elog.c

Go to the documentation of this file.

/*-------------------------------------------------------------------------
 *
 * elog.c
 *    error logging and reporting
 *
 * Because of the extremely high rate at which log messages can be generated,
 * we need to be mindful of the performance cost of obtaining any information
 * that may be logged.  Also, it's important to keep in mind that this code may
 * get called from within an aborted transaction, in which case operations
 * such as syscache lookups are unsafe.
 *
 * Some notes about recursion and errors during error processing:
 *
 * We need to be robust about recursive-error scenarios --- for example,
 * if we run out of memory, it's important to be able to report that fact.
 * There are a number of considerations that go into this.
 *
 * First, distinguish between re-entrant use and actual recursion.  It
 * is possible for an error or warning message to be emitted while the
 * parameters for an error message are being computed.  In this case
 * errstart has been called for the outer message, and some field values
 * may have already been saved, but we are not actually recursing.  We handle
 * this by providing a (small) stack of ErrorData records.  The inner message
 * can be computed and sent without disturbing the state of the outer message.
 * (If the inner message is actually an error, this isn't very interesting
 * because control won't come back to the outer message generator ... but
 * if the inner message is only debug or log data, this is critical.)
 *
 * Second, actual recursion will occur if an error is reported by one of
 * the elog.c routines or something they call.  By far the most probable
 * scenario of this sort is "out of memory"; and it's also the nastiest
 * to handle because we'd likely also run out of memory while trying to
 * report this error!  Our escape hatch for this case is to reset the
 * ErrorContext to empty before trying to process the inner error.  Since
 * ErrorContext is guaranteed to have at least 8K of space in it (see mcxt.c),
 * we should be able to process an "out of memory" message successfully.
 * Since we lose the prior error state due to the reset, we won't be able
 * to return to processing the original error, but we wouldn't have anyway.
 * (NOTE: the escape hatch is not used for recursive situations where the
 * inner message is of less than ERROR severity; in that case we just
 * try to process it and return normally.  Usually this will work, but if
 * it ends up in infinite recursion, we will PANIC due to error stack
 * overflow.)
 *
 *
 * Portions Copyright (c) 1996-2025, PostgreSQL Global Development Group
 * Portions Copyright (c) 1994, Regents of the University of California
 *
 *
 * IDENTIFICATION
 *    src/backend/utils/error/elog.c
 *
 *-------------------------------------------------------------------------
 */
#include "postgres.h"
 
#include <fcntl.h>
#include <time.h>
#include <unistd.h>
#include <signal.h>
#include <ctype.h>
#ifdef HAVE_SYSLOG
#include <syslog.h>
#endif
#ifdef HAVE_EXECINFO_H
#include <execinfo.h>
#endif
 
#include "access/xact.h"
#include "common/ip.h"
#include "libpq/libpq.h"
#include "libpq/pqformat.h"
#include "mb/pg_wchar.h"
#include "miscadmin.h"
#include "nodes/miscnodes.h"
#include "pgstat.h"
#include "postmaster/bgworker.h"
#include "postmaster/postmaster.h"
#include "postmaster/syslogger.h"
#include "storage/ipc.h"
#include "storage/proc.h"
#include "tcop/tcopprot.h"
#include "utils/guc_hooks.h"
#include "utils/memutils.h"
#include "utils/ps_status.h"
#include "utils/varlena.h"
 
 
/* In this module, access gettext() via err_gettext() */
#undef _
#define _(x) err_gettext(x)
 
 
/* Global variables */
ErrorContextCallback *error_context_stack = NULL;
 
sigjmp_buf *PG_exception_stack = NULL;
 
/*
 * Hook for intercepting messages before they are sent to the server log.
 * Note that the hook will not get called for messages that are suppressed
 * by log_min_messages.  Also note that logging hooks implemented in preload
 * libraries will miss any log messages that are generated before the
 * library is loaded.
 */
emit_log_hook_type emit_log_hook = NULL;
 
/* GUC parameters */
int         Log_error_verbosity = PGERROR_DEFAULT;
char       *Log_line_prefix = NULL; /* format for extra log line info */
int         Log_destination = LOG_DESTINATION_STDERR;
char       *Log_destination_string = NULL;
bool        syslog_sequence_numbers = true;
bool        syslog_split_messages = true;
 
/* Processed form of backtrace_functions GUC */
static char *backtrace_function_list;
 
#ifdef HAVE_SYSLOG
 
/*
 * Max string length to send to syslog().  Note that this doesn't count the
 * sequence-number prefix we add, and of course it doesn't count the prefix
 * added by syslog itself.  Solaris and sysklogd truncate the final message
 * at 1024 bytes, so this value leaves 124 bytes for those prefixes.  (Most
 * other syslog implementations seem to have limits of 2KB or so.)
 */
#ifndef PG_SYSLOG_LIMIT
#define PG_SYSLOG_LIMIT 900
#endif
 
static bool openlog_done = false;
static char *syslog_ident = NULL;
static int  syslog_facility = LOG_LOCAL0;
 
static void write_syslog(int level, const char *line);
#endif
 
#ifdef WIN32
static void write_eventlog(int level, const char *line, int len);
#endif
 
/* We provide a small stack of ErrorData records for re-entrant cases */
#define ERRORDATA_STACK_SIZE  5
 
static ErrorData errordata[ERRORDATA_STACK_SIZE];
 
static int  errordata_stack_depth = -1; /* index of topmost active frame */
 
static int  recursion_depth = 0;    /* to detect actual recursion */
 
/*
 * Saved timeval and buffers for formatted timestamps that might be used by
 * log_line_prefix, csv logs and JSON logs.
 */
static struct timeval saved_timeval;
static bool saved_timeval_set = false;
 
#define FORMATTED_TS_LEN 128
static char formatted_start_time[FORMATTED_TS_LEN];
static char formatted_log_time[FORMATTED_TS_LEN];
 
 
/* Macro for checking errordata_stack_depth is reasonable */
#define CHECK_STACK_DEPTH() \
    do { \
        if (errordata_stack_depth < 0) \
        { \
            errordata_stack_depth = -1; \
            ereport(ERROR, (errmsg_internal("errstart was not called"))); \
        } \
    } while (0)
 
 
static const char *err_gettext(const char *str) pg_attribute_format_arg(1);
static ErrorData *get_error_stack_entry(void);
static void set_stack_entry_domain(ErrorData *edata, const char *domain);
static void set_stack_entry_location(ErrorData *edata,
                                     const char *filename, int lineno,
                                     const char *funcname);
static bool matches_backtrace_functions(const char *funcname);
static pg_noinline void set_backtrace(ErrorData *edata, int num_skip);
static void set_errdata_field(MemoryContextData *cxt, char **ptr, const char *str);
static void FreeErrorDataContents(ErrorData *edata);
static void write_console(const char *line, int len);
static const char *process_log_prefix_padding(const char *p, int *ppadding);
static void log_line_prefix(StringInfo buf, ErrorData *edata);
static void send_message_to_server_log(ErrorData *edata);
static void send_message_to_frontend(ErrorData *edata);
static void append_with_tabs(StringInfo buf, const char *str);
 
 
/*
 * is_log_level_output -- is elevel logically >= log_min_level?
 *
 * We use this for tests that should consider LOG to sort out-of-order,
 * between ERROR and FATAL.  Generally this is the right thing for testing
 * whether a message should go to the postmaster log, whereas a simple >=
 * test is correct for testing whether the message should go to the client.
 */
static inline bool
is_log_level_output(int elevel, int log_min_level)
{
    if (elevel == LOG || elevel == LOG_SERVER_ONLY)
    {
        if (log_min_level == LOG || log_min_level <= ERROR)
            return true;
    }
    else if (elevel == WARNING_CLIENT_ONLY)
    {
        /* never sent to log, regardless of log_min_level */
        return false;
    }
    else if (log_min_level == LOG)
    {
        /* elevel != LOG */
        if (elevel >= FATAL)
            return true;
    }
    /* Neither is LOG */
    else if (elevel >= log_min_level)
        return true;
 
    return false;
}
 
/*
 * Policy-setting subroutines.  These are fairly simple, but it seems wise
 * to have the code in just one place.
 */
 
/*
 * should_output_to_server --- should message of given elevel go to the log?
 */
static inline bool
should_output_to_server(int elevel)
{
    return is_log_level_output(elevel, log_min_messages);
}
 
/*
 * should_output_to_client --- should message of given elevel go to the client?
 */
static inline bool
should_output_to_client(int elevel)
{
    if (whereToSendOutput == DestRemote && elevel != LOG_SERVER_ONLY)
    {
        /*
         * client_min_messages is honored only after we complete the
         * authentication handshake.  This is required both for security
         * reasons and because many clients can't handle NOTICE messages
         * during authentication.
         */
        if (ClientAuthInProgress)
            return (elevel >= ERROR);
        else
            return (elevel >= client_min_messages || elevel == INFO);
    }
    return false;
}
 
 
/*
 * message_level_is_interesting --- would ereport/elog do anything?
 *
 * Returns true if ereport/elog with this elevel will not be a no-op.
 * This is useful to short-circuit any expensive preparatory work that
 * might be needed for a logging message.  There is no point in
 * prepending this to a bare ereport/elog call, however.
 */
bool
message_level_is_interesting(int elevel)
{
    /*
     * Keep this in sync with the decision-making in errstart().
     */
    if (elevel >= ERROR ||
        should_output_to_server(elevel) ||
        should_output_to_client(elevel))
        return true;
    return false;
}
 
 
/*
 * in_error_recursion_trouble --- are we at risk of infinite error recursion?
 *
 * This function exists to provide common control of various fallback steps
 * that we take if we think we are facing infinite error recursion.  See the
 * callers for details.
 */
bool
in_error_recursion_trouble(void)
{
    /* Pull the plug if recurse more than once */
    return (recursion_depth > 2);
}
 
/*
 * One of those fallback steps is to stop trying to localize the error
 * message, since there's a significant probability that that's exactly
 * what's causing the recursion.
 */
static inline const char *
err_gettext(const char *str)
{
#ifdef ENABLE_NLS
    if (in_error_recursion_trouble())
        return str;
    else
        return gettext(str);
#else
    return str;
#endif
}
 
/*
 * errstart_cold
 *      A simple wrapper around errstart, but hinted to be "cold".  Supporting
 *      compilers are more likely to move code for branches containing this
 *      function into an area away from the calling function's code.  This can
 *      result in more commonly executed code being more compact and fitting
 *      on fewer cache lines.
 */
pg_attribute_cold bool
errstart_cold(int elevel, const char *domain)
{
    return errstart(elevel, domain);
}
 
/*
 * errstart --- begin an error-reporting cycle
 *
 * Create and initialize error stack entry.  Subsequently, errmsg() and
 * perhaps other routines will be called to further populate the stack entry.
 * Finally, errfinish() will be called to actually process the error report.
 *
 * Returns true in normal case.  Returns false to short-circuit the error
 * report (if it's a warning or lower and not to be reported anywhere).
 */
bool
errstart(int elevel, const char *domain)
{
    ErrorData  *edata;
    bool        output_to_server;
    bool        output_to_client = false;
    int         i;
 
    /*
     * Check some cases in which we want to promote an error into a more
     * severe error.  None of this logic applies for non-error messages.
     */
    if (elevel >= ERROR)
    {
        /*
         * If we are inside a critical section, all errors become PANIC
         * errors.  See miscadmin.h.
         */
        if (CritSectionCount > 0)
            elevel = PANIC;
 
        /*
         * Check reasons for treating ERROR as FATAL:
         *
         * 1. we have no handler to pass the error to (implies we are in the
         * postmaster or in backend startup).
         *
         * 2. ExitOnAnyError mode switch is set (initdb uses this).
         *
         * 3. the error occurred after proc_exit has begun to run.  (It's
         * proc_exit's responsibility to see that this doesn't turn into
         * infinite recursion!)
         */
        if (elevel == ERROR)
        {
            if (PG_exception_stack == NULL ||
                ExitOnAnyError ||
                proc_exit_inprogress)
                elevel = FATAL;
        }
 
        /*
         * If the error level is ERROR or more, errfinish is not going to
         * return to caller; therefore, if there is any stacked error already
         * in progress it will be lost.  This is more or less okay, except we
         * do not want to have a FATAL or PANIC error downgraded because the
         * reporting process was interrupted by a lower-grade error.  So check
         * the stack and make sure we panic if panic is warranted.
         */
        for (i = 0; i <= errordata_stack_depth; i++)
            elevel = Max(elevel, errordata[i].elevel);
    }
 
    /*
     * Now decide whether we need to process this report at all; if it's
     * warning or less and not enabled for logging, just return false without
     * starting up any error logging machinery.
     */
    output_to_server = should_output_to_server(elevel);
    output_to_client = should_output_to_client(elevel);
    if (elevel < ERROR && !output_to_server && !output_to_client)
        return false;
 
    /*
     * We need to do some actual work.  Make sure that memory context
     * initialization has finished, else we can't do anything useful.
     */
    if (ErrorContext == NULL)
    {
        /* Oops, hard crash time; very little we can do safely here */
        write_stderr("error occurred before error message processing is available\n");
        exit(2);
    }
 
    /*
     * Okay, crank up a stack entry to store the info in.
     */
 
    if (recursion_depth++ > 0 && elevel >= ERROR)
    {
        /*
         * Oops, error during error processing.  Clear ErrorContext as
         * discussed at top of file.  We will not return to the original
         * error's reporter or handler, so we don't need it.
         */
        MemoryContextReset(ErrorContext);
 
        /*
         * Infinite error recursion might be due to something broken in a
         * context traceback routine.  Abandon them too.  We also abandon
         * attempting to print the error statement (which, if long, could
         * itself be the source of the recursive failure).
         */
        if (in_error_recursion_trouble())
        {
            error_context_stack = NULL;
            debug_query_string = NULL;
        }
    }
 
    /* Initialize data for this error frame */
    edata = get_error_stack_entry();
    edata->elevel = elevel;
    edata->output_to_server = output_to_server;
    edata->output_to_client = output_to_client;
    set_stack_entry_domain(edata, domain);
    /* Select default errcode based on elevel */
    if (elevel >= ERROR)
        edata->sqlerrcode = ERRCODE_INTERNAL_ERROR;
    else if (elevel >= WARNING)
        edata->sqlerrcode = ERRCODE_WARNING;
    else
        edata->sqlerrcode = ERRCODE_SUCCESSFUL_COMPLETION;
 
