Send HTTP get request from GSM SIM800c and Arduino

Question

I am trying to send Get request from my GSM Module but after connecting to server it is not responding any thing

#include <SoftwareSerial.h>
SoftwareSerial myGsm(2,3);
void setup()
{
myGsm.begin(9600);
Serial.begin(9600);
delay(500);
myGsm.println("AT+CGATT=1");
delay(200);
printSerialData();
myGsm.println("AT+SAPBR=3,1,\"CONTYPE\",\"GPRS\"");//setting the SAPBR,connection type is GPRS
delay(1000);
printSerialData();
myGsm.println("AT+SAPBR=3,1,\"APN\",\"wap.mobilinkworld.com\"");//setting the APN,2nd parameter empty works for all networks
delay(5000);
printSerialData();
myGsm.println();
myGsm.println("AT+SAPBR=1,1");
delay(10000);
printSerialData();
myGsm.println();
myGsm.println("AT+SAPBR=2,1");
delay(10000);
printSerialData();
myGsm.println("AT+HTTPINIT"); 
delay(2000);
printSerialData();
myGsm.println("AT+HTTPPARA=\"URL\",\"http://sensor.somee.com/api/Data/GetData?SensorID=1\"");// setting the httppara,
delay(1000);
printSerialData();
myGsm.println();
delay(10000);//the delay is important if the return datas are very large, the time required longer.
printSerialData();
delay(9000);
printSerialData();
delay(1000);
Serial.println("done ");
printSerialData();
}
void loop()
{
}
void printSerialData()
{
while(myGsm.available()!=0)
Serial.write(myGsm.read());
}

and the Out put is

AT+CGATT=1

OK
AT+SAPBR=3,1,"CONTYPE","GPRS"

OK
AT+SAPBR=3,1,"APN","wap.mobilinkworld.com"

OK

AT+SAPBR=1,1

OK

AT+SAPBR=2,1

+SAPBR: 1,1,"10.209.122.68"

OK
AT+HTTPINIT

OK
AT+HTTPPARA="URL","http://sensor.somee.com/api/Data/GetData?Sen
done

Could you solve this problem?

Davoud
– Davoud

2021-02-22 09:19:03 +00:00
Commented Feb 22, 2021 at 9:19 — Davoud
– Davoud, Commented Feb 22, 2021 at 9:19

Taras Bilynskyi · Accepted Answer · 2021-04-15 13:15:08Z

You haven't instructed the module to make a request yet. With the AT+HTTPPARA command, you are just configuring the request you want to make. In your case, you just specified the URL you want to call. Next, you have to send

AT+HTTPACTION=1

to make the actual request using the HTTP GET method, and then you can read the HTTP response using

AT+HTTPREAD

Keep in mind that after AT+HTTPACTION you will receive an unsolicited result code in the format

+HTTPACTION: <Method>,<StatusCode>,<DataLen>

this will happen after the module will actually do the request and will have the response.

Codebreaker007 · Accepted Answer · 2020-04-11 18:09:38Z

-1

You should place the code to communicate (which is a recurring task) into the loop (and do this without blocking delay()s. Using delay stops the CPU so whatever comes to the buffer is probably not processed.
Read about the difference of placing code in the setup and the loop in the Arduino basic documentation.
Never use delay in communiction scenarios (except for intializing hardware in setup) see example blinkwithoutdelay in ArduinoIDE

answered Apr 11, 2020 at 18:09

Codebreaker007

1,3311 gold badge7 silver badges14 bronze badges

Calling webservice in a loop :| ?! What do you mean?

Davoud
– Davoud

2021-02-22 09:18:09 +00:00
Commented Feb 22, 2021 at 9:18

Add a comment |

Stack Exchange Network

Send HTTP get request from GSM SIM800c and Arduino

2 Answers 2

Your Answer

Hot Network Questions

Send HTTP get request from GSM SIM800c and Arduino

2 Answers 2

Your Answer

Sign up or log in

Post as a guest

Related

Hot Network Questions