i am new to vhdl. i have a code with me as follows (the sub prog compiles very fine). i can't fix the following error
** Error: C:/Users/acer/Desktop/alu new/ALU_VHDL.vhd(110): Illegal sequential statement. ** Error: C:/Users/acer/Desktop/alu new/ALU_VHDL.vhd(115): Illegal sequential statement. ** Error: C:/Users/acer/Desktop/alu new/ALU_VHDL.vhd(120): Illegal sequential statement. ** Error: C:/Users/acer/Desktop/alu new/ALU_VHDL.vhd(128): Illegal sequential statement. ** Warning: [14] C:/Users/acer/Desktop/alu new/ALU_VHDL.vhd(128): (vcom-1272) Length of formal "Remainder" is 4; length of actual is 8.
** Error: C:/Users/acer/Desktop/alu new/ALU_VHDL.vhd(138): VHDL Compiler exiting
the line nos are bold ones in the code here.they are the portmap ones Can anyone please help me out with this. it would be very kind of you.
library IEEE;
use IEEE.STD_LOGIC_1164.ALL;
use IEEE.NUMERIC_STD.ALL;
entity ALU_VHDL is
port
(
OperandA : in std_logic_vector(3 downto 0);
OperandB : in std_logic_vector(3 downto 0);
Operation: in std_logic_vector(2 downto 0);
Startt : in std_logic;
Ready : out std_logic;
Result_High : out std_logic_vector(3 downto 0);
Result_Low : out std_logic_vector(7 downto 0);
Errorsig : out std_logic;
Reset_n : in std_logic;
Clkk : in std_logic);
end entity ALU_VHDL;
architecture Behavioral of ALU_VHDL is
-- And gate
component AND_gate
port(
x,y : IN std_logic_vector(3 downto 0);
z : OUT std_logic_vector(3 downto 0));
end component;
-- OR Gate
component OR_gate
port(
x,y : IN std_logic_vector(3 downto 0);
z : OUT std_logic_vector(3 downto 0));
end component;
-- XOR gate
component XOR_gate
port(
x,y : IN std_logic_vector(3 downto 0);
z : OUT std_logic_vector(3 downto 0));
end component;
-- Adder
COMPONENT adder4
PORT
(
C : IN std_logic;
x,y : IN std_logic_vector(3 DOWNTO 0);
R : OUT std_logic_vector(3 DOWNTO 0);
C_out : OUT std_logic);
END COMPONENT;
-- Subtractor
COMPONENT Substractor4
PORT
(
br_in : IN std_logic;
x,y : IN std_logic_vector(3 DOWNTO 0);
R : OUT std_logic_vector(3 DOWNTO 0);
E : out std_logic);
END COMPONENT;
-- Multiplier
COMPONENT mult4by4
port(operA, operB: in std_logic_vector(3 downto 0);
sumOut: out std_logic_vector(7 downto 0));
END COMPONENT;
-- Division
COMPONENT Division
Port ( Dividend : in std_logic_vector(3 downto 0);
Divisor : in std_logic_vector(3 downto 0);
Start : in std_logic;
Clk : in std_logic;
Quotient : out std_logic_vector(3 downto 0);
Remainder : out std_logic_vector(3 downto 0);
Finish : out std_logic);
END COMPONENT;
begin
process(OperandA, OperandB, Startt, Operation) is
begin
case Operation is
when "000" =>
Result_High <= "XXXX";
when "001" =>
Result_High <= OperandA and OperandB;
when "010" =>
Result_High <= OperandA or OperandB;
when "011" =>
Result_High <= OperandA xor OperandB;
when "100" =>
-- Adder
**U05 : adder4 PORT MAP (C=>Startt,x=>OperandA,y=>OperandB,R=>Result_High,C_out=>Ready);**
when "101" =>
-- Substractor & Error signal
**U06 : Substractor4 PORT MAP (br_in=>Startt,x=>OperandA,y=>OperandB,R=>Result_High,E=>Errorsig);**
when "110" =>
-- multiplication
**U07 : mult4by4 PORT MAP (operA=>OperandA,operB=>OperandB,sumOut=>Result_Low);**
when "111" =>
-- Division
if (OperandB ="0000") then
Errorsig <= '1';
else
**U08 : Division PORT MAP (Dividend=>OperandA,Divisor=>OperandB,Start=>Startt,Clk=>Clkk,Quotient=>Result_High,Remainder=>Result_Low,Finish=>Ready);**
end if;
when others =>
Errorsig <= '1';
end case;
end process;
end architecture Behavioral;
portmap?