    /*
     * Any allocations for this error state level should go into ErrorContext
     */
    edata->assoc_context = ErrorContext;
 
    recursion_depth--;
    return true;
}
 
/*
 * errfinish --- end an error-reporting cycle
 *
 * Produce the appropriate error report(s) and pop the error stack.
 *
 * If elevel, as passed to errstart(), is ERROR or worse, control does not
 * return to the caller.  See elog.h for the error level definitions.
 */
void
errfinish(const char *filename, int lineno, const char *funcname)
{
    ErrorData  *edata = &errordata[errordata_stack_depth];
    int         elevel;
    MemoryContext oldcontext;
    ErrorContextCallback *econtext;
 
    recursion_depth++;
    CHECK_STACK_DEPTH();
 
    /* Save the last few bits of error state into the stack entry */
    set_stack_entry_location(edata, filename, lineno, funcname);
 
    elevel = edata->elevel;
 
    /*
     * Do processing in ErrorContext, which we hope has enough reserved space
     * to report an error.
     */
    oldcontext = MemoryContextSwitchTo(ErrorContext);
 
    /* Collect backtrace, if enabled and we didn't already */
    if (!edata->backtrace &&
        edata->funcname &&
        backtrace_functions &&
        matches_backtrace_functions(edata->funcname))
        set_backtrace(edata, 2);
 
    /*
     * Call any context callback functions.  Errors occurring in callback
     * functions will be treated as recursive errors --- this ensures we will
     * avoid infinite recursion (see errstart).
     */
    for (econtext = error_context_stack;
         econtext != NULL;
         econtext = econtext->previous)
        econtext->callback(econtext->arg);
 
    /*
     * If ERROR (not more nor less) we pass it off to the current handler.
     * Printing it and popping the stack is the responsibility of the handler.
     */
    if (elevel == ERROR)
    {
        /*
         * We do some minimal cleanup before longjmp'ing so that handlers can
         * execute in a reasonably sane state.
         *
         * Reset InterruptHoldoffCount in case we ereport'd from inside an
         * interrupt holdoff section.  (We assume here that no handler will
         * itself be inside a holdoff section.  If necessary, such a handler
         * could save and restore InterruptHoldoffCount for itself, but this
         * should make life easier for most.)
         */
        InterruptHoldoffCount = 0;
        QueryCancelHoldoffCount = 0;
 
        CritSectionCount = 0;   /* should be unnecessary, but... */
 
        /*
         * Note that we leave CurrentMemoryContext set to ErrorContext. The
         * handler should reset it to something else soon.
         */
 
        recursion_depth--;
        PG_RE_THROW();
    }
 
    /* Emit the message to the right places */
    EmitErrorReport();
 
    /*
     * If this is the outermost recursion level, we can clean up by resetting
     * ErrorContext altogether (compare FlushErrorState), which is good
     * because it cleans up any random leakages that might have occurred in
     * places such as context callback functions.  If we're nested, we can
     * only safely remove the subsidiary data of the current stack entry.
     */
    if (errordata_stack_depth == 0 && recursion_depth == 1)
        MemoryContextReset(ErrorContext);
    else
        FreeErrorDataContents(edata);
 
    /* Release stack entry and exit error-handling context */
    errordata_stack_depth--;
    MemoryContextSwitchTo(oldcontext);
    recursion_depth--;
 
    /*
     * Perform error recovery action as specified by elevel.
     */
    if (elevel == FATAL)
    {
        /*
         * For a FATAL error, we let proc_exit clean up and exit.
         *
         * If we just reported a startup failure, the client will disconnect
         * on receiving it, so don't send any more to the client.
         */
        if (PG_exception_stack == NULL && whereToSendOutput == DestRemote)
            whereToSendOutput = DestNone;
 
        /*
         * fflush here is just to improve the odds that we get to see the
         * error message, in case things are so hosed that proc_exit crashes.
         * Any other code you might be tempted to add here should probably be
         * in an on_proc_exit or on_shmem_exit callback instead.
         */
        fflush(NULL);
 
        /*
         * Let the cumulative stats system know. Only mark the session as
         * terminated by fatal error if there is no other known cause.
         */
        if (pgStatSessionEndCause == DISCONNECT_NORMAL)
            pgStatSessionEndCause = DISCONNECT_FATAL;
 
        /*
         * Do normal process-exit cleanup, then return exit code 1 to indicate
         * FATAL termination.  The postmaster may or may not consider this
         * worthy of panic, depending on which subprocess returns it.
         */
        proc_exit(1);
    }
 
    if (elevel >= PANIC)
    {
        /*
         * Serious crash time. Postmaster will observe SIGABRT process exit
         * status and kill the other backends too.
         *
         * XXX: what if we are *in* the postmaster?  abort() won't kill our
         * children...
         */
        fflush(NULL);
        abort();
    }
 
    /*
     * Check for cancel/die interrupt first --- this is so that the user can
     * stop a query emitting tons of notice or warning messages, even if it's
     * in a loop that otherwise fails to check for interrupts.
     */
    CHECK_FOR_INTERRUPTS();
}
 
 
/*
 * errsave_start --- begin a "soft" error-reporting cycle
 *
 * If "context" isn't an ErrorSaveContext node, this behaves as
 * errstart(ERROR, domain), and the errsave() macro ends up acting
 * exactly like ereport(ERROR, ...).
 *
 * If "context" is an ErrorSaveContext node, but the node creator only wants
 * notification of the fact of a soft error without any details, we just set
 * the error_occurred flag in the ErrorSaveContext node and return false,
 * which will cause us to skip the remaining error processing steps.
 *
 * Otherwise, create and initialize error stack entry and return true.
 * Subsequently, errmsg() and perhaps other routines will be called to further
 * populate the stack entry.  Finally, errsave_finish() will be called to
 * tidy up.
 */
bool
errsave_start(struct Node *context, const char *domain)
{
    ErrorSaveContext *escontext;
    ErrorData  *edata;
 
    /*
     * Do we have a context for soft error reporting?  If not, just punt to
     * errstart().
     */
    if (context == NULL || !IsA(context, ErrorSaveContext))
        return errstart(ERROR, domain);
 
    /* Report that a soft error was detected */
    escontext = (ErrorSaveContext *) context;
    escontext->error_occurred = true;
 
    /* Nothing else to do if caller wants no further details */
    if (!escontext->details_wanted)
        return false;
 
    /*
     * Okay, crank up a stack entry to store the info in.
     */
 
    recursion_depth++;
 
    /* Initialize data for this error frame */
    edata = get_error_stack_entry();
    edata->elevel = LOG;        /* signal all is well to errsave_finish */
    set_stack_entry_domain(edata, domain);
    /* Select default errcode based on the assumed elevel of ERROR */
    edata->sqlerrcode = ERRCODE_INTERNAL_ERROR;
 
    /*
     * Any allocations for this error state level should go into the caller's
     * context.  We don't need to pollute ErrorContext, or even require it to
     * exist, in this code path.
     */
    edata->assoc_context = CurrentMemoryContext;
 
    recursion_depth--;
    return true;
}
 
/*
 * errsave_finish --- end a "soft" error-reporting cycle
 *
 * If errsave_start() decided this was a regular error, behave as
 * errfinish().  Otherwise, package up the error details and save
 * them in the ErrorSaveContext node.
 */
void
errsave_finish(struct Node *context, const char *filename, int lineno,
               const char *funcname)
{
    ErrorSaveContext *escontext = (ErrorSaveContext *) context;
    ErrorData  *edata = &errordata[errordata_stack_depth];
 
    /* verify stack depth before accessing *edata */
    CHECK_STACK_DEPTH();
 
    /*
     * If errsave_start punted to errstart, then elevel will be ERROR or
     * perhaps even PANIC.  Punt likewise to errfinish.
     */
    if (edata->elevel >= ERROR)
    {
        errfinish(filename, lineno, funcname);
        pg_unreachable();
    }
 
    /*
     * Else, we should package up the stack entry contents and deliver them to
     * the caller.
     */
    recursion_depth++;
 
    /* Save the last few bits of error state into the stack entry */
    set_stack_entry_location(edata, filename, lineno, funcname);
 
    /* Replace the LOG value that errsave_start inserted */
    edata->elevel = ERROR;
 
    /*
     * We skip calling backtrace and context functions, which are more likely
     * to cause trouble than provide useful context; they might act on the
     * assumption that a transaction abort is about to occur.
     */
 
    /*
     * Make a copy of the error info for the caller.  All the subsidiary
     * strings are already in the caller's context, so it's sufficient to
     * flat-copy the stack entry.
     */
    escontext->error_data = palloc_object(ErrorData);
    memcpy(escontext->error_data, edata, sizeof(ErrorData));
 
    /* Exit error-handling context */
    errordata_stack_depth--;
    recursion_depth--;
}
 
 
/*
 * get_error_stack_entry --- allocate and initialize a new stack entry
 *
 * The entry should be freed, when we're done with it, by calling
 * FreeErrorDataContents() and then decrementing errordata_stack_depth.
 *
 * Returning the entry's address is just a notational convenience,
 * since it had better be errordata[errordata_stack_depth].
 *
 * Although the error stack is not large, we don't expect to run out of space.
 * Using more than one entry implies a new error report during error recovery,
 * which is possible but already suggests we're in trouble.  If we exhaust the
 * stack, almost certainly we are in an infinite loop of errors during error
 * recovery, so we give up and PANIC.
 *
 * (Note that this is distinct from the recursion_depth checks, which
 * guard against recursion while handling a single stack entry.)
 */
static ErrorData *
get_error_stack_entry(void)
{
    ErrorData  *edata;
 
    /* Allocate error frame */
    errordata_stack_depth++;
    if (unlikely(errordata_stack_depth >= ERRORDATA_STACK_SIZE))
    {
        /* Wups, stack not big enough */
        errordata_stack_depth = -1; /* make room on stack */
        ereport(PANIC, (errmsg_internal("ERRORDATA_STACK_SIZE exceeded")));
    }
 
    /* Initialize error frame to all zeroes/NULLs */
    edata = &errordata[errordata_stack_depth];
    memset(edata, 0, sizeof(ErrorData));
 
    /* Save errno immediately to ensure error parameter eval can't change it */
    edata->saved_errno = errno;
 
    return edata;
}
 
/*
 * set_stack_entry_domain --- fill in the internationalization domain
 */
static void
set_stack_entry_domain(ErrorData *edata, const char *domain)
{
    /* the default text domain is the backend's */
    edata->domain = domain ? domain : PG_TEXTDOMAIN("postgres");
    /* initialize context_domain the same way (see set_errcontext_domain()) */
    edata->context_domain = edata->domain;
}
 
/*
 * set_stack_entry_location --- fill in code-location details
 *
 * Store the values of __FILE__, __LINE__, and __func__ from the call site.
 * We make an effort to normalize __FILE__, since compilers are inconsistent
 * about how much of the path they'll include, and we'd prefer that the
 * behavior not depend on that (especially, that it not vary with build path).
 */
static void
set_stack_entry_location(ErrorData *edata,
                         const char *filename, int lineno,
                         const char *funcname)
{
    if (filename)
    {
        const char *slash;
 
        /* keep only base name, useful especially for vpath builds */
        slash = strrchr(filename, '/');
        if (slash)
            filename = slash + 1;
        /* Some Windows compilers use backslashes in __FILE__ strings */
        slash = strrchr(filename, '\\');
        if (slash)
            filename = slash + 1;
    }
 
    edata->filename = filename;
    edata->lineno = lineno;
    edata->funcname = funcname;
}
 
/*
 * matches_backtrace_functions --- checks whether the given funcname matches
 * backtrace_functions
 *
 * See check_backtrace_functions.
 */
static bool
matches_backtrace_functions(const char *funcname)
{
    const char *p;
 
    if (!backtrace_function_list || funcname == NULL || funcname[0] == '\0')
        return false;
 
    p = backtrace_function_list;
    for (;;)
    {
        if (*p == '\0')         /* end of backtrace_function_list */
            break;
 
        if (strcmp(funcname, p) == 0)
            return true;
        p += strlen(p) + 1;
    }
 
    return false;
}
 
 
/*
 * errcode --- add SQLSTATE error code to the current error
 *
 * The code is expected to be represented as per MAKE_SQLSTATE().
 */
int
errcode(int sqlerrcode)
{
    ErrorData  *edata = &errordata[errordata_stack_depth];
 
    /* we don't bother incrementing recursion_depth */
    CHECK_STACK_DEPTH();
 
    edata->sqlerrcode = sqlerrcode;
 
    return 0;                   /* return value does not matter */
}
 
 
/*
 * errcode_for_file_access --- add SQLSTATE error code to the current error
 *
 * The SQLSTATE code is chosen based on the saved errno value.  We assume
 * that the failing operation was some type of disk file access.
 *
 * NOTE: the primary error message string should generally include %m
 * when this is used.
 */
int
errcode_for_file_access(void)
{
    ErrorData  *edata = &errordata[errordata_stack_depth];
 
    /* we don't bother incrementing recursion_depth */
    CHECK_STACK_DEPTH();
 
    switch (edata->saved_errno)
    {
            /* Permission-denied failures */
        case EPERM:             /* Not super-user */
        case EACCES:            /* Permission denied */
#ifdef EROFS
        case EROFS:             /* Read only file system */
#endif
            edata->sqlerrcode = ERRCODE_INSUFFICIENT_PRIVILEGE;
            break;
 
            /* File not found */
        case ENOENT:            /* No such file or directory */
            edata->sqlerrcode = ERRCODE_UNDEFINED_FILE;
            break;
 
            /* Duplicate file */
        case EEXIST:            /* File exists */
            edata->sqlerrcode = ERRCODE_DUPLICATE_FILE;
            break;
 
            /* Wrong object type or state */
        case ENOTDIR:           /* Not a directory */
        case EISDIR:            /* Is a directory */
        case ENOTEMPTY:         /* Directory not empty */
            edata->sqlerrcode = ERRCODE_WRONG_OBJECT_TYPE;
            break;
 
            /* Insufficient resources */
        case ENOSPC:            /* No space left on device */
            edata->sqlerrcode = ERRCODE_DISK_FULL;
            break;
 
        case ENOMEM:            /* Out of memory */
            edata->sqlerrcode = ERRCODE_OUT_OF_MEMORY;
            break;
 
        case ENFILE:            /* File table overflow */
        case EMFILE:            /* Too many open files */
            edata->sqlerrcode = ERRCODE_INSUFFICIENT_RESOURCES;
            break;
 
