diff options
Diffstat (limited to 'cmake/QtTargetHelpers.cmake')
| -rw-r--r-- | cmake/QtTargetHelpers.cmake | 226 |
1 files changed, 172 insertions, 54 deletions
diff --git a/cmake/QtTargetHelpers.cmake b/cmake/QtTargetHelpers.cmake index eedfdbeba74..397628ba11a 100644 --- a/cmake/QtTargetHelpers.cmake +++ b/cmake/QtTargetHelpers.cmake @@ -1688,15 +1688,35 @@ function(qt_internal_get_target_sources_property out_var) set(${out_var} "${${out_var}}" PARENT_SCOPE) endfunction() -# This function collects target properties that contain generator expressions and needs to be -# exported. This function is needed since the CMake EXPORT_PROPERTIES property doesn't support -# properties that contain generator expressions. -# Usage: qt_internal_add_genex_properties_export(target properties...) -function(qt_internal_add_genex_properties_export target) +# This function collects target properties that need to be exported without using CMake's +# EXPORT_PROPERTIES. +# Use cases: +# - Properties named INTERFACE_foo (which CMake doesn't allow exporting) +# - Properties that contain generator expressions (need special handling for multi-config builds) +# Usage: +# qt_internal_add_custom_properties_to_export(target +# PROPERTIES property1 [property2 ...] +# PROPERTIES_WITHOUT_GENEXES property3 [property4 ...] +# ) +# Arguments: +# PROPERTIES +# should contain names of properties that can differ in multi-config builds (e.g. paths) +# PROPERTIES_WITHOUT_GENEXES +# should contain names of properties that will always have the same value in multi config +# builds (e.g, feature values). +function(qt_internal_add_custom_properties_to_export target) + set(opt_args "") + set(single_args "") + set(multi_args + PROPERTIES + PROPERTIES_WITHOUT_GENEXES + ) + cmake_parse_arguments(PARSE_ARGV 1 arg "${opt_args}" "${single_args}" "${multi_args}") + _qt_internal_validate_all_args_are_parsed(arg) + get_cmake_property(is_multi_config GENERATOR_IS_MULTI_CONFIG) - set(config_check_begin "") - set(config_check_end "") + # Prepare multi-config helper genexes. if(is_multi_config) list(GET CMAKE_CONFIGURATION_TYPES 0 first_config_type) @@ -1704,7 +1724,7 @@ function(qt_internal_add_genex_properties_export target) # The check is only applicable to the 'main' configuration. If user project doesn't use # multi-config generator, then the check supposed to return true and the value from the # 'main' configuration supposed to be used. - string(JOIN "" check_if_config_empty + string(CONCAT check_if_config_empty "$<1:$><NOT:" "$<1:$><BOOL:" "$<1:$><CONFIG$<ANGLE-R>" @@ -1714,7 +1734,7 @@ function(qt_internal_add_genex_properties_export target) # The genex snippet is evaluated to '$<CONFIG:'Qt config type'>' in the generated cmake # file and checks if the config that user uses matches the generated cmake file config. - string(JOIN "" check_user_config + string(CONCAT check_user_config "$<1:$><CONFIG:$<CONFIG>$<ANGLE-R>" ) @@ -1725,34 +1745,70 @@ function(qt_internal_add_genex_properties_export target) # user project according to the user config type. # All genexes need to be escaped properly to protect them from evaluation by the # file(GENERATE call in the qt_internal_export_genex_properties function. - string(JOIN "" config_check_begin + string(CONCAT config_check_begin_multi "$<1:$><" "$<1:$><OR:" "${check_user_config}" "$<$<CONFIG:${first_config_type}>:$<COMMA>${check_if_config_empty}>" "$<ANGLE-R>:" ) - set(config_check_end "$<ANGLE-R>") + set(config_check_end_multi "$<ANGLE-R>") endif() set(target_name "${QT_CMAKE_EXPORT_NAMESPACE}::${target}") - foreach(property IN LISTS ARGN) - set(target_property_genex "$<TARGET_PROPERTY:${target_name},${property}>") - # All properties that contain lists need to be protected of processing by JOIN genex calls. - # So this escapes the semicolons for these list. - set(target_property_list_escape - "$<JOIN:$<GENEX_EVAL:${target_property_genex}>,\;>") - set(property_value - "\"${config_check_begin}${target_property_list_escape}${config_check_end}\"") - set_property(TARGET ${target} APPEND PROPERTY _qt_export_genex_properties_content - "${property} ${property_value}") + + set(property_sources + PROPERTIES + PROPERTIES_WITHOUT_GENEXES + ) + + foreach(property_source IN LISTS property_sources) + if(property_source STREQUAL "PROPERTIES") + # Properties with genexes need multi-config