Arduino MEGA 2560 - PWM in case statements not working

So I am using Arduino to control RGB Strip light, the analogueWrite(Pin,Value); Works with the prebuilt AnalogueWriteMega example - on pins 8, 9, and 10.

When I move this into my program, Pin 8 still works but pins 9 and 10 don't work.

Anywhere I write analogueWrite() it only works if the value is 255

• Green is pin 8
• Red is pin 9
• Blue is pin 10

#include <boarddefs.h>
#include <IRremote.h>
#include <IRremoteInt.h>
#include <ir_Lego_PF_BitStreamEncoder.h>

#include <LiquidCrystal.h>
// encoder
int val;
int encoder0PinS = 29;
int encoder0PinA = 31;
int encoder0PinB = 33;
int encoder0Pos = 0;
int encoder0PinALast = LOW;
int n = LOW;
int MenuPos;
int SubPos;
bool Selected = false;
int Reader = LOW;

// lcd
const int rs = 12, en = 11, d4 = 5, d5 = 4, d6 = 3, d7 = 2;
LiquidCrystal lcd(rs, en, d4, d5, d6, d7);

//pot
int ASensePin = A0;
double ASenseValue = 0;
double AFixedValue = 0;
int AFixOut = 0;

//randoms
int ranPin;
int ranVal;

//IR

int receiver = 45; // Signal Pin of IR receiver to Arduino Digital Pin 45

/*-----( Declare objects )-----*/
IRrecv irrecv(receiver);     // create instance of 'irrecv'
decode_results results;      // create instance of 'decode_results'



void translateIR() { // takes action based on IR code received

  // describing Remote IR codes
  switch (results.value)
  {

    case 16195807:
      Serial.println("Red, 0, 255, 0");
      analogWrite(8, 0);
      analogWrite(9, 255);    < ------ works
      analogWrite(10, 0);
      break;

    case 16197847:
      Serial.println("Yellow, 255, 255, 0");
      analogWrite(8, 100);      < ----don't work
      delay(50);
      analogWrite(9, 100);       <----don't work
      delay(50);
      analogWrite(10, 0);
      break;

    case 16228447:
      Serial.println("green, 255 , 0, 0");
      analogWrite(8, 255);
      analogWrite(9, 0);
      analogWrite(10, 0);
      break;

    case 16230487:
      Serial.println("turquois, 0, 255, 255");
      analogWrite(8, 0);
      delay(50);
      analogWrite(9, 100);
      delay(50);
      analogWrite(10, 100);
      delay(50);
      break;

    case 16212127:
      Serial.println("blue, 0, 0, 255");
      analogWrite(8, 0);
      analogWrite(9, 0);
      analogWrite(10, 255);
      break;

    case 16214167:
      Serial.println("Purple, 255, 0, 255");
      analogWrite(8, 100);
      delay(50);
      analogWrite(9, 0);
      delay(50);
      analogWrite(10, 100);
      delay(50);
      break;

    case 16244767:
      Serial.println("White, 255, 255, 255");
      analogWrite(8, 255);
      analogWrite(9, 255);
      analogWrite(10, 255);
      break;

    default:
      Serial.println(results.value);
  }// End Case

  delay(500); // Do not get immediate repeat
} //END translateIR



void setup() {
  pinMode (encoder0PinA, INPUT);
  pinMode (encoder0PinB, INPUT);
  pinMode (encoder0PinS, INPUT);
  pinMode (8, OUTPUT);
  pinMode (9, OUTPUT);
  pinMode (10, OUTPUT);

  lcd.begin(16, 2);
  lcd.print("      Start     ");

  Serial.begin (9600);
}

void loop() {
  n = digitalRead(encoder0PinA);
  if ((encoder0PinALast == LOW) && (n == HIGH)) {
    if (digitalRead(encoder0PinB) == LOW) {
      encoder0Pos--;
    } else {
      encoder0Pos++;
    }
  }
  encoder0PinALast = n;
  if (encoder0Pos == 4) {
    encoder0Pos = 0;
  }
  if (encoder0Pos == -1) {
    encoder0Pos = 3;
  }

  MenuPos = encoder0Pos;

  Reader = digitalRead(encoder0PinS);
  // Serial.println(Reader);

  if (digitalRead(encoder0PinS) == LOW) {
    while (digitalRead(encoder0PinS) == LOW) {}
    Selected = true;
  }

  Serial.println("MenuLoop");
  switch (MenuPos) {
    case 0:
      lcd.setCursor(0, 0);
      lcd.print("     Random    ");
      while (Selected == true) {
        ranPin = random(8, 10);
        ranVal = random(0, 255);
        analogWrite(ranPin, ranVal);

        if (digitalRead(encoder0PinS) == LOW) {
          while (digitalRead(encoder0PinS) == LOW) {}
          Selected = false;
        }
      }
      break;

    case 1:
      lcd.setCursor(0, 0);
      lcd.print("       IR      ");
      Serial.println("IR Receiver Button Decode");
      irrecv.enableIRIn(); // Start the receiver

      while (Selected == true) {
        if (irrecv.decode(&results)) // have we received an IR signal?
        {
          translateIR();
          irrecv.resume(); // receive the next value
          lcd.setCursor(0, 1);
          lcd.print("               ");
          lcd.setCursor(0, 1);
          lcd.print(results.value);
        }
        if (digitalRead(encoder0PinS) == LOW) {
          while (digitalRead(encoder0PinS) == LOW) {}
          Selected = false;
        }
      }

      break;

    case 2:
      lcd.setCursor(0, 0);
      lcd.print("      Temp     ");
      break;

    case 3:
      lcd.setCursor(0, 0);
      lcd.print("      Pot      ");

      while (Selected == true) {

Not working

        for (int thisPin = 8; thisPin <= 10; thisPin++) {
          // fade the LED on thisPin from off to brightest:
          for (int brightness = 0; brightness < 255; brightness++) {
            analogWrite(thisPin, brightness);
            delay(2);
          }
          // fade the LED on thisPin from brightest to off:
          for (int brightness = 255; brightness >= 0; brightness--) {
            analogWrite(thisPin, brightness);
            delay(2);
          }
          // pause between LEDs:
          delay(100);
        }

        if (digitalRead(encoder0PinS) == LOW) {
          while (digitalRead(encoder0PinS) == LOW) {}
          Selected = false;
        }
      }
      break;
  }
}