            /* Hardware failure */
        case EIO:               /* I/O error */
            edata->sqlerrcode = ERRCODE_IO_ERROR;
            break;
 
        case ENAMETOOLONG:      /* File name too long */
            edata->sqlerrcode = ERRCODE_FILE_NAME_TOO_LONG;
            break;
 
            /* All else is classified as internal errors */
        default:
            edata->sqlerrcode = ERRCODE_INTERNAL_ERROR;
            break;
    }
 
    return 0;                   /* return value does not matter */
}
 
/*
 * errcode_for_socket_access --- add SQLSTATE error code to the current error
 *
 * The SQLSTATE code is chosen based on the saved errno value.  We assume
 * that the failing operation was some type of socket access.
 *
 * NOTE: the primary error message string should generally include %m
 * when this is used.
 */
int
errcode_for_socket_access(void)
{
    ErrorData  *edata = &errordata[errordata_stack_depth];
 
    /* we don't bother incrementing recursion_depth */
    CHECK_STACK_DEPTH();
 
    switch (edata->saved_errno)
    {
            /* Loss of connection */
        case ALL_CONNECTION_FAILURE_ERRNOS:
            edata->sqlerrcode = ERRCODE_CONNECTION_FAILURE;
            break;
 
            /* All else is classified as internal errors */
        default:
            edata->sqlerrcode = ERRCODE_INTERNAL_ERROR;
            break;
    }
 
    return 0;                   /* return value does not matter */
}
 
 
/*
 * This macro handles expansion of a format string and associated parameters;
 * it's common code for errmsg(), errdetail(), etc.  Must be called inside
 * a routine that is declared like "const char *fmt, ..." and has an edata
 * pointer set up.  The message is assigned to edata->targetfield, or
 * appended to it if appendval is true.  The message is subject to translation
 * if translateit is true.
 *
 * Note: we pstrdup the buffer rather than just transferring its storage
 * to the edata field because the buffer might be considerably larger than
 * really necessary.
 */
#define EVALUATE_MESSAGE(domain, targetfield, appendval, translateit)   \
    { \
        StringInfoData  buf; \
        /* Internationalize the error format string */ \
        if ((translateit) && !in_error_recursion_trouble()) \
            fmt = dgettext((domain), fmt);                \
        initStringInfo(&buf); \
        if ((appendval) && edata->targetfield) { \
            appendStringInfoString(&buf, edata->targetfield); \
            appendStringInfoChar(&buf, '\n'); \
        } \
        /* Generate actual output --- have to use appendStringInfoVA */ \
        for (;;) \
        { \
            va_list     args; \
            int         needed; \
            errno = edata->saved_errno; \
            va_start(args, fmt); \
            needed = appendStringInfoVA(&buf, fmt, args); \
            va_end(args); \
            if (needed == 0) \
                break; \
            enlargeStringInfo(&buf, needed); \
        } \
        /* Save the completed message into the stack item */ \
        if (edata->targetfield) \
            pfree(edata->targetfield); \
        edata->targetfield = pstrdup(buf.data); \
        pfree(buf.data); \
    }
 
/*
 * Same as above, except for pluralized error messages.  The calling routine
 * must be declared like "const char *fmt_singular, const char *fmt_plural,
 * unsigned long n, ...".  Translation is assumed always wanted.
 */
#define EVALUATE_MESSAGE_PLURAL(domain, targetfield, appendval)  \
    { \
        const char     *fmt; \
        StringInfoData  buf; \
        /* Internationalize the error format string */ \
        if (!in_error_recursion_trouble()) \
            fmt = dngettext((domain), fmt_singular, fmt_plural, n); \
        else \
            fmt = (n == 1 ? fmt_singular : fmt_plural); \
        initStringInfo(&buf); \
        if ((appendval) && edata->targetfield) { \
            appendStringInfoString(&buf, edata->targetfield); \
            appendStringInfoChar(&buf, '\n'); \
        } \
        /* Generate actual output --- have to use appendStringInfoVA */ \
        for (;;) \
        { \
            va_list     args; \
            int         needed; \
            errno = edata->saved_errno; \
            va_start(args, n); \
            needed = appendStringInfoVA(&buf, fmt, args); \
            va_end(args); \
            if (needed == 0) \
                break; \
            enlargeStringInfo(&buf, needed); \
        } \
        /* Save the completed message into the stack item */ \
        if (edata->targetfield) \
            pfree(edata->targetfield); \
        edata->targetfield = pstrdup(buf.data); \
        pfree(buf.data); \
    }
 
 
/*
 * errmsg --- add a primary error message text to the current error
 *
 * In addition to the usual %-escapes recognized by printf, "%m" in
 * fmt is replaced by the error message for the caller's value of errno.
 *
 * Note: no newline is needed at the end of the fmt string, since
 * ereport will provide one for the output methods that need it.
 */
int
errmsg(const char *fmt,...)
{
    ErrorData  *edata = &errordata[errordata_stack_depth];
    MemoryContext oldcontext;
 
    recursion_depth++;
    CHECK_STACK_DEPTH();
    oldcontext = MemoryContextSwitchTo(edata->assoc_context);
 
    edata->message_id = fmt;
    EVALUATE_MESSAGE(edata->domain, message, false, true);
 
    MemoryContextSwitchTo(oldcontext);
    recursion_depth--;
    return 0;                   /* return value does not matter */
}
 
/*
 * Add a backtrace to the containing ereport() call.  This is intended to be
 * added temporarily during debugging.
 */
int
errbacktrace(void)
{
    ErrorData  *edata = &errordata[errordata_stack_depth];
    MemoryContext oldcontext;
 
    recursion_depth++;
    CHECK_STACK_DEPTH();
    oldcontext = MemoryContextSwitchTo(edata->assoc_context);
 
    set_backtrace(edata, 1);
 
    MemoryContextSwitchTo(oldcontext);
    recursion_depth--;
 
    return 0;
}
 
/*
 * Compute backtrace data and add it to the supplied ErrorData.  num_skip
 * specifies how many inner frames to skip.  Use this to avoid showing the
 * internal backtrace support functions in the backtrace.  This requires that
 * this and related functions are not inlined.
 */
static void
set_backtrace(ErrorData *edata, int num_skip)
{
    StringInfoData errtrace;
 
    initStringInfo(&errtrace);
 
#ifdef HAVE_BACKTRACE_SYMBOLS
    {
        void       *buf[100];
        int         nframes;
        char      **strfrms;
 
        nframes = backtrace(buf, lengthof(buf));
        strfrms = backtrace_symbols(buf, nframes);
        if (strfrms != NULL)
        {
            for (int i = num_skip; i < nframes; i++)
                appendStringInfo(&errtrace, "\n%s", strfrms[i]);
            free(strfrms);
        }
        else
            appendStringInfoString(&errtrace,
                                   "insufficient memory for backtrace generation");
    }
#else
    appendStringInfoString(&errtrace,
                           "backtrace generation is not supported by this installation");
#endif
 
    edata->backtrace = errtrace.data;
}
 
/*
 * errmsg_internal --- add a primary error message text to the current error
 *
 * This is exactly like errmsg() except that strings passed to errmsg_internal
 * are not translated, and are customarily left out of the
 * internationalization message dictionary.  This should be used for "can't
 * happen" cases that are probably not worth spending translation effort on.
 * We also use this for certain cases where we *must* not try to translate
 * the message because the translation would fail and result in infinite
 * error recursion.
 */
int
errmsg_internal(const char *fmt,...)
{
    ErrorData  *edata = &errordata[errordata_stack_depth];
    MemoryContext oldcontext;
 
    recursion_depth++;
    CHECK_STACK_DEPTH();
    oldcontext = MemoryContextSwitchTo(edata->assoc_context);
 
    edata->message_id = fmt;
    EVALUATE_MESSAGE(edata->domain, message, false, false);
 
    MemoryContextSwitchTo(oldcontext);
    recursion_depth--;
    return 0;                   /* return value does not matter */
}
 
 
/*
 * errmsg_plural --- add a primary error message text to the current error,
 * with support for pluralization of the message text
 */
int
errmsg_plural(const char *fmt_singular, const char *fmt_plural,
              unsigned long n,...)
{
    ErrorData  *edata = &errordata[errordata_stack_depth];
    MemoryContext oldcontext;
 
    recursion_depth++;
    CHECK_STACK_DEPTH();
    oldcontext = MemoryContextSwitchTo(edata->assoc_context);
 
    edata->message_id = fmt_singular;
    EVALUATE_MESSAGE_PLURAL(edata->domain, message, false);
 
    MemoryContextSwitchTo(oldcontext);
    recursion_depth--;
    return 0;                   /* return value does not matter */
}
 
 
/*
 * errdetail --- add a detail error message text to the current error
 */
int
errdetail(const char *fmt,...)
{
    ErrorData  *edata = &errordata[errordata_stack_depth];
    MemoryContext oldcontext;
 
    recursion_depth++;
    CHECK_STACK_DEPTH();
    oldcontext = MemoryContextSwitchTo(edata->assoc_context);
 
    EVALUATE_MESSAGE(edata->domain, detail, false, true);
 
    MemoryContextSwitchTo(oldcontext);
    recursion_depth--;
    return 0;                   /* return value does not matter */
}
 
 
/*
 * errdetail_internal --- add a detail error message text to the current error
 *
 * This is exactly like errdetail() except that strings passed to
 * errdetail_internal are not translated, and are customarily left out of the
 * internationalization message dictionary.  This should be used for detail
 * messages that seem not worth translating for one reason or another
 * (typically, that they don't seem to be useful to average users).
 */
int
errdetail_internal(const char *fmt,...)
{
    ErrorData  *edata = &errordata[errordata_stack_depth];
    MemoryContext oldcontext;
 
    recursion_depth++;
    CHECK_STACK_DEPTH();
    oldcontext = MemoryContextSwitchTo(edata->assoc_context);
 
    EVALUATE_MESSAGE(edata->domain, detail, false, false);
 
    MemoryContextSwitchTo(oldcontext);
    recursion_depth--;
    return 0;                   /* return value does not matter */
}
 
 
/*
 * errdetail_log --- add a detail_log error message text to the current error
 */
int
errdetail_log(const char *fmt,...)
{
    ErrorData  *edata = &errordata[errordata_stack_depth];
    MemoryContext oldcontext;
 
    recursion_depth++;
    CHECK_STACK_DEPTH();
    oldcontext = MemoryContextSwitchTo(edata->assoc_context);
 
    EVALUATE_MESSAGE(edata->domain, detail_log, false, true);
 
    MemoryContextSwitchTo(oldcontext);
    recursion_depth--;
    return 0;                   /* return value does not matter */
}
 
/*
 * errdetail_log_plural --- add a detail_log error message text to the current error
 * with support for pluralization of the message text
 */
int
errdetail_log_plural(const char *fmt_singular, const char *fmt_plural,
                     unsigned long n,...)
{
    ErrorData  *edata = &errordata[errordata_stack_depth];
    MemoryContext oldcontext;
 
    recursion_depth++;
    CHECK_STACK_DEPTH();
    oldcontext = MemoryContextSwitchTo(edata->assoc_context);
 
    EVALUATE_MESSAGE_PLURAL(edata->domain, detail_log, false);
 
    MemoryContextSwitchTo(oldcontext);
    recursion_depth--;
    return 0;                   /* return value does not matter */
}
 
 
/*
 * errdetail_plural --- add a detail error message text to the current error,
 * with support for pluralization of the message text
 */
int
errdetail_plural(const char *fmt_singular, const char *fmt_plural,
                 unsigned long n,...)
{
    ErrorData  *edata = &errordata[errordata_stack_depth];
    MemoryContext oldcontext;
 
    recursion_depth++;
    CHECK_STACK_DEPTH();
    oldcontext = MemoryContextSwitchTo(edata->assoc_context);
 
    EVALUATE_MESSAGE_PLURAL(edata->domain, detail, false);
 
    MemoryContextSwitchTo(oldcontext);
    recursion_depth--;
    return 0;                   /* return value does not matter */
}
 
 
/*
 * errhint --- add a hint error message text to the current error
 */
int
errhint(const char *fmt,...)
{
    ErrorData  *edata = &errordata[errordata_stack_depth];
    MemoryContext oldcontext;
 
    recursion_depth++;
    CHECK_STACK_DEPTH();
    oldcontext = MemoryContextSwitchTo(edata->assoc_context);
 
    EVALUATE_MESSAGE(edata->domain, hint, false, true);
 
    MemoryContextSwitchTo(oldcontext);
    recursion_depth--;
    return 0;                   /* return value does not matter */
}
 
/*
 * errhint_internal --- add a hint error message text to the current error
 *
 * Non-translated version of errhint(), see also errmsg_internal().
 */
int
errhint_internal(const char *fmt,...)
{
    ErrorData  *edata = &errordata[errordata_stack_depth];
    MemoryContext oldcontext;
 
    recursion_depth++;
    CHECK_STACK_DEPTH();
    oldcontext = MemoryContextSwitchTo(edata->assoc_context);
 
    EVALUATE_MESSAGE(edata->domain, hint, false, false);
 
    MemoryContextSwitchTo(oldcontext);
    recursion_depth--;
    return 0;                   /* return value does not matter */
}
 
/*
 * errhint_plural --- add a hint error message text to the current error,
 * with support for pluralization of the message text
 */
int
errhint_plural(const char *fmt_singular, const char *fmt_plural,
               unsigned long n,...)
{
    ErrorData  *edata = &errordata[errordata_stack_depth];
    MemoryContext oldcontext;
 
    recursion_depth++;
    CHECK_STACK_DEPTH();
    oldcontext = MemoryContextSwitchTo(edata->assoc_context);
 
    EVALUATE_MESSAGE_PLURAL(edata->domain, hint, false);
 
    MemoryContextSwitchTo(oldcontext);
    recursion_depth--;
    return 0;                   /* return value does not matter */
}
 
 
/*
 * errcontext_msg --- add a context error message text to the current error
 *
 * Unlike other cases, multiple calls are allowed to build up a stack of
 * context information.  We assume earlier calls represent more-closely-nested
 * states.
 */
int
errcontext_msg(const char *fmt,...)
{
    ErrorData  *edata = &errordata[errordata_stack_depth];
    MemoryContext oldcontext;
 
    recursion_depth++;
    CHECK_STACK_DEPTH();
    oldcontext = MemoryContextSwitchTo(edata->assoc_context);
 