specific handling. + set(config_check_begin "${config_check_begin_multi}") + set(config_check_end "${config_check_end_multi}") + + set(output_property "_qt_export_custom_properties_content") + elseif(property_source STREQUAL "PROPERTIES_WITHOUT_GENEXES") + # Properties without genexes don't need the config checks. + set(config_check_begin "") + set(config_check_end "") + + set(output_property "_qt_export_custom_properties_no_genexes_content") + else() + message(FATAL_ERROR "Invalid type of property source" ${property_source}"") + endif() + + foreach(property IN LISTS arg_${property_source}) + set(target_property_genex "$<TARGET_PROPERTY:${target_name},${property}>") + # All properties that contain lists need to be protected of processing by JOIN genex + # calls. So this escapes the semicolons for these list. + set(target_property_list_escape + "$<JOIN:$<GENEX_EVAL:${target_property_genex}>,\;>") + set(property_value + "\"${config_check_begin}${target_property_list_escape}${config_check_end}\"") + set_property(TARGET ${target} APPEND PROPERTY "${output_property}" + "${property} ${property_value}") + endforeach() endforeach() endfunction() -# This function executes generator expressions for the properties that are added by the -# qt_internal_add_genex_properties_export function and sets the calculated values to the -# corresponding properties in the generated ExtraProperties.cmake file. The file then needs to be -# included after the target creation routines in Config.cmake files. It also supports Multi-Config -# builds. +# This function generates and installs ${EXPORT_NAME_PREFIX}ExportProperties-$<CONFIG>.cmake files +# to be included from inside a FooConfig.cmake file. +# +# The file contains set_property(TARGET PROPERTY) assignments that append values to a given target's +# properties as added by the qt_internal_add_custom_properties_to_export function. +# +# The assigned values are computed from the result of executing the generator expressions that were +# stored in the properties, and are wrapped in config-specific genexes in a multi-config build. +# +# Example output: +# set_property(TARGET Qt6::Foo PROPERTY MY_GENEX_PROP +# "$<$<OR:$<CONFIG:RelWithDebInfo>,$<NOT:$<BOOL:$<CONFIG>>>>:OneReleaseVal>") +# set_property(TARGET Qt6::Foo PROPERTY MY_REGULAR_PROP "SecondValue") +# include("${CMAKE_CURRENT_LIST_DIR}/Qt6FooExtraProperties-Debug.cmake") +# inside the include +# set_property(TARGET Qt6::Foo APPEND PROPERTY MY_GENEX_PROP "$<$<OR:$<CONFIG:Debug>>:OneDebugVal>") +# # Arguments: # EXPORT_NAME_PREFIX: # The portion of the file name before ExtraProperties.cmake @@ -1761,13 +1817,15 @@ endfunction() # TARGETS: # The internal target names. function(qt_internal_export_genex_properties) - set(option_args "") + set(opt_args "") set(single_args EXPORT_NAME_PREFIX CONFIG_INSTALL_DIR ) - set(multi_args TARGETS) - cmake_parse_arguments(arg "${option_args}" "${single_args}" "${multi_args}" ${ARGN}) + set(multi_args + TARGETS + ) + cmake_parse_arguments(PARSE_ARGV 0 arg "${opt_args}" "${single_args}" "${multi_args}") if(NOT arg_EXPORT_NAME_PREFIX) message(FATAL_ERROR "qt_internal_export_genex_properties: " @@ -1779,24 +1837,36 @@ function(qt_internal_export_genex_properties) "TARGETS argument must contain at least one target") endif() - foreach(target IN LISTS arg_TARGETS) - get_cmake_property(is_multi_config GENERATOR_IS_MULTI_CONFIG) + # TODO: Handling more than one target won't work correctly atm due to trying to create and + # install the same file name multiple times for each target. + list(LENGTH arg_TARGETS targets_count) + if(targets_count GREATER 1) + message(AUTHOR_WARNING "qt_internal_export_genex_properties: " + "Specifying more than one target is not fully supported yet.") + endif() + get_cmake_property(is_multi_config GENERATOR_IS_MULTI_CONFIG) + + set(should_append "") + set(config_suffix "") + set(is_first_config "1") + if(is_multi_config) + list(GET CMAKE_CONFIGURATION_TYPES 0 first_config_type) + + # The non-genex properties should only go to the first config file. + set(is_first_config "$<CONFIG:${first_config_type}>") + + set(config_suffix "$<$<NOT:${is_first_config}>:-$<CONFIG>>") + # If the generated file belongs to the 'main' config type, we should set property + # but not append it. + string(JOIN "" should_append + "$<$<NOT:${is_first_config}>: