <string>23B77</string> + <key>DTPlatformName</key> + <string>iphoneos</string> + <key>DTPlatformVersion</key> + <string>26.1</string> + <key>DTSDKBuild</key> + <string>23B77</string> + <key>DTSDKName</key> + <string>iphoneos26.1</string> + <key>DTXcode</key> + <string>2610</string> + <key>DTXcodeBuild</key> + <string>17B55</string> + <key>LSRequiresIPhoneOS</key> + <true/> + <key>MinimumOSVersion</key> + <string>17</string> + <key>NOTE</key> + <string>This file was generated by Qt's default CMake support.</string> + <key>UIDeviceFamily</key> + <array> + <integer>1</integer> + <integer>2</integer> + </array> + <key>UILaunchStoryboardName</key> + <string>LaunchScreen</string> + <key>UIRequiredDeviceCapabilities</key> + <array> + <string>arm64</string> + </array> + <key>UISupportedInterfaceOrientations</key> + <array> + <string>UIInterfaceOrientationPortrait</string> + <string>UIInterfaceOrientationPortraitUpsideDown</string> + <string>UIInterfaceOrientationLandscapeLeft</string> + <string>UIInterfaceOrientationLandscapeRight</string> + </array> + <key>CFBundleDocumentTypes</key> + <array> + <dict> + <key>CFBundleTypeRole</key> + <string>Editor</string> + <key>LSItemContentTypes</key> + <array> + <string>public.text</string> + </array> + <!-- These two don't seem to be needed to make things work --> + <key>LSHandlerRank</key> + <string>Default</string> + <key>CFBundleTypeName</key> + <string>Text files</string> + </dict> + </array> + <key>UISupportsDocumentBrowser</key> + <true/> +</dict> +</plist> diff --git a/tests/manual/sandboxed_file_access/Info.plist.macos b/tests/manual/sandboxed_file_access/Info.plist.macos new file mode 100644 index 00000000000..81a93f0353f --- /dev/null +++ b/tests/manual/sandboxed_file_access/Info.plist.macos @@ -0,0 +1,68 @@ +<?xml version="1.0" encoding="UTF-8"?> +<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> +<plist version="1.0"> +<dict> + <key>BuildMachineOSBuild</key> + <string>25B78</string> + <key>CFBundleAllowMixedLocalizations</key> + <true/> + <key>CFBundleDevelopmentRegion</key> + <string>en</string> + <key>CFBundleExecutable</key> + <string>tst_manual_sandboxed_file_access</string> + <key>CFBundleIdentifier</key> + <string>io.qt.dev.tst-manual-sandboxed-file-access</string> + <key>CFBundleInfoDictionaryVersion</key> + <string>6.0</string> + <key>CFBundleName</key> + <string>tst_manual_sandboxed_file_access</string> + <key>CFBundlePackageType</key> + <string>APPL</string> + <key>CFBundleShortVersionString</key> + <string>6.0</string> + <key>CFBundleSupportedPlatforms</key> + <array> + <string>MacOSX</string> + </array> + <key>CFBundleVersion</key> + <string>6.0.0</string> + <key>DTCompiler</key> + <string>com.apple.compilers.llvm.clang.1_0</string> + <key>DTPlatformBuild</key> + <string>25B74</string> + <key>DTPlatformName</key> + <string>macosx</string> + <key>DTPlatformVersion</key> + <string>26.1</string> + <key>DTSDKBuild</key> + <string>25B74</string> + <key>DTSDKName</key> + <string>macosx26.1</string> + <key>DTXcode</key> + <string>2610</string> + <key>DTXcodeBuild</key> + <string>17B55</string> + <key>LSMinimumSystemVersion</key> + <string>13</string> + <key>NSPrincipalClass</key> + <string>NSApplication</string> + <key>NSSupportsAutomaticGraphicsSwitching</key> + <true/> + <key>CFBundleDocumentTypes</key> + <array> + <dict> + <key>CFBundleTypeRole</key> + <string>Editor</string> + <key>LSItemContentTypes</key> + <array> + <string>public.text</string> + </array> + <!-- These two don't seem to be needed to make things work --> + <key>LSHandlerRank</key> + <string>Default</string> + <key>CFBundleTypeName</key> + <string>Text files</string> + </dict> + </array> +</dict> +</plist> diff --git a/tests/manual/sandboxed_file_access/app.entitlements b/tests/manual/sandboxed_file_access/app.entitlements new file mode 100644 index 00000000000..6d968edb4f8 --- /dev/null +++ b/tests/manual/sandboxed_file_access/app.entitlements @@ -0,0 +1,10 @@ +<?xml version="1.0" encoding="UTF-8"?