    EVALUATE_MESSAGE(edata->context_domain, context, true, true);
 
    MemoryContextSwitchTo(oldcontext);
    recursion_depth--;
    return 0;                   /* return value does not matter */
}
 
/*
 * set_errcontext_domain --- set message domain to be used by errcontext()
 *
 * errcontext_msg() can be called from a different module than the original
 * ereport(), so we cannot use the message domain passed in errstart() to
 * translate it.  Instead, each errcontext_msg() call should be preceded by
 * a set_errcontext_domain() call to specify the domain.  This is usually
 * done transparently by the errcontext() macro.
 */
int
set_errcontext_domain(const char *domain)
{
    ErrorData  *edata = &errordata[errordata_stack_depth];
 
    /* we don't bother incrementing recursion_depth */
    CHECK_STACK_DEPTH();
 
    /* the default text domain is the backend's */
    edata->context_domain = domain ? domain : PG_TEXTDOMAIN("postgres");
 
    return 0;                   /* return value does not matter */
}
 
 
/*
 * errhidestmt --- optionally suppress STATEMENT: field of log entry
 *
 * This should be called if the message text already includes the statement.
 */
int
errhidestmt(bool hide_stmt)
{
    ErrorData  *edata = &errordata[errordata_stack_depth];
 
    /* we don't bother incrementing recursion_depth */
    CHECK_STACK_DEPTH();
 
    edata->hide_stmt = hide_stmt;
 
    return 0;                   /* return value does not matter */
}
 
/*
 * errhidecontext --- optionally suppress CONTEXT: field of log entry
 *
 * This should only be used for verbose debugging messages where the repeated
 * inclusion of context would bloat the log volume too much.
 */
int
errhidecontext(bool hide_ctx)
{
    ErrorData  *edata = &errordata[errordata_stack_depth];
 
    /* we don't bother incrementing recursion_depth */
    CHECK_STACK_DEPTH();
 
    edata->hide_ctx = hide_ctx;
 
    return 0;                   /* return value does not matter */
}
 
/*
 * errposition --- add cursor position to the current error
 */
int
errposition(int cursorpos)
{
    ErrorData  *edata = &errordata[errordata_stack_depth];
 
    /* we don't bother incrementing recursion_depth */
    CHECK_STACK_DEPTH();
 
    edata->cursorpos = cursorpos;
 
    return 0;                   /* return value does not matter */
}
 
/*
 * internalerrposition --- add internal cursor position to the current error
 */
int
internalerrposition(int cursorpos)
{
    ErrorData  *edata = &errordata[errordata_stack_depth];
 
    /* we don't bother incrementing recursion_depth */
    CHECK_STACK_DEPTH();
 
    edata->internalpos = cursorpos;
 
    return 0;                   /* return value does not matter */
}
 
/*
 * internalerrquery --- add internal query text to the current error
 *
 * Can also pass NULL to drop the internal query text entry.  This case
 * is intended for use in error callback subroutines that are editorializing
 * on the layout of the error report.
 */
int
internalerrquery(const char *query)
{
    ErrorData  *edata = &errordata[errordata_stack_depth];
 
    /* we don't bother incrementing recursion_depth */
    CHECK_STACK_DEPTH();
 
    if (edata->internalquery)
    {
        pfree(edata->internalquery);
        edata->internalquery = NULL;
    }
 
    if (query)
        edata->internalquery = MemoryContextStrdup(edata->assoc_context, query);
 
    return 0;                   /* return value does not matter */
}
 
/*
 * err_generic_string -- used to set individual ErrorData string fields
 * identified by PG_DIAG_xxx codes.
 *
 * This intentionally only supports fields that don't use localized strings,
 * so that there are no translation considerations.
 *
 * Most potential callers should not use this directly, but instead prefer
 * higher-level abstractions, such as errtablecol() (see relcache.c).
 */
int
err_generic_string(int field, const char *str)
{
    ErrorData  *edata = &errordata[errordata_stack_depth];
 
    /* we don't bother incrementing recursion_depth */
    CHECK_STACK_DEPTH();
 
    switch (field)
    {
        case PG_DIAG_SCHEMA_NAME:
            set_errdata_field(edata->assoc_context, &edata->schema_name, str);
            break;
        case PG_DIAG_TABLE_NAME:
            set_errdata_field(edata->assoc_context, &edata->table_name, str);
            break;
        case PG_DIAG_COLUMN_NAME:
            set_errdata_field(edata->assoc_context, &edata->column_name, str);
            break;
        case PG_DIAG_DATATYPE_NAME:
            set_errdata_field(edata->assoc_context, &edata->datatype_name, str);
            break;
        case PG_DIAG_CONSTRAINT_NAME:
            set_errdata_field(edata->assoc_context, &edata->constraint_name, str);
            break;
        default:
            elog(ERROR, "unsupported ErrorData field id: %d", field);
            break;
    }
 
    return 0;                   /* return value does not matter */
}
 
/*
 * set_errdata_field --- set an ErrorData string field
 */
static void
set_errdata_field(MemoryContextData *cxt, char **ptr, const char *str)
{
    Assert(*ptr == NULL);
    *ptr = MemoryContextStrdup(cxt, str);
}
 
/*
 * geterrcode --- return the currently set SQLSTATE error code
 *
 * This is only intended for use in error callback subroutines, since there
 * is no other place outside elog.c where the concept is meaningful.
 */
int
geterrcode(void)
{
    ErrorData  *edata = &errordata[errordata_stack_depth];
 
    /* we don't bother incrementing recursion_depth */
    CHECK_STACK_DEPTH();
 
    return edata->sqlerrcode;
}
 
/*
 * geterrposition --- return the currently set error position (0 if none)
 *
 * This is only intended for use in error callback subroutines, since there
 * is no other place outside elog.c where the concept is meaningful.
 */
int
geterrposition(void)
{
    ErrorData  *edata = &errordata[errordata_stack_depth];
 
    /* we don't bother incrementing recursion_depth */
    CHECK_STACK_DEPTH();
 
    return edata->cursorpos;
}
 
/*
 * getinternalerrposition --- same for internal error position
 *
 * This is only intended for use in error callback subroutines, since there
 * is no other place outside elog.c where the concept is meaningful.
 */
int
getinternalerrposition(void)
{
    ErrorData  *edata = &errordata[errordata_stack_depth];
 
    /* we don't bother incrementing recursion_depth */
    CHECK_STACK_DEPTH();
 
    return edata->internalpos;
}
 
 
/*
 * Functions to allow construction of error message strings separately from
 * the ereport() call itself.
 *
 * The expected calling convention is
 *
 *  pre_format_elog_string(errno, domain), var = format_elog_string(format,...)
 *
 * which can be hidden behind a macro such as GUC_check_errdetail().  We
 * assume that any functions called in the arguments of format_elog_string()
 * cannot result in re-entrant use of these functions --- otherwise the wrong
 * text domain might be used, or the wrong errno substituted for %m.  This is
 * okay for the current usage with GUC check hooks, but might need further
 * effort someday.
 *
 * The result of format_elog_string() is stored in ErrorContext, and will
 * therefore survive until FlushErrorState() is called.
 */
static int  save_format_errnumber;
static const char *save_format_domain;
 
void
pre_format_elog_string(int errnumber, const char *domain)
{
    /* Save errno before evaluation of argument functions can change it */
    save_format_errnumber = errnumber;
    /* Save caller's text domain */
    save_format_domain = domain;
}
 
char *
format_elog_string(const char *fmt,...)
{
    ErrorData   errdata;
    ErrorData  *edata;
    MemoryContext oldcontext;
 
    /* Initialize a mostly-dummy error frame */
    edata = &errdata;
    MemSet(edata, 0, sizeof(ErrorData));
    /* the default text domain is the backend's */
    edata->domain = save_format_domain ? save_format_domain : PG_TEXTDOMAIN("postgres");
    /* set the errno to be used to interpret %m */
    edata->saved_errno = save_format_errnumber;
 
    oldcontext = MemoryContextSwitchTo(ErrorContext);
 
    edata->message_id = fmt;
    EVALUATE_MESSAGE(edata->domain, message, false, true);
 
    MemoryContextSwitchTo(oldcontext);
 
    return edata->message;
}
 
 
/*
 * Actual output of the top-of-stack error message
 *
 * In the ereport(ERROR) case this is called from PostgresMain (or not at all,
 * if the error is caught by somebody).  For all other severity levels this
 * is called by errfinish.
 */
void
EmitErrorReport(void)
{
    ErrorData  *edata = &errordata[errordata_stack_depth];
    MemoryContext oldcontext;
 
    recursion_depth++;
    CHECK_STACK_DEPTH();
    oldcontext = MemoryContextSwitchTo(edata->assoc_context);
 
    /*
     * Reset the formatted timestamp fields before emitting any logs.  This
     * includes all the log destinations and emit_log_hook, as the latter
     * could use log_line_prefix or the formatted timestamps.
     */
    saved_timeval_set = false;
    formatted_log_time[0] = '\0';
 
    /*
     * Call hook before sending message to log.  The hook function is allowed
     * to turn off edata->output_to_server, so we must recheck that afterward.
     * Making any other change in the content of edata is not considered
     * supported.
     *
     * Note: the reason why the hook can only turn off output_to_server, and
     * not turn it on, is that it'd be unreliable: we will never get here at
     * all if errstart() deems the message uninteresting.  A hook that could
     * make decisions in that direction would have to hook into errstart(),
     * where it would have much less information available.  emit_log_hook is
     * intended for custom log filtering and custom log message transmission
     * mechanisms.
     *
     * The log hook has access to both the translated and original English
     * error message text, which is passed through to allow it to be used as a
     * message identifier. Note that the original text is not available for
     * detail, detail_log, hint and context text elements.
     */
    if (edata->output_to_server && emit_log_hook)
        (*emit_log_hook) (edata);
 
    /* Send to server log, if enabled */
    if (edata->output_to_server)
        send_message_to_server_log(edata);
 
    /* Send to client, if enabled */
    if (edata->output_to_client)
        send_message_to_frontend(edata);
 
    MemoryContextSwitchTo(oldcontext);
    recursion_depth--;
}
 
/*
 * CopyErrorData --- obtain a copy of the topmost error stack entry
 *
 * This is only for use in error handler code.  The data is copied into the
 * current memory context, so callers should always switch away from
 * ErrorContext first; otherwise it will be lost when FlushErrorState is done.
 */
ErrorData *
CopyErrorData(void)
{
    ErrorData  *edata = &errordata[errordata_stack_depth];
    ErrorData  *newedata;
 
    /*
     * we don't increment recursion_depth because out-of-memory here does not
     * indicate a problem within the error subsystem.
     */
    CHECK_STACK_DEPTH();
 
    Assert(CurrentMemoryContext != ErrorContext);
 
    /* Copy the struct itself */
    newedata = (ErrorData *) palloc(sizeof(ErrorData));
    memcpy(newedata, edata, sizeof(ErrorData));
 
    /*
     * Make copies of separately-allocated strings.  Note that we copy even
     * theoretically-constant strings such as filename.  This is because those
     * could point into JIT-created code segments that might get unloaded at
     * transaction cleanup.  In some cases we need the copied ErrorData to
     * survive transaction boundaries, so we'd better copy those strings too.
     */
    if (newedata->filename)
        newedata->filename = pstrdup(newedata->filename);
    if (newedata->funcname)
        newedata->funcname = pstrdup(newedata->funcname);
    if (newedata->domain)
        newedata->domain = pstrdup(newedata->domain);
    if (newedata->context_domain)
        newedata->context_domain = pstrdup(newedata->context_domain);
    if (newedata->message)
        newedata->message = pstrdup(newedata->message);
    if (newedata->detail)
        newedata->detail = pstrdup(newedata->detail);
    if (newedata->detail_log)
        newedata->detail_log = pstrdup(newedata->detail_log);
    if (newedata->hint)
        newedata->hint = pstrdup(newedata->hint);
    if (newedata->context)
        newedata->context = pstrdup(newedata->context);
    if (newedata->backtrace)
        newedata->backtrace = pstrdup(newedata->backtrace);
    if (newedata->message_id)
        newedata->message_id = pstrdup(newedata->message_id);
    if (newedata->schema_name)
        newedata->schema_name = pstrdup(newedata->schema_name);
    if (newedata->table_name)
        newedata->table_name = pstrdup(newedata->table_name);
    if (newedata->column_name)
        newedata->column_name = pstrdup(newedata->column_name);
    if (newedata->datatype_name)
        newedata->datatype_name = pstrdup(newedata->datatype_name);
    if (newedata->constraint_name)
        newedata->constraint_name = pstrdup(newedata->constraint_name);
    if (newedata->internalquery)
        newedata->internalquery = pstrdup(newedata->internalquery);
 
    /* Use the calling context for string allocation */
    newedata->assoc_context = CurrentMemoryContext;
 
    return newedata;
}
 
/*
 * FreeErrorData --- free the structure returned by CopyErrorData.
 *
 * Error handlers should use this in preference to assuming they know all
 * the separately-allocated fields.
 */
void
FreeErrorData(ErrorData *edata)
{
    FreeErrorDataContents(edata);
    pfree(edata);
}
 
/*
 * FreeErrorDataContents --- free the subsidiary data of an ErrorData.
 *
 * This can be used on either an error stack entry or a copied ErrorData.
 */
static void
FreeErrorDataContents(ErrorData *edata)
{
    if (edata->message)
        pfree(edata->message);
    if (edata->detail)
        pfree(edata->detail);
    if (edata->detail_log)
        pfree(edata->detail_log);
    if (edata->hint)
        pfree(edata->hint);
    if (edata->context)
        pfree(edata->context);
    if (edata->backtrace)
        pfree(edata->backtrace);
    if (edata->schema_name)
        pfree(edata->schema_name);
    if (edata->table_name)
        pfree(edata->table_name);
    if (edata->column_name)
        pfree(edata->column_name);
    if (edata->datatype_name)
        pfree(edata->datatype_name);
    if (edata->constraint_name)
        pfree(edata->constraint_name);
    if (edata->internalquery)
        pfree(edata->internalquery);
}
 