APPEND>") + endif() + + foreach(target IN LISTS arg_TARGETS) set(output_file_base_name "${arg_EXPORT_NAME_PREFIX}ExtraProperties") - set(should_append "") - set(config_suffix "") - if(is_multi_config) - list(GET CMAKE_CONFIGURATION_TYPES 0 first_config_type) - set(config_suffix "$<$<NOT:$<CONFIG:${first_config_type}>>:-$<CONFIG>>") - # If the generated file belongs to the 'main' config type, we should set property - # but not append it. - string(JOIN "" should_append - "$<$<NOT:$<CONFIG:${first_config_type}>>: APPEND>") - endif() set(file_name "${output_file_base_name}${config_suffix}.cmake") - - qt_path_join(output_file "${arg_CONFIG_INSTALL_DIR}" - "${file_name}") + qt_path_join(output_file "${arg_CONFIG_INSTALL_DIR}" "${file_name}") if(NOT IS_ABSOLUTE "${output_file}") qt_path_join(output_file "${QT_BUILD_DIR}" "${output_file}") @@ -1804,17 +1874,51 @@ function(qt_internal_export_genex_properties) set(target_name "${QT_CMAKE_EXPORT_NAMESPACE}::${target}") + # Common genex helpers. string(JOIN "" set_property_begin "set_property(TARGET " "${target_name}${should_append} PROPERTY " ) set(set_property_end ")") set(set_property_glue "${set_property_end}\n${set_property_begin}") + set(t_prop "TARGET_PROPERTY:${target}") + + # Handle the properties that contain genexes. set(property_list - "$<GENEX_EVAL:$<TARGET_PROPERTY:${target},_qt_export_genex_properties_content>>") - string(JOIN "" set_property_content "${set_property_begin}" + "$<GENEX_EVAL:$<${t_prop},_qt_export_custom_properties_content>>") + set(property_has_values "$<BOOL:${property_list}>") + string(CONCAT set_property_content + "${set_property_begin}" "$<JOIN:${property_list},${set_property_glue}>" "${set_property_end}") + string(CONCAT set_property_content_conditional + "$<${property_has_values}:" + "\n${set_property_content}" + ">") + + # We need to ensure the no genexes content only gets added to the first config file. + set(property_no_genexes_list + "$<GENEX_EVAL:$<${t_prop},_qt_export_custom_properties_no_genexes_content>>") + set(property_no_genexes_has_values "$<BOOL:${property_no_genexes_list}>") + string(CONCAT property_no_genexes_has_values_and_first_config + "$<AND:${property_no_genexes_has_values},${is_first_config}>") + + string(CONCAT set_property_no_genexes_content + "${set_property_begin}" + "$<JOIN:${property_no_genexes_list},${set_property_glue}>" + "${set_property_end}") + + string(CONCAT set_property_no_genexes_content_conditional + "$<${property_no_genexes_has_values_and_first_config}:" + "\n${set_property_no_genexes_content}" + ">") + + # Final content is generated if at least one genex-carrying property has a value, + # or if we are in the first config and at least one no-genex property has a value. + set(content_available_condition + "$<OR:${property_has_values},${property_no_genexes_has_values_and_first_config}>") + + set(config_includes_string "") if(is_multi_config) set(config_includes "") foreach(config IN LISTS CMAKE_CONFIGURATION_TYPES) @@ -1827,19 +1931,33 @@ function(qt_internal_export_genex_properties) endforeach() list(JOIN config_includes "\n" config_includes_string) set(config_includes_string - "\n$<$<CONFIG:${first_config_type}>:${config_includes_string}>") + "\n$<${is_first_config}:${config_includes_string}>") + + # Config includes should be included if we have properties with genexes, which are + # config specific. + string(CONCAT config_includes_string_conditional + "$<${property_has_values}:" + "${config_includes_string}" + ">") endif() + string(CONCAT final_content + "$<${content_available_condition}:" + "${set_property_content_conditional}" + "${set_property_no_genexes_content_conditional}" + "${config_includes_string_conditional}" + ">") + file(GENERATE OUTPUT "${output_file}" - CONTENT "$<$<BOOL:${property_list}>:${set_property_content}${config_includes_string}>" - CONDITION "$<BOOL:${property_list}>" + CONTENT "${final_content}" + CONDITION "${content_available_condition}" ) - endforeach() - qt_install(FILES "$<$<BOOL:${property_list}>:${output_file}>" - DESTINATION "${arg_CONFIG_INSTALL_DIR}" - COMPONENT Devel - ) + qt_install(FILES "$<${content_available_condition}:${output_file}>" + DESTINATION "${arg_CONFIG_INSTALL_DIR}" + COMPONENT Devel + ) + endforeach() endfunction() # A small wrapper for adding the Platform target, and a building block for the PlatformXInternal |