> +<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> +<plist version="1.0"> +<dict> + <key>com.apple.security.app-sandbox</key> + <true/> + <key>com.apple.security.files.user-selected.read-write</key> + <true/> +</dict> +</plist> diff --git a/tests/manual/sandboxed_file_access/tst_sandboxed_file_access.cpp b/tests/manual/sandboxed_file_access/tst_sandboxed_file_access.cpp new file mode 100644 index 00000000000..18381ce0c8c --- /dev/null +++ b/tests/manual/sandboxed_file_access/tst_sandboxed_file_access.cpp @@ -0,0 +1,422 @@ +// Copyright (C) 2025 The Qt Company Ltd. +// SPDX-License-Identifier: LicenseRef-Qt-Commercial OR GPL-3.0-only + +#include <QtCore> +#include <QtWidgets> +#include <QtTest> + +#include <Foundation/Foundation.h> + +#if defined(Q_OS_MACOS) && defined(QT_BUILD_INTERNAL) +#include <private/qcore_mac_p.h> +Q_CONSTRUCTOR_FUNCTION(qt_mac_ensureResponsible); +#endif + +class tst_SandboxedFileAccess : public QObject +{ + Q_OBJECT + +private slots: + void initTestCase(); + void cleanupTestCase(); + + void alwaysAccessibleLocations(); + + void standardPaths_data(); + void standardPaths(); + + void readSingleFile(); + void writeSingleFile(); + void writeSingleFileNonCanonical(); + + void removeFile(); + void trashFile(); + + void readFileAfterRestart(); + + void directoryAccess(); + + void securityScopedTargetFile(); + + void fileOpenEvent(); + +private: + void writeFile(const QString &fileName); + QByteArray readFile(const QString &fileName); + + QString getFileName(QFileDialog::AcceptMode, QFileDialog::FileMode, + const QString &action = QString(), const QString &fileName = QString()); + + QString sandboxPath() const + { + return QStandardPaths::standardLocations(QStandardPaths::HomeLocation).first(); + } + + QString bundlePath() const + { + QString path = QCoreApplication::applicationDirPath(); +#if defined(Q_OS_MACOS) + path.remove("/Contents/MacOS"); +#endif + return path; + } + + QStringList m_persistedFileNames; + QPointer<QWidget> m_widget; +}; + +void tst_SandboxedFileAccess::initTestCase() +{ + qDebug() << "đĻ App bundle" << bundlePath(); + qDebug() << "đ App container" << sandboxPath(); + + m_widget = new QWidget; + m_widget->show(); + QVERIFY(QTest::qWaitForWindowExposed(m_widget)); +} + +void tst_SandboxedFileAccess::cleanupTestCase() +{ + NSURL *appSupportDir = QUrl::fromLocalFile(QStandardPaths::writableLocation(QStandardPaths::GenericDataLocation)).toNSURL(); + NSURL *bookmarksFile = [appSupportDir URLByAppendingPathComponent:@"SecurityScopedBookmarks.plist"]; + NSError *error = nullptr; + NSMutableDictionary *bookmarks = [[NSDictionary dictionaryWithContentsOfURL:bookmarksFile + error:&error] mutableCopy]; + for (NSString *path in bookmarks.allKeys) { + if (m_persistedFileNames.contains(QString::fromNSString(path))) { + qDebug() << "Keeping knowledge of persisted path" << path; + continue; + } + qDebug() << "Wiping knowledge of path" << path; + [bookmarks removeObjectForKey:path]; + } + [bookmarks writeToURL:bookmarksFile error:&error]; + + qGuiApp->quit(); +} + +void tst_SandboxedFileAccess::alwaysAccessibleLocations() +{ + readFile(QCoreApplication::applicationFilePath()); + + // The documents location is inside the sandbox and writable on both iOS and macOS + auto documents = QStandardPaths::writableLocation(QStandardPaths::DocumentsLocation); + writeFile(documents + "/test-writable-file.txt"); +} + +void tst_SandboxedFileAccess::standardPaths_data() +{ + QTest::addColumn<QStandardPaths::StandardLocation>("location"); + auto standardLocations = QMetaEnum::fromType<QStandardPaths::StandardLocation>(); + for (int i = 0; i < standardLocations.keyCount(); ++i) + QTest::newRow(standardLocations.key(i)) << QStandardPaths::StandardLocation(standardLocations.value(i)); +} + +void tst_SandboxedFileAccess::standardPaths() +{ + QFETCH(QStandardPaths::StandardLocation, location); + auto writableLocation = QStandardPaths::writableLocation(location); + + if (writableLocation.isEmpty()) + QSKIP("There's no writable location for this location"); + + QFileInfo info(writableLocation); + if (info.isSymLink() && !info.symLinkTarget().startsWith(sandboxPath())) + QSKIP("This location is a symlink to outside the sandbox and requires access"); + + QVERIFY(QDir().mkpath(writableLocation)); + +#if !defined(Q_OS_MACOS) + QEXPECT_FAIL("HomeLocation", "The