/*
 * FlushErrorState --- flush the error state after error recovery
 *
 * This should be called by an error handler after it's done processing
 * the error; or as soon as it's done CopyErrorData, if it intends to
 * do stuff that is likely to provoke another error.  You are not "out" of
 * the error subsystem until you have done this.
 */
void
FlushErrorState(void)
{
    /*
     * Reset stack to empty.  The only case where it would be more than one
     * deep is if we serviced an error that interrupted construction of
     * another message.  We assume control escaped out of that message
     * construction and won't ever go back.
     */
    errordata_stack_depth = -1;
    recursion_depth = 0;
    /* Delete all data in ErrorContext */
    MemoryContextReset(ErrorContext);
}
 
/*
 * ThrowErrorData --- report an error described by an ErrorData structure
 *
 * This function should be called on an ErrorData structure that isn't stored
 * on the errordata stack and hasn't been processed yet. It will call
 * errstart() and errfinish() as needed, so those should not have already been
 * called.
 *
 * ThrowErrorData() is useful for handling soft errors. It's also useful for
 * re-reporting errors originally reported by background worker processes and
 * then propagated (with or without modification) to the backend responsible
 * for them.
 */
void
ThrowErrorData(ErrorData *edata)
{
    ErrorData  *newedata;
    MemoryContext oldcontext;
 
    if (!errstart(edata->elevel, edata->domain))
        return;                 /* error is not to be reported at all */
 
    newedata = &errordata[errordata_stack_depth];
    recursion_depth++;
    oldcontext = MemoryContextSwitchTo(newedata->assoc_context);
 
    /* Copy the supplied fields to the error stack entry. */
    if (edata->sqlerrcode != 0)
        newedata->sqlerrcode = edata->sqlerrcode;
    if (edata->message)
        newedata->message = pstrdup(edata->message);
    if (edata->detail)
        newedata->detail = pstrdup(edata->detail);
    if (edata->detail_log)
        newedata->detail_log = pstrdup(edata->detail_log);
    if (edata->hint)
        newedata->hint = pstrdup(edata->hint);
    if (edata->context)
        newedata->context = pstrdup(edata->context);
    if (edata->backtrace)
        newedata->backtrace = pstrdup(edata->backtrace);
    /* assume message_id is not available */
    if (edata->schema_name)
        newedata->schema_name = pstrdup(edata->schema_name);
    if (edata->table_name)
        newedata->table_name = pstrdup(edata->table_name);
    if (edata->column_name)
        newedata->column_name = pstrdup(edata->column_name);
    if (edata->datatype_name)
        newedata->datatype_name = pstrdup(edata->datatype_name);
    if (edata->constraint_name)
        newedata->constraint_name = pstrdup(edata->constraint_name);
    newedata->cursorpos = edata->cursorpos;
    newedata->internalpos = edata->internalpos;
    if (edata->internalquery)
        newedata->internalquery = pstrdup(edata->internalquery);
 
    MemoryContextSwitchTo(oldcontext);
    recursion_depth--;
 
    /* Process the error. */
    errfinish(edata->filename, edata->lineno, edata->funcname);
}
 
/*
 * ReThrowError --- re-throw a previously copied error
 *
 * A handler can do CopyErrorData/FlushErrorState to get out of the error
 * subsystem, then do some processing, and finally ReThrowError to re-throw
 * the original error.  This is slower than just PG_RE_THROW() but should
 * be used if the "some processing" is likely to incur another error.
 */
void
ReThrowError(ErrorData *edata)
{
    ErrorData  *newedata;
 
    Assert(edata->elevel == ERROR);
 
    /* Push the data back into the error context */
    recursion_depth++;
    MemoryContextSwitchTo(ErrorContext);
 
    newedata = get_error_stack_entry();
    memcpy(newedata, edata, sizeof(ErrorData));
 
    /* Make copies of separately-allocated fields */
    if (newedata->message)
        newedata->message = pstrdup(newedata->message);
    if (newedata->detail)
        newedata->detail = pstrdup(newedata->detail);
    if (newedata->detail_log)
        newedata->detail_log = pstrdup(newedata->detail_log);
    if (newedata->hint)
        newedata->hint = pstrdup(newedata->hint);
    if (newedata->context)
        newedata->context = pstrdup(newedata->context);
    if (newedata->backtrace)
        newedata->backtrace = pstrdup(newedata->backtrace);
    if (newedata->schema_name)
        newedata->schema_name = pstrdup(newedata->schema_name);
    if (newedata->table_name)
        newedata->table_name = pstrdup(newedata->table_name);
    if (newedata->column_name)
        newedata->column_name = pstrdup(newedata->column_name);
    if (newedata->datatype_name)
        newedata->datatype_name = pstrdup(newedata->datatype_name);
    if (newedata->constraint_name)
        newedata->constraint_name = pstrdup(newedata->constraint_name);
    if (newedata->internalquery)
        newedata->internalquery = pstrdup(newedata->internalquery);
 
    /* Reset the assoc_context to be ErrorContext */
    newedata->assoc_context = ErrorContext;
 
    recursion_depth--;
    PG_RE_THROW();
}
 
/*
 * pg_re_throw --- out-of-line implementation of PG_RE_THROW() macro
 */
void
pg_re_throw(void)
{
    /* If possible, throw the error to the next outer setjmp handler */
    if (PG_exception_stack != NULL)
        siglongjmp(*PG_exception_stack, 1);
    else
    {
        /*
         * If we get here, elog(ERROR) was thrown inside a PG_TRY block, which
         * we have now exited only to discover that there is no outer setjmp
         * handler to pass the error to.  Had the error been thrown outside
         * the block to begin with, we'd have promoted the error to FATAL, so
         * the correct behavior is to make it FATAL now; that is, emit it and
         * then call proc_exit.
         */
        ErrorData  *edata = &errordata[errordata_stack_depth];
 
        Assert(errordata_stack_depth >= 0);
        Assert(edata->elevel == ERROR);
        edata->elevel = FATAL;
 
        /*
         * At least in principle, the increase in severity could have changed
         * where-to-output decisions, so recalculate.
         */
        edata->output_to_server = should_output_to_server(FATAL);
        edata->output_to_client = should_output_to_client(FATAL);
 
        /*
         * We can use errfinish() for the rest, but we don't want it to call
         * any error context routines a second time.  Since we know we are
         * about to exit, it should be OK to just clear the context stack.
         */
        error_context_stack = NULL;
 
        errfinish(edata->filename, edata->lineno, edata->funcname);
    }
 
    /* Doesn't return ... */
    ExceptionalCondition("pg_re_throw tried to return", __FILE__, __LINE__);
}
 
 
/*
 * GetErrorContextStack - Return the context stack, for display/diags
 *
 * Returns a pstrdup'd string in the caller's context which includes the PG
 * error call stack.  It is the caller's responsibility to ensure this string
 * is pfree'd (or its context cleaned up) when done.
 *
 * This information is collected by traversing the error contexts and calling
 * each context's callback function, each of which is expected to call
 * errcontext() to return a string which can be presented to the user.
 */
char *
GetErrorContextStack(void)
{
    ErrorData  *edata;
    ErrorContextCallback *econtext;
 
    /*
     * Crank up a stack entry to store the info in.
     */
    recursion_depth++;
 
    edata = get_error_stack_entry();
 
    /*
     * Set up assoc_context to be the caller's context, so any allocations
     * done (which will include edata->context) will use their context.
     */
    edata->assoc_context = CurrentMemoryContext;
 
    /*
     * Call any context callback functions to collect the context information
     * into edata->context.
     *
     * Errors occurring in callback functions should go through the regular
     * error handling code which should handle any recursive errors, though we
     * double-check above, just in case.
     */
    for (econtext = error_context_stack;
         econtext != NULL;
         econtext = econtext->previous)
        econtext->callback(econtext->arg);
 
    /*
     * Clean ourselves off the stack, any allocations done should have been
     * using edata->assoc_context, which we set up earlier to be the caller's
     * context, so we're free to just remove our entry off the stack and
     * decrement recursion depth and exit.
     */
    errordata_stack_depth--;
    recursion_depth--;
 
    /*
     * Return a pointer to the string the caller asked for, which should have
     * been allocated in their context.
     */
    return edata->context;
}
 
 
/*
 * Initialization of error output file
 */
void
DebugFileOpen(void)
{
    int         fd,
                istty;
 
    if (OutputFileName[0])
    {
        /*
         * A debug-output file name was given.
         *
         * Make sure we can write the file, and find out if it's a tty.
         */
        if ((fd = open(OutputFileName, O_CREAT | O_APPEND | O_WRONLY,
                       0666)) < 0)
            ereport(FATAL,
                    (errcode_for_file_access(),
                     errmsg("could not open file \"%s\": %m", OutputFileName)));
        istty = isatty(fd);
        close(fd);
 
        /*
         * Redirect our stderr to the debug output file.
         */
        if (!freopen(OutputFileName, "a", stderr))
            ereport(FATAL,
                    (errcode_for_file_access(),
                     errmsg("could not reopen file \"%s\" as stderr: %m",
                            OutputFileName)));
 
        /*
         * If the file is a tty and we're running under the postmaster, try to
         * send stdout there as well (if it isn't a tty then stderr will block
         * out stdout, so we may as well let stdout go wherever it was going
         * before).
         */
        if (istty && IsUnderPostmaster)
            if (!freopen(OutputFileName, "a", stdout))
                ereport(FATAL,
                        (errcode_for_file_access(),
                         errmsg("could not reopen file \"%s\" as stdout: %m",
                                OutputFileName)));
    }
}
 
 
/*
 * GUC check_hook for backtrace_functions
 *
 * We split the input string, where commas separate function names
 * and certain whitespace chars are ignored, into a \0-separated (and
 * \0\0-terminated) list of function names.  This formulation allows
 * easy scanning when an error is thrown while avoiding the use of
 * non-reentrant strtok(), as well as keeping the output data in a
 * single palloc() chunk.
 */
bool
check_backtrace_functions(char **newval, void **extra, GucSource source)
{
    int         newvallen = strlen(*newval);
    char       *someval;
    int         validlen;
    int         i;
    int         j;
 
    /*
     * Allow characters that can be C identifiers and commas as separators, as
     * well as some whitespace for readability.
     */
    validlen = strspn(*newval,
                      "0123456789_"
                      "abcdefghijklmnopqrstuvwxyz"
                      "ABCDEFGHIJKLMNOPQRSTUVWXYZ"
                      ", \n\t");
    if (validlen != newvallen)
    {
        GUC_check_errdetail("Invalid character.");
        return false;
    }
 
    if (*newval[0] == '\0')
    {
        *extra = NULL;
        return true;
    }
 
    /*
     * Allocate space for the output and create the copy.  We could discount
     * whitespace chars to save some memory, but it doesn't seem worth the
     * trouble.
     */
    someval = guc_malloc(LOG, newvallen + 1 + 1);
    if (!someval)
        return false;
    for (i = 0, j = 0; i < newvallen; i++)
    {
        if ((*newval)[i] == ',')
            someval[j++] = '\0';    /* next item */
        else if ((*newval)[i] == ' ' ||
                 (*newval)[i] == '\n' ||
                 (*newval)[i] == '\t')
            ;                   /* ignore these */
        else
            someval[j++] = (*newval)[i];    /* copy anything else */
    }
 
    /* two \0s end the setting */
    someval[j] = '\0';
    someval[j + 1] = '\0';
 
    *extra = someval;
    return true;
}
 
/*
 * GUC assign_hook for backtrace_functions
 */
void
assign_backtrace_functions(const char *newval, void *extra)
{
    backtrace_function_list = (char *) extra;
}
 
/*
 * GUC check_hook for log_destination
 */
bool
check_log_destination(char **newval, void **extra, GucSource source)
{
    char       *rawstring;
    List       *elemlist;
    ListCell   *l;
    int         newlogdest = 0;
    int        *myextra;
 
    /* Need a modifiable copy of string */
    rawstring = pstrdup(*newval);
 
    /* Parse string into list of identifiers */
    if (!SplitIdentifierString(rawstring, ',', &elemlist))
    {
        /* syntax error in list */
        GUC_check_errdetail("List syntax is invalid.");
        pfree(rawstring);
        list_free(elemlist);
        return false;
    }
 
    foreach(l, elemlist)
    {
        char       *tok = (char *) lfirst(l);
 
        if (pg_strcasecmp(tok, "stderr") == 0)
            newlogdest |= LOG_DESTINATION_STDERR;
        else if (pg_strcasecmp(tok, "csvlog") == 0)
            newlogdest |= LOG_DESTINATION_CSVLOG;
        else if (pg_strcasecmp(tok, "jsonlog") == 0)
            newlogdest |= LOG_DESTINATION_JSONLOG;
#ifdef HAVE_SYSLOG
        else if (pg_strcasecmp(tok, "syslog") == 0)
            newlogdest |= LOG_DESTINATION_SYSLOG;
#endif
#ifdef WIN32
        else if (pg_strcasecmp(tok, "eventlog") == 0)
            newlogdest |= LOG_DESTINATION_EVENTLOG;
#endif
        else
        {
            GUC_check_errdetail("Unrecognized key word: \"%s\".", tok);
            pfree(rawstring);
            list_free(elemlist);
            return false;
        }
    }
 
    pfree(rawstring);
    list_free(elemlist);
 
    myextra = (int *) guc_malloc(LOG, sizeof(int));
    if (!myextra)
        return false;
    *myextra = newlogdest;
    *extra = myextra;
 
    return true;
}
 
/*
 * GUC assign_hook for log_destination
 */
void
assign_log_destination(const char *newval, void *extra)
{
    Log_destination = *((int *) extra);
}
 
/*
 * GUC assign_hook for syslog_ident
 */
void
assign_syslog_ident(const char *newval, void *extra)
{
#ifdef HAVE_SYSLOG
    /*
     * guc.c is likely to call us repeatedly with same parameters, so don't
     * thrash the syslog connection unnecessarily.  Also, we do not re-open
     * the connection until needed, since this routine will get called whether
     * or not Log_destination actually mentions syslog.
     *
     * Note that we make our own copy of the ident string rather than relying
     * on guc.c's.  This may be overly paranoid, but it ensures that we cannot
     * accidentally free a string that syslog is still using.
     */
    if (syslog_ident == NULL || strcmp(syslog_ident, newval) != 0)
    {
        if (openlog_done)
        {
            closelog();
            openlog_done = false;
        }
        free(syslog_ident);
        syslog_ident = strdup(newval);
        /* if the strdup fails, we will cope in write_syslog() */
    }
#endif
    /* Without syslog support, just ignore it */
}
 
/*
 * GUC assign_hook for syslog_facility
 */
void
assign_syslog_facility(int newval, void *extra)
{
#ifdef HAVE_SYSLOG
    /*
     * As above, don't thrash the syslog connection unnecessarily.
     */
    if (syslog_facility != newval)
    {
        if (openlog_done)
        {
            closelog();
            openlog_done = false;
        }
        syslog_facility = newval;
    }
#endif
    /* Without syslog support, just ignore it */
}
 
#ifdef HAVE_SYSLOG
 
/*
 * Write a message line to syslog
 */
static void
write_syslog(int level, const char *line)
{
    static unsigned long seq = 0;
 
    int         len;
    const char *nlpos;
 
    /* Open syslog connection if not done yet */
    if (!openlog_done)
    {
        openlog(syslog_ident ? syslog_ident : "postgres",
                LOG_PID | LOG_NDELAY | LOG_NOWAIT,
                syslog_facility);
        openlog_done = true;
    }
 
    /*
     * We add a sequence number to each log message to suppress "same"
     * messages.
     */
    seq++;
 
    /*
     * Our problem here is that many syslog implementations don't handle long
     * messages in an acceptable manner. While this function doesn't help that
     * fact, it does work around by splitting up messages into smaller pieces.
     *
     * We divide into multiple syslog() calls if message is too long or if the
     * message contains embedded newline(s).
     */
    len = strlen(line);
    nlpos = strchr(line, '\n');
    if (syslog_split_messages && (len > PG_SYSLOG_LIMIT || nlpos != NULL))
    {
        int         chunk_nr = 0;
 
        while (len > 0)
        {
            char        buf[PG_SYSLOG_LIMIT + 1];
            int         buflen;
            int         i;
 
            /* if we start at a newline, move ahead one char */
            if (line[0] == '\n')
            {
                line++;
                len--;
                /* we need to recompute the next newline's position, too */
                nlpos = strchr(line, '\n');
                continue;
            }
 
            /* copy one line, or as much as will fit, to buf */
            if (nlpos != NULL)
                buflen = nlpos - line;
            else
                buflen = len;
            buflen = Min(buflen, PG_SYSLOG_LIMIT);
            memcpy(buf, line, buflen);
            buf[buflen] = '\0';
 
            /* trim to multibyte letter boundary */
            buflen = pg_mbcliplen(buf, buflen, buflen);
            if (buflen <= 0)
                return;
            buf[buflen] = '\0';
 
            /* already word boundary? */
            if (line[buflen] != '\0' &&
                !isspace((unsigned char) line[buflen]))
            {
                /* try to divide at word boundary */
                i = buflen - 1;
                while (i > 0 && !isspace((unsigned char) buf[i]))
                    i--;
 
                if (i > 0)      /* else couldn't divide word boundary */
                {
                    buflen = i;
                    buf[i] = '\0';
                }
            }
 
            chunk_nr++;
 
            if (syslog_sequence_numbers)
                syslog(level, "[%lu-%d] %s", seq, chunk_nr, buf);
            else
                syslog(level, "[%d] %s", chunk_nr, buf);
 
            line += buflen;
            len -= buflen;
        }
    }
    else
    {
        /* message short enough */
        if (syslog_sequence_numbers)
            syslog(level, "[%lu] %s", seq, line);
        else
            syslog(level, "%s", line);
    }
}
#endif                          /* HAVE_SYSLOG */
 
#ifdef WIN32
/*
 * Get the PostgreSQL equivalent of the Windows ANSI code page.  "ANSI" system
 * interfaces (e.g. CreateFileA()) expect string arguments in this encoding.
 * Every process in a given system will find the same value at all times.
 */
static int
GetACPEncoding(void)
{
    static int  encoding = -2;
 
    if (encoding == -2)
        encoding = pg_codepage_to_encoding(GetACP());
 
    return encoding;
}
 
/*
 * Write a message line to the windows event log
 */
static void
write_eventlog(int level, const char *line, int len)
{
    WCHAR      *utf16;
    int         eventlevel = EVENTLOG_ERROR_TYPE;
    static HANDLE evtHandle = INVALID_HANDLE_VALUE;
 
    if (evtHandle == INVALID_HANDLE_VALUE)
    {
        evtHandle = RegisterEventSource(NULL,
                                        event_source ? event_source : DEFAULT_EVENT_SOURCE);
        if (evtHandle == NULL)
        {
            evtHandle = INVALID_HANDLE_VALUE;
            return;
        }
    }
 
    switch (level)
    {
        case DEBUG5:
        case DEBUG4:
        case DEBUG3:
        case DEBUG2:
        case DEBUG1:
        case LOG:
        case LOG_SERVER_ONLY:
        case INFO:
        case NOTICE:
            eventlevel = EVENTLOG_INFORMATION_TYPE;
            break;
        case WARNING:
        case WARNING_CLIENT_ONLY:
            eventlevel = EVENTLOG_WARNING_TYPE;
            break;
        case ERROR:
        case FATAL:
        case PANIC:
        default:
            eventlevel = EVENTLOG_ERROR_TYPE;
            break;
    }
 
    /*
     * If message character encoding matches the encoding expected by
     * ReportEventA(), call it to avoid the hazards of conversion.  Otherwise,
     * try to convert the message to UTF16 and write it with ReportEventW().
     * Fall back on ReportEventA() if conversion failed.
     *
     * Since we palloc the structure required for conversion, also fall
     * through to writing unconverted if we have not yet set up
     * CurrentMemoryContext.
     *
     * Also verify that we are not on our way into error recursion trouble due
     * to error messages thrown deep inside pgwin32_message_to_UTF16().
     */
    if (!in_error_recursion_trouble() &&
        CurrentMemoryContext != NULL &&
        GetMessageEncoding() != GetACPEncoding())
    {
        utf16 = pgwin32_message_to_UTF16(line, len, NULL);
        if (utf16)
        {
            ReportEventW(evtHandle,
                         eventlevel,
                         0,
                         0,     /* All events are Id 0 */
                         NULL,
                         1,
                         0,
                         (LPCWSTR *) &utf16,
                         NULL);
            /* XXX Try ReportEventA() when ReportEventW() fails? */
 
            pfree(utf16);
            return;
        }
    }
    ReportEventA(evtHandle,
                 eventlevel,
                 0,
                 0,             /* All events are Id 0 */
                 NULL,
                 1,
                 0,
                 &line,
                 NULL);
}
#endif                          /* WIN32 */
 
static void
write_console(const char *line, int len)
{
    int         rc;
 
#ifdef WIN32
 
    /*
     * Try to convert the message to UTF16 and write it with WriteConsoleW().
     * Fall back on write() if anything fails.
     *
     * In contrast to write_eventlog(), don't skip straight to write() based
     * on the applicable encodings.  Unlike WriteConsoleW(), write() depends
     * on the suitability of the console output code page.  Since we put
     * stderr into binary mode in SubPostmasterMain(), write() skips the
     * necessary translation anyway.
     *
     * WriteConsoleW() will fail if stderr is redirected, so just fall through
     * to writing unconverted to the logfile in this case.
     *
     * Since we palloc the structure required for conversion, also fall
     * through to writing unconverted if we have not yet set up
     * CurrentMemoryContext.
     */
    if (!in_error_recursion_trouble() &&
        !redirection_done &&
        CurrentMemoryContext != NULL)
    {
        WCHAR      *utf16;
        int         utf16len;
 
        utf16 = pgwin32_message_to_UTF16(line, len, &utf16len);
        if (utf16 != NULL)
        {
            HANDLE      stdHandle;
            DWORD       written;
 
            stdHandle = GetStdHandle(STD_ERROR_HANDLE);
            if (WriteConsoleW(stdHandle, utf16, utf16len, &written, NULL))
            {
                pfree(utf16);
                return;
            }
 
            /*
             * In case WriteConsoleW() failed, fall back to writing the
             * message unconverted.
             */
            pfree(utf16);
        }
    }
#else
 
    /*
     * Conversion on non-win32 platforms is not implemented yet. It requires
     * non-throw version of pg_do_encoding_conversion(), that converts
     * unconvertible characters to '?' without errors.
     *
     * XXX: We have a no-throw version now. It doesn't convert to '?' though.
     */
#endif
 
    /*
     * We ignore any error from write() here.  We have no useful way to report
     * it ... certainly whining on stderr isn't likely to be productive.
     */
    rc = write(fileno(stderr), line, len);
    (void) rc;
}
 
/*
 * get_formatted_log_time -- compute and get the log timestamp.
 *
 * The timestamp is computed if not set yet, so as it is kept consistent
 * among all the log destinations that require it to be consistent.  Note
 * that the computed timestamp is returned in a static buffer, not
 * palloc()'d.
 */
char *
get_formatted_log_time(void)
{
    pg_time_t   stamp_time;
    char        msbuf[13];
 
    /* leave if already computed */
    if (formatted_log_time[0] != '\0')
        return formatted_log_time;
 
    if (!saved_timeval_set)
    {
        gettimeofday(&saved_timeval, NULL);
        saved_timeval_set = true;
    }
 
    stamp_time = (pg_time_t) saved_timeval.tv_sec;
 
    /*
     * Note: we expect that guc.c will ensure that log_timezone is set up (at
     * least with a minimal GMT value) before Log_line_prefix can become
     * nonempty or CSV/JSON mode can be selected.
     */
    pg_strftime(formatted_log_time, FORMATTED_TS_LEN,
    /* leave room for milliseconds... */
                "%Y-%m-%d %H:%M:%S     %Z",
                pg_localtime(&stamp_time, log_timezone));
 
    /* 'paste' milliseconds into place... */
    sprintf(msbuf, ".%03d", (int) (saved_timeval.tv_usec / 1000));
    memcpy(formatted_log_time + 19, msbuf, 4);
 
    return formatted_log_time;
}
 
/*
 * reset_formatted_start_time -- reset the start timestamp
 */
void
reset_formatted_start_time(void)
{
    formatted_start_time[0] = '\0';
}
 
/*
 * get_formatted_start_time -- compute and get the start timestamp.
 *
 * The timestamp is computed if not set yet.  Note that the computed
 * timestamp is returned in a static buffer, not palloc()'d.
 */
char *
get_formatted_start_time(void)
{
    pg_time_t   stamp_time = (pg_time_t) MyStartTime;
 
    /* leave if already computed */
    if (formatted_start_time[0] != '\0')
        return formatted_start_time;
 
    /*
     * Note: we expect that guc.c will ensure that log_timezone is set up (at
     * least with a minimal GMT value) before Log_line_prefix can become
     * nonempty or CSV/JSON mode can be selected.
     */
    pg_strftime(formatted_start_time, FORMATTED_TS_LEN,
                "%Y-%m-%d %H:%M:%S %Z",
                pg_localtime(&stamp_time, log_timezone));
 
    return formatted_start_time;
}
 
/*
 * check_log_of_query -- check if a query can be logged
 */
bool
check_log_of_query(ErrorData *edata)
{
    /* log required? */
    if (!is_log_level_output(edata->elevel, log_min_error_statement))
        return false;
 
    /* query log wanted? */
    if (edata->hide_stmt)
        return false;
 
    /* query string available? */
    if (debug_query_string == NULL)
        return false;
 
    return true;
}
 
/*
 * get_backend_type_for_log -- backend type for log entries
 *
 * Returns a pointer to a static buffer, not palloc()'d.
 */
const char *
get_backend_type_for_log(void)
{
    const char *backend_type_str;
 
    if (MyProcPid == PostmasterPid)
        backend_type_str = "postmaster";
    else if (MyBackendType == B_BG_WORKER)
        backend_type_str = MyBgworkerEntry->bgw_type;
    else
        backend_type_str = GetBackendTypeDesc(MyBackendType);
 
    return backend_type_str;
}
 
/*
 * process_log_prefix_padding --- helper function for processing the format
 * string in log_line_prefix
 *
 * Note: This function returns NULL if it finds something which
 * it deems invalid in the format string.
 */
static const char *
process_log_prefix_padding(const char *p, int *ppadding)
{
    int         paddingsign = 1;
    int         padding = 0;
 
    if (*p == '-')
    {
        p++;
 
        if (*p == '\0')         /* Did the buf end in %- ? */
            return NULL;
        paddingsign = -1;
    }
 
    /* generate an int version of the numerical string */
    while (*p >= '0' && *p <= '9')
        padding = padding * 10 + (*p++ - '0');
 
    /* format is invalid if it ends with the padding number */
    if (*p == '\0')
        return NULL;
 
    padding *= paddingsign;
    *ppadding = padding;
    return p;
}
 
/*
 * Format log status information using Log_line_prefix.
 */
static void
log_line_prefix(StringInfo buf, ErrorData *edata)
{
    log_status_format(buf, Log_line_prefix, edata);
}
 
/*
 * Format log status info; append to the provided buffer.
 */
void
log_status_format(StringInfo buf, const char *format, ErrorData *edata)
{
    /* static counter for line numbers */
    static long log_line_number = 0;
 
    /* has counter been reset in current process? */
    static int  log_my_pid = 0;
    int         padding;
    const char *p;
 
    /*
     * This is one of the few places where we'd rather not inherit a static
     * variable's value from the postmaster.  But since we will, reset it when
     * MyProcPid changes. MyStartTime also changes when MyProcPid does, so
     * reset the formatted start timestamp too.
     */
    if (log_my_pid != MyProcPid)
    {
        log_line_number = 0;
        log_my_pid = MyProcPid;
        reset_formatted_start_time();
    }
    log_line_number++;
 
    if (format == NULL)
        return;                 /* in case guc hasn't run yet */
 
    for (p = format; *p != '\0'; p++)
    {
        if (*p != '%')
        {
            /* literal char, just copy */
            appendStringInfoChar(buf, *p);
            continue;
        }
 
        /* must be a '%', so skip to the next char */
        p++;
        if (*p == '\0')
            break;              /* format error - ignore it */
        else if (*p == '%')
        {
            /* string contains %% */
            appendStringInfoChar(buf, '%');
            continue;
        }
 
 
        /*
         * Process any formatting which may exist after the '%'.  Note that
         * process_log_prefix_padding moves p past the padding number if it
         * exists.
         *
         * Note: Since only '-', '0' to '9' are valid formatting characters we
         * can do a quick check here to pre-check for formatting. If the char
         * is not formatting then we can skip a useless function call.
         *
         * Further note: At least on some platforms, passing %*s rather than
         * %s to appendStringInfo() is substantially slower, so many of the
         * cases below avoid doing that unless non-zero padding is in fact
         * specified.
         */
        if (*p > '9')
            padding = 0;
        else if ((p = process_log_prefix_padding(p, &padding)) == NULL)
            break;
 