sandbox root is not writable on iOS", Abort); +#endif + writeFile(writableLocation + QString("/test-writable-file-%1.txt").arg(QTest::currentDataTag())); +} + +void tst_SandboxedFileAccess::readSingleFile() +{ + QString filePath = getFileName(QFileDialog::AcceptOpen, + QFileDialog::ExistingFile, "Choose file to read"); + readFile(filePath); + + { + QFile file(QCoreApplication::applicationFilePath()); + QVERIFY(file.open(QFile::ReadOnly)); + QByteArray plistContent = file.read(100); + file.close(); + + // Check that setFileName can target a security scoped file + file.setFileName(filePath); + QVERIFY(file.open(QFile::ReadOnly)); + QVERIFY(file.isReadable()); + QCOMPARE_NE(file.read(100), plistContent); + } + + QDir dir; + QString fileName; + + { + QFileInfo info(filePath); + dir = info.path(); + fileName = info.fileName(); + QVERIFY(dir.exists()); + QVERIFY(!fileName.isEmpty()); + } + + // Check that we're able to access files via non-canonical paths + readFile(dir.absolutePath() + "/../" + dir.dirName() + "/" + fileName); +} + +QByteArray tst_SandboxedFileAccess::readFile(const QString &fileName) +{ + QFile file(fileName); + QVERIFY(file.exists()); + QVERIFY(file.open(QFile::ReadOnly)); + QVERIFY(file.isReadable()); + QByteArray data = file.read(100); + QVERIFY(!data.isEmpty()); + return data; +} + +void tst_SandboxedFileAccess::writeSingleFile() +{ + QString filePath = getFileName(QFileDialog::AcceptSave, QFileDialog::AnyFile, + "Choose a file to write", "write-single-file.txt"); + writeFile(filePath); + readFile(filePath); +} + +void tst_SandboxedFileAccess::writeSingleFileNonCanonical() +{ + QString filePath = getFileName(QFileDialog::AcceptSave, QFileDialog::AnyFile, + "Choose a file to write", "write-single-file-non-canonical.txt"); + QDir dir; + QString fileName; + + { + QFileInfo info(filePath); + dir = info.path(); + fileName = info.fileName(); + QVERIFY(dir.exists()); + QVERIFY(!fileName.isEmpty()); + } + + writeFile(dir.absolutePath() + "/../" + dir.dirName() + "/" + fileName); + readFile(filePath); +} + +void tst_SandboxedFileAccess::writeFile(const QString &fileName) +{ + QFile file(fileName); + QVERIFY(file.open(QFile::WriteOnly)); + QVERIFY(file.isWritable()); + QVERIFY(file.write("Hello world")); +} + +void tst_SandboxedFileAccess::removeFile() +{ + QString fileName = getFileName(QFileDialog::AcceptSave, QFileDialog::AnyFile, + "Choose a file to write and then remove", "write-and-remove-file.txt"); + writeFile(fileName); + + { + QFile file(fileName); + QVERIFY(file.remove()); + } +} + +void tst_SandboxedFileAccess::trashFile() +{ + QString fileName = getFileName(QFileDialog::AcceptSave, QFileDialog::AnyFile, + "Choose a file to write and then trash", "write-and-trash-file.txt"); + writeFile(fileName); + + { + QFile file(fileName); + QVERIFY(file.moveToTrash()); + } +} + +void tst_SandboxedFileAccess::readFileAfterRestart() +{ + // Every other restart of the app will save a file or load a previously saved file + + QSettings settings; + QString savedFile = settings.value("savedFile").toString(); + if (savedFile.isEmpty()) { + QString filePath = getFileName(QFileDialog::AcceptSave, QFileDialog::AnyFile, + "Choose a file to write for reading after restart", "write-and-read-after-restart.txt"); + qDebug() << "Writing" << filePath << "and saving to preferences"; + writeFile(filePath); + settings.setValue("savedFile", filePath); + m_persistedFileNames << filePath; + } else { + qDebug() << "Loading" << savedFile << "from preferences"; + settings.remove("savedFile"); // Remove up front, in case this fails + readFile(savedFile); + QFile file(savedFile); + QVERIFY(file.remove()); + } +} + +void tst_SandboxedFileAccess::directoryAccess() +{ + // Every other restart of the app will re-establish access to the folder, + // or re-use previous access. + + QSettings settings; + QString directory = settings.value("savedDirectory").toString(); + if (directory.isEmpty()) { + directory = getFileName(QFileDialog::AcceptOpen, QFileDialog::Directory, + "Choose a directory we can create some files in"); + auto canonical = QFileInfo(directory).canonicalFilePath(); + QVERIFY(!canonical.isEmpty()); + directory = canonical; + settings.setValue("savedDirectory", directory); + m_persistedFileNames << QFileInfo(directory).canonicalFilePath(); + } else { + settings.remove("savedDirectory"); + } + settings.sync(); + + QString fileInDir; + + { + QDir dir(directory); + QVERIFY(dir.exists()); + QVERIFY(dir.isReadable()); + fileInDir = dir.filePath("file-in-dir.txt"); + } + + writeFile(fileInDir); + readFile(fileInDir); + + { + QDir dir(directory); + QVERIFY(dir.count() > 0); + QVERIFY(dir.entryList().contains("file-in-dir.txt")); + } + + { + QDir dir(directory); + QVERIFY(dir.mkdir("subdirectory")); + QVERIFY(dir.entryList().contains("subdirectory")); + fileInDir = dir.filePath("subdirectory/file-in-subdir.txt"); + } + + writeFile(fileInDir); + readFile(fileInDir); + + // Check that we can write to a non-canonical path within the directory + // we have access to, and then read it from the canonical path. + writeFile(directory + "/subdirectory/../non-existing-non-canonical.txt"); + readFile(directory + "/non-existing-non-canonical.txt"); + + { + QDir dir(directory); + QVERIFY(dir.cd("subdirectory")); + dir.removeRecursively(); + } +} + +void tst_SandboxedFileAccess::securityScopedTargetFile() +{ + // This is a non-security scoped file + auto documents = QStandardPaths::writableLocation(QStandardPaths::DocumentsLocation); + QString sourceFilePath = documents + "/test-security-scoped-target-file.txt"; + writeFile(sourceFilePath); + QFile sourceFile(sourceFilePath); + + QString directory = getFileName(QFileDialog::AcceptOpen, QFileDialog::Directory, + "Choose a directory we can link/copy some to"); + + QString subDirectory; + { + QDir dir(directory); + QVERIFY(dir.mkdir("subdirectory")); + QVERIFY(dir.entryList().contains("subdirectory")); + subDirectory = dir.filePath("subdirectory"); + } + + QVERIFY(sourceFile.copy(subDirectory + "/copied-file.txt")); + QVERIFY(sourceFile.link(subDirectory + "/linked-file.txt")); + QVERIFY(sourceFile.rename(subDirectory + "/renamed-file.txt")); + + { + QDir dir(directory); + QVERIFY(dir.cd("subdirectory")); + dir.removeRecursively(); + } +} + +void tst_SandboxedFileAccess::fileOpenEvent() +{ + struct OpenEventFilter : public QObject + { + bool eventFilter(QObject *watched, QEvent *event) override + { + if (event->type() == QEvent::FileOpen) { + QFileOpenEvent *openEvent = static_cast<QFileOpenEvent *>(event); + fileName = openEvent->file(); + } + + return QObject::eventFilter(watched, event); + } + + QString fileName; + }; + + OpenEventFilter openEventFilter; + qGuiApp->installEventFilter(&openEventFilter); + + m_widget->setLayout(new QVBoxLayout); + QLabel label; + label.setWordWrap(true); + m_widget->layout()->addWidget(&label); +#if defined(Q_OS_MACOS) + label.setText("Drag a text file to the app's Dock icon, or open in the app via Finder's 'Open With' menu"); +#else + label.setText("Open the Files app, and choose 'Open With' or share a text document with this app"); +#endif + label.show(); + + QTRY_VERIFY_WITH_TIMEOUT(!openEventFilter.fileName.isNull(), 30s); + label.setText("Got file: " + openEventFilter.fileName); + + readFile(openEventFilter.fileName); + + QTest::qWait(3000); +} + +QString tst_SandboxedFileAccess::getFileName(QFileDialog::AcceptMode acceptMode, QFileDialog::FileMode fileMode, + const QString &action, const QString &fileName) +{ + QFileDialog dialog(m_widget); + dialog.setAcceptMode(acceptMode); + dialog.setFileMode(fileMode); + dialog.setWindowTitle(action); + dialog.setLabelText(QFileDialog::Accept, action); + dialog.selectFile(fileName); + if (!action.isEmpty()) + qDebug() << "âšī¸" << action; + dialog.exec(); + auto selectedFiles = dialog.selectedFiles(); + return selectedFiles.count() ? selectedFiles.first() : QString(); +} + +int main(int argc, char** argv) +{ + QApplication app(argc, argv); + + tst_SandboxedFileAccess testObject; + + // Run tests with QApp running + int testExecResult = 0; + QMetaObject::invokeMethod(&testObject, [&]{ + testExecResult = QTest::qExec(&testObject, argc, argv); + }, Qt::QueuedConnection); + + [[maybe_unused]] int appExecResult = app.exec(); + return testExecResult; +} + +#include "tst_sandboxed_file_access.moc" |