        /* process the option */
        switch (*p)
        {
            case 'a':
                if (MyProcPort)
                {
                    const char *appname = application_name;
 
                    if (appname == NULL || *appname == '\0')
                        appname = _("[unknown]");
                    if (padding != 0)
                        appendStringInfo(buf, "%*s", padding, appname);
                    else
                        appendStringInfoString(buf, appname);
                }
                else if (padding != 0)
                    appendStringInfoSpaces(buf,
                                           padding > 0 ? padding : -padding);
 
                break;
            case 'b':
                {
                    const char *backend_type_str = get_backend_type_for_log();
 
                    if (padding != 0)
                        appendStringInfo(buf, "%*s", padding, backend_type_str);
                    else
                        appendStringInfoString(buf, backend_type_str);
                    break;
                }
            case 'u':
                if (MyProcPort)
                {
                    const char *username = MyProcPort->user_name;
 
                    if (username == NULL || *username == '\0')
                        username = _("[unknown]");
                    if (padding != 0)
                        appendStringInfo(buf, "%*s", padding, username);
                    else
                        appendStringInfoString(buf, username);
                }
                else if (padding != 0)
                    appendStringInfoSpaces(buf,
                                           padding > 0 ? padding : -padding);
                break;
            case 'd':
                if (MyProcPort)
                {
                    const char *dbname = MyProcPort->database_name;
 
                    if (dbname == NULL || *dbname == '\0')
                        dbname = _("[unknown]");
                    if (padding != 0)
                        appendStringInfo(buf, "%*s", padding, dbname);
                    else
                        appendStringInfoString(buf, dbname);
                }
                else if (padding != 0)
                    appendStringInfoSpaces(buf,
                                           padding > 0 ? padding : -padding);
                break;
            case 'c':
                if (padding != 0)
                {
                    char        strfbuf[128];
 
                    snprintf(strfbuf, sizeof(strfbuf) - 1, "%" PRIx64 ".%x",
                             MyStartTime, MyProcPid);
                    appendStringInfo(buf, "%*s", padding, strfbuf);
                }
                else
                    appendStringInfo(buf, "%" PRIx64 ".%x", MyStartTime, MyProcPid);
                break;
            case 'p':
                if (padding != 0)
                    appendStringInfo(buf, "%*d", padding, MyProcPid);
                else
                    appendStringInfo(buf, "%d", MyProcPid);
                break;
 
            case 'P':
                if (MyProc)
                {
                    PGPROC     *leader = MyProc->lockGroupLeader;
 
                    /*
                     * Show the leader only for active parallel workers. This
                     * leaves out the leader of a parallel group.
                     */
                    if (leader == NULL || leader->pid == MyProcPid)
                        appendStringInfoSpaces(buf,
                                               padding > 0 ? padding : -padding);
                    else if (padding != 0)
                        appendStringInfo(buf, "%*d", padding, leader->pid);
                    else
                        appendStringInfo(buf, "%d", leader->pid);
                }
                else if (padding != 0)
                    appendStringInfoSpaces(buf,
                                           padding > 0 ? padding : -padding);
                break;
 
            case 'l':
                if (padding != 0)
                    appendStringInfo(buf, "%*ld", padding, log_line_number);
                else
                    appendStringInfo(buf, "%ld", log_line_number);
                break;
            case 'm':
                /* force a log timestamp reset */
                formatted_log_time[0] = '\0';
                (void) get_formatted_log_time();
 
                if (padding != 0)
                    appendStringInfo(buf, "%*s", padding, formatted_log_time);
                else
                    appendStringInfoString(buf, formatted_log_time);
                break;
            case 't':
                {
                    pg_time_t   stamp_time = (pg_time_t) time(NULL);
                    char        strfbuf[128];
 
                    pg_strftime(strfbuf, sizeof(strfbuf),
                                "%Y-%m-%d %H:%M:%S %Z",
                                pg_localtime(&stamp_time, log_timezone));
                    if (padding != 0)
                        appendStringInfo(buf, "%*s", padding, strfbuf);
                    else
                        appendStringInfoString(buf, strfbuf);
                }
                break;
            case 'n':
                {
                    char        strfbuf[128];
 
                    if (!saved_timeval_set)
                    {
                        gettimeofday(&saved_timeval, NULL);
                        saved_timeval_set = true;
                    }
 
                    snprintf(strfbuf, sizeof(strfbuf), "%ld.%03d",
                             (long) saved_timeval.tv_sec,
                             (int) (saved_timeval.tv_usec / 1000));
 
                    if (padding != 0)
                        appendStringInfo(buf, "%*s", padding, strfbuf);
                    else
                        appendStringInfoString(buf, strfbuf);
                }
                break;
            case 's':
                {
                    char       *start_time = get_formatted_start_time();
 
                    if (padding != 0)
                        appendStringInfo(buf, "%*s", padding, start_time);
                    else
                        appendStringInfoString(buf, start_time);
                }
                break;
            case 'i':
                if (MyProcPort)
                {
                    const char *psdisp;
                    int         displen;
 
                    psdisp = get_ps_display(&displen);
                    if (padding != 0)
                        appendStringInfo(buf, "%*s", padding, psdisp);
                    else
                        appendBinaryStringInfo(buf, psdisp, displen);
                }
                else if (padding != 0)
                    appendStringInfoSpaces(buf,
                                           padding > 0 ? padding : -padding);
                break;
            case 'L':
                {
                    const char *local_host;
 
                    if (MyProcPort)
                    {
                        if (MyProcPort->local_host[0] == '\0')
                        {
                            /*
                             * First time through: cache the lookup, since it
                             * might not have trivial cost.
                             */
                            (void) pg_getnameinfo_all(&MyProcPort->laddr.addr,
                                                      MyProcPort->laddr.salen,
                                                      MyProcPort->local_host,
                                                      sizeof(MyProcPort->local_host),
                                                      NULL, 0,
                                                      NI_NUMERICHOST | NI_NUMERICSERV);
                        }
                        local_host = MyProcPort->local_host;
                    }
                    else
                    {
                        /* Background process, or connection not yet made */
                        local_host = "[none]";
                    }
                    if (padding != 0)
                        appendStringInfo(buf, "%*s", padding, local_host);
                    else
                        appendStringInfoString(buf, local_host);
                }
                break;
            case 'r':
                if (MyProcPort && MyProcPort->remote_host)
                {
                    if (padding != 0)
                    {
                        if (MyProcPort->remote_port && MyProcPort->remote_port[0] != '\0')
                        {
                            /*
                             * This option is slightly special as the port
                             * number may be appended onto the end. Here we
                             * need to build 1 string which contains the
                             * remote_host and optionally the remote_port (if
                             * set) so we can properly align the string.
                             */
 
                            char       *hostport;
 
                            hostport = psprintf("%s(%s)", MyProcPort->remote_host, MyProcPort->remote_port);
                            appendStringInfo(buf, "%*s", padding, hostport);
                            pfree(hostport);
                        }
                        else
                            appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host);
                    }
                    else
                    {
                        /* padding is 0, so we don't need a temp buffer */
                        appendStringInfoString(buf, MyProcPort->remote_host);
                        if (MyProcPort->remote_port &&
                            MyProcPort->remote_port[0] != '\0')
                            appendStringInfo(buf, "(%s)",
                                             MyProcPort->remote_port);
                    }
                }
                else if (padding != 0)
                    appendStringInfoSpaces(buf,
                                           padding > 0 ? padding : -padding);
                break;
            case 'h':
                if (MyProcPort && MyProcPort->remote_host)
                {
                    if (padding != 0)
                        appendStringInfo(buf, "%*s", padding, MyProcPort->remote_host);
                    else
                        appendStringInfoString(buf, MyProcPort->remote_host);
                }
                else if (padding != 0)
                    appendStringInfoSpaces(buf,
                                           padding > 0 ? padding : -padding);
                break;
            case 'q':
                /* in postmaster and friends, stop if %q is seen */
                /* in a backend, just ignore */
                if (MyProcPort == NULL)
                    return;
                break;
            case 'v':
                /* keep VXID format in sync with lockfuncs.c */
                if (MyProc != NULL && MyProc->vxid.procNumber != INVALID_PROC_NUMBER)
                {
                    if (padding != 0)
                    {
                        char        strfbuf[128];
 
                        snprintf(strfbuf, sizeof(strfbuf) - 1, "%d/%u",
                                 MyProc->vxid.procNumber, MyProc->vxid.lxid);
                        appendStringInfo(buf, "%*s", padding, strfbuf);
                    }
                    else
                        appendStringInfo(buf, "%d/%u", MyProc->vxid.procNumber, MyProc->vxid.lxid);
                }
                else if (padding != 0)
                    appendStringInfoSpaces(buf,
                                           padding > 0 ? padding : -padding);
                break;
            case 'x':
                if (padding != 0)
                    appendStringInfo(buf, "%*u", padding, GetTopTransactionIdIfAny());
                else
                    appendStringInfo(buf, "%u", GetTopTransactionIdIfAny());
                break;
            case 'e':
                if (padding != 0)
                    appendStringInfo(buf, "%*s", padding, unpack_sql_state(edata->sqlerrcode));
                else
                    appendStringInfoString(buf, unpack_sql_state(edata->sqlerrcode));
                break;
            case 'Q':
                if (padding != 0)
                    appendStringInfo(buf, "%*" PRId64, padding,
                                     pgstat_get_my_query_id());
                else
                    appendStringInfo(buf, "%" PRId64,
                                     pgstat_get_my_query_id());
                break;
            default:
                /* format error - ignore it */
                break;
        }
    }
}
 
/*
 * Unpack MAKE_SQLSTATE code. Note that this returns a pointer to a
 * static buffer.
 */
char *
unpack_sql_state(int sql_state)
{
    static char buf[12];
    int         i;
 
    for (i = 0; i < 5; i++)
    {
        buf[i] = PGUNSIXBIT(sql_state);
        sql_state >>= 6;
    }
 
    buf[i] = '\0';
    return buf;
}
 
 
/*
 * Write error report to server's log
 */
static void
send_message_to_server_log(ErrorData *edata)
{
    StringInfoData buf;
    bool        fallback_to_stderr = false;
 
    initStringInfo(&buf);
 
    log_line_prefix(&buf, edata);
    appendStringInfo(&buf, "%s:  ", _(error_severity(edata->elevel)));
 
    if (Log_error_verbosity >= PGERROR_VERBOSE)
        appendStringInfo(&buf, "%s: ", unpack_sql_state(edata->sqlerrcode));
 
    if (edata->message)
        append_with_tabs(&buf, edata->message);
    else
        append_with_tabs(&buf, _("missing error text"));
 
    if (edata->cursorpos > 0)
        appendStringInfo(&buf, _(" at character %d"),
                         edata->cursorpos);
    else if (edata->internalpos > 0)
        appendStringInfo(&buf, _(" at character %d"),
                         edata->internalpos);
 
    appendStringInfoChar(&buf, '\n');
 
    if (Log_error_verbosity >= PGERROR_DEFAULT)
    {
        if (edata->detail_log)
        {
            log_line_prefix(&buf, edata);
            appendStringInfoString(&buf, _("DETAIL:  "));
            append_with_tabs(&buf, edata->detail_log);
            appendStringInfoChar(&buf, '\n');
        }
        else if (edata->detail)
        {
            log_line_prefix(&buf, edata);
            appendStringInfoString(&buf, _("DETAIL:  "));
            append_with_tabs(&buf, edata->detail);
            appendStringInfoChar(&buf, '\n');
        }
        if (edata->hint)
        {
            log_line_prefix(&buf, edata);
            appendStringInfoString(&buf, _("HINT:  "));
            append_with_tabs(&buf, edata->hint);
            appendStringInfoChar(&buf, '\n');
        }
        if (edata->internalquery)
        {
            log_line_prefix(&buf, edata);
            appendStringInfoString(&buf, _("QUERY:  "));
            append_with_tabs(&buf, edata->internalquery);
            appendStringInfoChar(&buf, '\n');
        }
        if (edata->context && !edata->hide_ctx)
        {
            log_line_prefix(&buf, edata);
            appendStringInfoString(&buf, _("CONTEXT:  "));
            append_with_tabs(&buf, edata->context);
            appendStringInfoChar(&buf, '\n');
        }
        if (Log_error_verbosity >= PGERROR_VERBOSE)
        {
            /* assume no newlines in funcname or filename... */
            if (edata->funcname && edata->filename)
            {
                log_line_prefix(&buf, edata);
                appendStringInfo(&buf, _("LOCATION:  %s, %s:%d\n"),
                                 edata->funcname, edata->filename,
                                 edata->lineno);
            }
            else if (edata->filename)
            {
                log_line_prefix(&buf, edata);
                appendStringInfo(&buf, _("LOCATION:  %s:%d\n"),
                                 edata->filename, edata->lineno);
            }
        }
        if (edata->backtrace)
        {
            log_line_prefix(&buf, edata);
            appendStringInfoString(&buf, _("BACKTRACE:  "));
            append_with_tabs(&buf, edata->backtrace);
            appendStringInfoChar(&buf, '\n');
        }
    }
 
    /*
     * If the user wants the query that generated this error logged, do it.
     */
    if (check_log_of_query(edata))
    {
        log_line_prefix(&buf, edata);
        appendStringInfoString(&buf, _("STATEMENT:  "));
        append_with_tabs(&buf, debug_query_string);
        appendStringInfoChar(&buf, '\n');
    }
 
#ifdef HAVE_SYSLOG
    /* Write to syslog, if enabled */
    if (Log_destination & LOG_DESTINATION_SYSLOG)
    {
        int         syslog_level;
 
        switch (edata->elevel)
        {
            case DEBUG5:
            case DEBUG4:
            case DEBUG3:
            case DEBUG2:
            case DEBUG1:
                syslog_level = LOG_DEBUG;
                break;
            case LOG:
            case LOG_SERVER_ONLY:
            case INFO:
                syslog_level = LOG_INFO;
                break;
            case NOTICE:
            case WARNING:
            case WARNING_CLIENT_ONLY:
                syslog_level = LOG_NOTICE;
                break;
            case ERROR:
                syslog_level = LOG_WARNING;
                break;
            case FATAL:
                syslog_level = LOG_ERR;
                break;
            case PANIC:
            default:
                syslog_level = LOG_CRIT;
                break;
        }
 
        write_syslog(syslog_level, buf.data);
    }
#endif                          /* HAVE_SYSLOG */
 
#ifdef WIN32
    /* Write to eventlog, if enabled */
    if (Log_destination & LOG_DESTINATION_EVENTLOG)
    {
        write_eventlog(edata->elevel, buf.data, buf.len);
    }
#endif                          /* WIN32 */
 
    /* Write to csvlog, if enabled */
    if (Log_destination & LOG_DESTINATION_CSVLOG)
    {
        /*
         * Send CSV data if it's safe to do so (syslogger doesn't need the
         * pipe).  If this is not possible, fallback to an entry written to
         * stderr.
         */
        if (redirection_done || MyBackendType == B_LOGGER)
            write_csvlog(edata);
        else
            fallback_to_stderr = true;
    }
 
    /* Write to JSON log, if enabled */
    if (Log_destination & LOG_DESTINATION_JSONLOG)
    {
        /*
         * Send JSON data if it's safe to do so (syslogger doesn't need the
         * pipe).  If this is not possible, fallback to an entry written to
         * stderr.
         */
        if (redirection_done || MyBackendType == B_LOGGER)
        {
            write_jsonlog(edata);
        }
        else
            fallback_to_stderr = true;
    }
 
    /*
     * Write to stderr, if enabled or if required because of a previous
     * limitation.
     */
    if ((Log_destination & LOG_DESTINATION_STDERR) ||
        whereToSendOutput == DestDebug ||
        fallback_to_stderr)
    {
        /*
         * Use the chunking protocol if we know the syslogger should be
         * catching stderr output, and we are not ourselves the syslogger.
         * Otherwise, just do a vanilla write to stderr.
         */
        if (redirection_done && MyBackendType != B_LOGGER)
            write_pipe_chunks(buf.data, buf.len, LOG_DESTINATION_STDERR);
#ifdef WIN32
 
        /*
         * In a win32 service environment, there is no usable stderr. Capture
         * anything going there and write it to the eventlog instead.
         *
         * If stderr redirection is active, it was OK to write to stderr above
         * because that's really a pipe to the syslogger process.
         */
        else if (pgwin32_is_service())
            write_eventlog(edata->elevel, buf.data, buf.len);
#endif
        else
            write_console(buf.data, buf.len);
    }
 
    /* If in the syslogger process, try to write messages direct to file */
    if (MyBackendType == B_LOGGER)
        write_syslogger_file(buf.data, buf.len, LOG_DESTINATION_STDERR);
 
    /* No more need of the message formatted for stderr */
    pfree(buf.data);
}
 
/*
 * Send data to the syslogger using the chunked protocol
 *
 * Note: when there are multiple backends writing into the syslogger pipe,
 * it's critical that each write go into the pipe indivisibly, and not
 * get interleaved with data from other processes.  Fortunately, the POSIX
 * spec requires that writes to pipes be atomic so long as they are not
 * more than PIPE_BUF bytes long.  So we divide long messages into chunks
 * that are no more than that length, and send one chunk per write() call.
 * The collector process knows how to reassemble the chunks.
 *
 * Because of the atomic write requirement, there are only two possible
 * results from write() here: -1 for failure, or the requested number of
 * bytes.  There is not really anything we can do about a failure; retry would
 * probably be an infinite loop, and we can't even report the error usefully.
 * (There is noplace else we could send it!)  So we might as well just ignore
 * the result from write().  However, on some platforms you get a compiler
 * warning from ignoring write()'s result, so do a little dance with casting
 * rc to void to shut up the compiler.
 */
void
write_pipe_chunks(char *data, int len, int dest)
{
    PipeProtoChunk p;
    int         fd = fileno(stderr);
    int         rc;
 
    Assert(len > 0);
 
    p.proto.nuls[0] = p.proto.nuls[1] = '\0';
    p.proto.pid = MyProcPid;
    p.proto.flags = 0;
    if (dest == LOG_DESTINATION_STDERR)
        p.proto.flags |= PIPE_PROTO_DEST_STDERR;
    else if (dest == LOG_DESTINATION_CSVLOG)
        p.proto.flags |= PIPE_PROTO_DEST_CSVLOG;
    else if (dest == LOG_DESTINATION_JSONLOG)
        p.proto.flags |= PIPE_PROTO_DEST_JSONLOG;
 
    /* write all but the last chunk */
    while (len > PIPE_MAX_PAYLOAD)
    {
        /* no need to set PIPE_PROTO_IS_LAST yet */
        p.proto.len = PIPE_MAX_PAYLOAD;
        memcpy(p.proto.data, data, PIPE_MAX_PAYLOAD);
        rc = write(fd, &p, PIPE_HEADER_SIZE + PIPE_MAX_PAYLOAD);
        (void) rc;
        data += PIPE_MAX_PAYLOAD;
        len -= PIPE_MAX_PAYLOAD;
    }
 
    /* write the last chunk */
    p.proto.flags |= PIPE_PROTO_IS_LAST;
    p.proto.len = len;
    memcpy(p.proto.data, data, len);
    rc = write(fd, &p, PIPE_HEADER_SIZE + len);
    (void) rc;
}
 
 
/*
 * Append a text string to the error report being built for the client.
 *
 * This is ordinarily identical to pq_sendstring(), but if we are in
 * error recursion trouble we skip encoding conversion, because of the
 * possibility that the problem is a failure in the encoding conversion
 * subsystem itself.  Code elsewhere should ensure that the passed-in
 * strings will be plain 7-bit ASCII, and thus not in need of conversion,
 * in such cases.  (In particular, we disable localization of error messages
 * to help ensure that's true.)
 */
static void
err_sendstring(StringInfo buf, const char *str)
{
    if (in_error_recursion_trouble())
        pq_send_ascii_string(buf, str);
    else
        pq_sendstring(buf, str);
}
 
/*
 * Write error report to client
 */
static void
send_message_to_frontend(ErrorData *edata)
{
    StringInfoData msgbuf;
 
    /*
     * We no longer support pre-3.0 FE/BE protocol, except here.  If a client
     * tries to connect using an older protocol version, it's nice to send the
     * "protocol version not supported" error in a format the client
     * understands.  If protocol hasn't been set yet, early in backend
     * startup, assume modern protocol.
     */
    if (PG_PROTOCOL_MAJOR(FrontendProtocol) >= 3 || FrontendProtocol == 0)
    {
        /* New style with separate fields */
        const char *sev;
        char        tbuf[12];
 
        /* 'N' (Notice) is for nonfatal conditions, 'E' is for errors */
        if (edata->elevel < ERROR)
            pq_beginmessage(&msgbuf, PqMsg_NoticeResponse);
        else
            pq_beginmessage(&msgbuf, PqMsg_ErrorResponse);
 
        sev = error_severity(edata->elevel);
        pq_sendbyte(&msgbuf, PG_DIAG_SEVERITY);
        err_sendstring(&msgbuf, _(sev));
        pq_sendbyte(&msgbuf, PG_DIAG_SEVERITY_NONLOCALIZED);
        err_sendstring(&msgbuf, sev);
 
        pq_sendbyte(&msgbuf, PG_DIAG_SQLSTATE);
        err_sendstring(&msgbuf, unpack_sql_state(edata->sqlerrcode));
 
        /* M field is required per protocol, so always send something */
        pq_sendbyte(&msgbuf, PG_DIAG_MESSAGE_PRIMARY);
        if (edata->message)
            err_sendstring(&msgbuf, edata->message);
        else
            err_sendstring(&msgbuf, _("missing error text"));
 
        if (edata->detail)
        {
            pq_sendbyte(&msgbuf, PG_DIAG_MESSAGE_DETAIL);
            err_sendstring(&msgbuf, edata->detail);
        }
 
        /* detail_log is intentionally not used here */
 
        if (edata->hint)
        {
            pq_sendbyte(&msgbuf, PG_DIAG_MESSAGE_HINT);
            err_sendstring(&msgbuf, edata->hint);
        }
 
        if (edata->context)
        {
            pq_sendbyte(&msgbuf, PG_DIAG_CONTEXT);
            err_sendstring(&msgbuf, edata->context);
        }
 
        if (edata->schema_name)
        {
            pq_sendbyte(&msgbuf, PG_DIAG_SCHEMA_NAME);
            err_sendstring(&msgbuf, edata->schema_name);
        }
 
        if (edata->table_name)
        {
            pq_sendbyte(&msgbuf, PG_DIAG_TABLE_NAME);
            err_sendstring(&msgbuf, edata->table_name);
        }
 
        if (edata->column_name)
        {
            pq_sendbyte(&msgbuf, PG_DIAG_COLUMN_NAME);
            err_sendstring(&msgbuf, edata->column_name);
        }
 
        if (edata->datatype_name)
        {
            pq_sendbyte(&msgbuf, PG_DIAG_DATATYPE_NAME);
            err_sendstring(&msgbuf, edata->datatype_name);
        }
 
        if (edata->constraint_name)
        {
            pq_sendbyte(&msgbuf, PG_DIAG_CONSTRAINT_NAME);
            err_sendstring(&msgbuf, edata->constraint_name);
        }
 
        if (edata->cursorpos > 0)
        {
            snprintf(tbuf, sizeof(tbuf), "%d", edata->cursorpos);
            pq_sendbyte(&msgbuf, PG_DIAG_STATEMENT_POSITION);
            err_sendstring(&msgbuf, tbuf);
        }
 
        if (edata->internalpos > 0)
        {
            snprintf(tbuf, sizeof(tbuf), "%d", edata->internalpos);
            pq_sendbyte(&msgbuf, PG_DIAG_INTERNAL_POSITION);
            err_sendstring(&msgbuf, tbuf);
        }
 
        if (edata->internalquery)
        {
            pq_sendbyte(&msgbuf, PG_DIAG_INTERNAL_QUERY);
            err_sendstring(&msgbuf, edata->internalquery);
        }
 
        if (edata->filename)
        {
            pq_sendbyte(&msgbuf, PG_DIAG_SOURCE_FILE);
            err_sendstring(&msgbuf, edata->filename);
        }
 
        if (edata->lineno > 0)
        {
            snprintf(tbuf, sizeof(tbuf), "%d", edata->lineno);
            pq_sendbyte(&msgbuf, PG_DIAG_SOURCE_LINE);
            err_sendstring(&msgbuf, tbuf);
        }
 
        if (edata->funcname)
        {
            pq_sendbyte(&msgbuf, PG_DIAG_SOURCE_FUNCTION);
            err_sendstring(&msgbuf, edata->funcname);
        }
 
        pq_sendbyte(&msgbuf, '\0'); /* terminator */
 
        pq_endmessage(&msgbuf);
    }
    else
    {
        /* Old style --- gin up a backwards-compatible message */
        StringInfoData buf;
 
        initStringInfo(&buf);
 
        appendStringInfo(&buf, "%s:  ", _(error_severity(edata->elevel)));
 
        if (edata->message)
            appendStringInfoString(&buf, edata->message);
        else
            appendStringInfoString(&buf, _("missing error text"));
 
        appendStringInfoChar(&buf, '\n');
 
        /* 'N' (Notice) is for nonfatal conditions, 'E' is for errors */
        pq_putmessage_v2((edata->elevel < ERROR) ? 'N' : 'E', buf.data, buf.len + 1);
 
        pfree(buf.data);
    }
 
    /*
     * This flush is normally not necessary, since postgres.c will flush out
     * waiting data when control returns to the main loop. But it seems best
     * to leave it here, so that the client has some clue what happened if the
     * backend dies before getting back to the main loop ... error/notice
     * messages should not be a performance-critical path anyway, so an extra
     * flush won't hurt much ...
     */
    pq_flush();
}
 
 
/*
 * Support routines for formatting error messages.
 */
 
 
/*
 * error_severity --- get string representing elevel
 *
 * The string is not localized here, but we mark the strings for translation
 * so that callers can invoke _() on the result.
 */
const char *
error_severity(int elevel)
{
    const char *prefix;
 
    switch (elevel)
    {
        case DEBUG1:
        case DEBUG2:
        case DEBUG3:
        case DEBUG4:
        case DEBUG5:
            prefix = gettext_noop("DEBUG");
            break;
        case LOG:
        case LOG_SERVER_ONLY:
            prefix = gettext_noop("LOG");
            break;
        case INFO:
            prefix = gettext_noop("INFO");
            break;
        case NOTICE:
            prefix = gettext_noop("NOTICE");
            break;
        case WARNING:
        case WARNING_CLIENT_ONLY:
            prefix = gettext_noop("WARNING");
            break;
        case ERROR:
            prefix = gettext_noop("ERROR");
            break;
        case FATAL:
            prefix = gettext_noop("FATAL");
            break;
        case PANIC:
            prefix = gettext_noop("PANIC");
            break;
        default:
            prefix = "???";
            break;
    }
 
    return prefix;
}
 
 
/*
 *  append_with_tabs
 *
 *  Append the string to the StringInfo buffer, inserting a tab after any
 *  newline.
 */
static void
append_with_tabs(StringInfo buf, const char *str)
{
    char        ch;
 
    while ((ch = *str++) != '\0')
    {
        appendStringInfoCharMacro(buf, ch);
        if (ch == '\n')
            appendStringInfoCharMacro(buf, '\t');
    }
}
 
 
/*
 * Write errors to stderr (or by equal means when stderr is
 * not available). Used before ereport/elog can be used
 * safely (memory context, GUC load etc)
 */
void
write_stderr(const char *fmt,...)
{
    va_list     ap;
 
    va_start(ap, fmt);
    vwrite_stderr(fmt, ap);
    va_end(ap);
}
 
 
/*
 * Write errors to stderr (or by equal means when stderr is
 * not available) - va_list version
 */
void
vwrite_stderr(const char *fmt, va_list ap)
{
#ifdef WIN32
    char        errbuf[2048];   /* Arbitrary size? */
#endif
 
    fmt = _(fmt);
#ifndef WIN32
    /* On Unix, we just fprintf to stderr */
    vfprintf(stderr, fmt, ap);
    fflush(stderr);
#else
    vsnprintf(errbuf, sizeof(errbuf), fmt, ap);
 
    /*
     * On Win32, we print to stderr if running on a console, or write to
     * eventlog if running as a service
     */
    if (pgwin32_is_service())   /* Running as a service */
    {
        write_eventlog(ERROR, errbuf, strlen(errbuf));
    }
    else
    {
        /* Not running as service, write to stderr */
        write_console(errbuf, strlen(errbuf));
        fflush(stderr);
    }
#endif
}